Abstract:Polymer-based film capacitors with ultra-fast discharge rate and high-power density play a key role in many fields, such as pulsed power technology, advanced electric and electronic systems. In this paper, the flexible all-organic composite films with thermoplastic polyurethanes (TPU) and poly(vinylidene fluoride-co-hexafluoropropene) (P(VDF-HFP)) are prepared by a solution coating method, combined with a variety of characterization methods to systematically study the microscopic properties, dielectric properties, insulation properties, energy storage properties and mechanical properties of the composite films. The typical experimental procedure for the fabrication of all-organic composite films is as follows: First, the TPU and P(VDF-HFP) pellets were dried in the oven for 24 h. Then, 1 g P(VDF-HFP) and corresponding TPU (0, 1% (phi), 2% (phi), 3% (phi), 4% (phi), 5% (phi)) were added into 10 mL N,N-dimethylformamide (DMF) solution, and were stirred vigorously at room temperature for 24 h. The mixtures were moved into vacuum oven for 30 min to eliminate the air. The solutions were cast onto a clean glass, and finally were dried at 70 degrees C for 12 h to obtain the TPU/P(VDF-HFP) films. Systematic observation and tested results show that: adding an appropriate amount of thermoplastic polyurethane to P(VDF-HFP) can form a two-phase cross-linked structure with excellent dispersibility and compatibility, thereby further improving the electrical, energy storage, and mechanical properties of the composite films. In TPU/P(VDF-HFP) composite film with 2% (phi) TPU, the characteristic breakdown strength of the composite film is 450 MV/m, and the corresponding discharge energy density is 7.03 J/cm(3), which are increased by 25.35% and 49% compared to the pristine film, respectively. Moreover, the mechanical properties of the composite films have been improved to a certain extent owing to the addition of TPU, and the Young's modulus, tensile strength and elongation at break of the TPU-2% (phi)/P(VDF-HFP) composite film reaches 591.22 MPa, 25.6 MPa, and 362%, respectively. Through the above characterization and analysis, it can be found that adding elastomer rubber to the ferroelectric polymers can form flexible dielectric materials with high breakdown strength, high energy density as well as high charge-discharge efficiency, which is expected to have better applications in large-scale industrial production for film capacitors.

Composite of P(VDF‐CTFE) and Aromatic Polythiourea for Capacitors with High‐capacity, High‐efficiency, and Fast Response

Crosslinked P(Vdf-Ctfe)/Ps-Cooh Nanocomposites for High-Energy-Density Capacitor Application

Poly(vinylidene Fluoride-Co-chlorotrifluoroethylene) and Polyurea Composite with Enhanced Energy Storage Properties

Ultrahigh polar phase content PVDF-based composite films with ultralow filler loading for high-energy-density flexible capacitors

Preparation and Characterization of All-organic TPU/P(VDF-HFP)Flexible Composite Films with High Energy Storage

Poly(vinylidene Fluoride) Terpolymer and Poly(methyl Methacrylate) Composite Films with Superior Energy Storage Performance for Electrostatic Capacitor Application

A Trilayer Polymer Composite with Macroscopic Gradient Dielectric Constant Distribution for Advanced Energy Storage Capacitors

Interesting Influence of Different Inorganic Particles on the Energy Storage Performance of a Polyethersulfone-Based Dielectric Composite

Tunable Dielectric Polarization and Breakdown Behavior for High Energy Storage Capability in P(VDF-TrFE-CFE)/PVDF Polymer Blended Composite Films.

Tuning the MOF-derived Fe fillers and crystal structure of PVDF composites for enhancement of their energy storage density

Relaxor-like Dielectric Behavior and Its Effect on Energy Storage Performance in P(TFE-HFP-VDF) Terpolymers

All-Organic PTFE Coated PVDF Composite Film Exhibiting Low Conduction Loss and High Breakdown Strength for Energy Storage Applications

All Polymer Dielectric Films for Achieving High Energy Density Film Capacitors by Blending Poly(Vinylidene Fluoride-Trifluoroethylene-Chlorofluoroethylene) with Aromatic Polythiourea

Simultaneously achieving high discharge energy density and discharge efficiency in P(VDF-CTFE)/PVDF based nanocomposites through topological-structure design and proper doping composition modulation

Structure, Dielectric, Ferroelectric, and Energy Density Properties of Polyethersulfone-Based Composite for Energy Storage Application

Poly (vinylidene Fluoride-Chlorotrifluoroethylene)/Batio3 Composites with High Electrical Energy Density

Interface‐Tailored Relaxor Ferroelectric Nanocomposites with Ultrahigh‐Insulation Shell of Fluorinated Aromatic Polythiourea for High‐Capacitance Energy Storage Applications

High Field Antiferroelectric-like Dielectric of Ploy(vinylidene fluoride-co-trifluoroethylene-co-chlorotrifluoroethylene)-graft-Poly(styrene-methyl methacrylate) for High Pulse Capacitors with High Energy Density and Low Loss

Enhanced Energy Density and Efficiency of All-Organic Composites by Designing a Multilayer Gradient Structure

Recent Development of High Energy Density Polymers for Dielectric Capacitors

Sandwich-structured Polymer Dielectric Composite Films for Improving Breakdown Strength and Energy Density at High Temperature