Abstract:Dielectric capacitor is an important component of power systems, but its low dielectric polarization and undesirable dielectric loss have still held back the development of miniaturized microelectronic devices. Hence, we reported core@shell structured fillers with a conducting material@insulating material double-shell to improve the dielectric performance of the poly(vinylidene fluoride) (PVDF) composites. The hybrid fillers introducing ultra-short carbon nanotube (SSCNT) as an inner layer between BaTiO3 (BT) as a core and silica (SiO2) as an outer shell were synthesized. As the thickness of the insulating shell is enough thin, the BT@SSCNT@SiO2/PVDF composites exhibit an enhanced dielectric constant and a concurrently suppressed dielectric loss with the decreasing thickness. The composite incorporating the filler with the thinnest SiO2 shell has the highest dielectric constant of 12.27 and the lowest dielectric loss of 0.023 at 20 wt% filler loading where the breakdown strength is about 15 less than the maximum value of 192.5 kV/mm. Furthermore, the hybrid fillers endow the composites with impressively stable dependence on frequency in a wide range of 102∼105 Hz. The achievement can be ascribed to the conducting property of the SSCNT inner layer and the suitable thickness of the insulating outer layer. They can synergetically provide the composites with an optimized polarization effect at a broad frequency resulting from the improved electrical field. This work reveals that a proper structure of the core@conducting material@insulating material core@double-shell filler can be an approach to optimize the overall dielectric performance of the polymer-based composites with high energy storage density.

Tuning the MOF-derived Fe fillers and crystal structure of PVDF composites for enhancement of their energy storage density

High-Energy-Density Ferroelectric Polymer Nanocomposites for Capacitive Energy Storage: Enhanced Breakdown Strength and Improved Discharge Efficiency

Simultaneously improved dielectric constant and breakdown strength of PVDF/Nd-BaTiO3 fiber composite films via the surface modification and subtle filler content modulation

Achieving High Energy Density and Low Loss in PVDF/BST Nanodielectrics with Enhanced Structural Homogeneity

Significantly Improved Energy Storage Performance of PVDF Ferroelectric Films by Blending PMMA and Filling PCBM

Enhanced Energy Storage Performance of Poly(vinylidene Fluoride)-Based Polymer Blends Via Post-Treatments

Ultrahigh polar phase content PVDF-based composite films with ultralow filler loading for high-energy-density flexible capacitors

Two-Dimensional Fillers Induced Superior Electrostatic Energy Storage Performance in Trilayered Architecture Nanocomposites

Simultaneously improved dielectric constant and breakdown strength of PVDF/Nd-BaTiO<sub>3</sub> fiber composite films via the surface modification and subtle filler content modulation

Significantly improved energy storage performance of flexible PVDF-based nanocomposite by loading surface-hydroxylated BaZr0.2Ti0.8O3 nanofibers

Advancing high-temperature electrostatic energy storage via linker engineering of metal–organic frameworks in polymer nanocomposites

Improved capacitive energy storage capability of P(VDF-HFP) nanocomposites enabled by cost-effective and ergodic relaxor phase dominant nanofillers

Structure Design Boosts Concomitant Enhancement of Permittivity, Breakdown Strength, Discharged Energy Density and Efficiency in All‐organic Dielectrics

Improved energy storage performance of sandwich-structured P(VDF-HFP)-based nanocomposites by the addition of inorganic nanoparticles

Simultaneously achieving high discharge energy density and discharge efficiency in P(VDF-CTFE)/PVDF based nanocomposites through topological-structure design and proper doping composition modulation

Enhancing energy storage performance of PVDF-based composites through semiconducting AZO-BT heterostructure

Achieving superior energy density in ferroelectric P(VDF-HFP) through the employment of dopamine-modified MOFs

Enhanced dielectric constant and concurrently suppressed dielectric loss of PVDF composites incorporating BaTiO3@SSCNT@SiO2 core@double-shell structured fillers

Achieve High Dielectric and Energy-Storage Density Properties by Employing Cyanoethyl Cellulose as Fillers in PVDF-Based Polymer Composites

All-Organic Dielectrics with High Breakdown Strength and Energy Storage Density for High-Power Capacitors

Ultrahigh Capacitive Energy Density in Stratified 2D Nanofiller-Based Polymer Dielectric Films