Abstract:TiAl alloys with fully lamellar structure has been intensively studied for excellent fracture toughness and creep properties. Directional solidification is an effective way to control the lamellar structure. Thus it is important to investigate the effect of solidification parameters on the structure of TiAl alloys during directional solidification. In this work, microstructures of directionally solidified Ti-46Al-2Cr-2Nb (atomic fraction, %) alloy has been investigated through Bridgman-type directional solidification experiment at constant temperature gradient and wide range of growth rates (v=10-120 mu m/s). The type of primary phase, the primary dendritic arm spacing (lambda(1)), the secondary dendritic arm spacing (lambda(2)) and the lamellar spacing (lambda(e)) are investigated. It is found that: the primary phase of the specimens transformed from beta phase to alpha phase with the increase of growth rates; the transformation trend of primary phases with growth rates can be predicted by the phase selection model based on the highest interface temperature criterion. lambda(1), lambda(2), and lambda(e) all decrease with the increasing of v. The relationship between lambda(1) and v is not affected by the transformation of primary phases, which follows lambda(1)=700.6v(-0.24) relationship. However the relationship between lambda(2) and v is associated with the type of primary phases, lambda(2) and v follows lambda(2)=44.07) (110 relationship when is the primary phases, while follows lambda(2)=57.3v.23 relationship when the primary phase has transformed to a phase. The relationship between lambda(e) and v can be expressed by lambda(e)=16.4v.76. Compared with TiAl binary alloys, lamellar spacing is more effectively refined by increasing the growth rates in Ti-46Al-2Cr-2Nb alloy.

Effects of lamellar spacing on microstructural stability and creep properties in β-solidifying γ-TiAl alloy by directional solidification

Improvement of the Creep Lifetimes and Microstructural Stability of Β-Solidifying Γ-Tial by Cold Crucible Directional Solidification

Microstructure Control and Creep Behavior of Ti-47Al-6Nb-0.1C Alloy by Directional Solidification

The microstructure evolution and phase transformation behavior of a β-solidifying γ-TiAl alloy during creep

Effects of Alloying Elements on Creep of TiAl Alloys with a Fine Lamellar Structure

The microstructure evolution and phase transformation behavior of a -solidifying ?-TiAl alloy during creep

Creep Behavior of High‐Nb TiAl Alloy at 800–900 °C by Directional Solidification

Microstructure, Mechanical Properties, and Crack Propagation Behavior in High-Nb TiAl Alloys by Directional Solidification

Tensile properties and high temperature creep behavior of microalloyed Ti–Ti3Al–Nb alloys by directional solidification

EFFECTS OF GROWTH RATE ON PRIMARY PHASE AND MICROSTRUCTURES OF DIRECTIONALLY SOLIDIFIED Ti-46Al-2Cr-2Nb ALLOY

Microstructure, Tensile Properties and Creep Behavior of High-Al TiAlNb Alloy Using Electromagnetic Cold Crucible Continuous Casting

Effects of alloying elements on creep of tiai alloys with fine lamellar structures

Creep Behavior Of High-Nb Tial Alloy At 800-900 Degrees C By Directional Solidification

Microstructural stability and creep properties of middle Nb γ-TiAl alloy with a modulated microstructure

Effect of solidification parameters on microstructural characteristics and mechanical properties of directionally solidified binary TiAl alloy

Effects of Tailoring Microstructure on Short-Term Creep Behavior of High Nb Containing TiAl Alloys under Various Stress Levels

Enhanced High Temperature Tensile and Creep Properties of a Β-Solidified Γ-Tial Alloy with the Hybrid Addition of C and Y2O3

The Directional Solidification, Microstructural Characterization and Deformation Behavior of Β-Solidifying TiAl Alloy

Effect of Growth Rate on Microstructure Evolution in Directionally Solidified Ti–47Al Alloy

High-temperature Deformation Resistance and Creep Resistance of a TiAl-based Alloy Fabricated by Coldcrucible Directional Solidification Technology

Brittle–ductile Transition During Creep in Nearly and Fully Lamellar High-Nb TiAl Alloys