Abstract:ABSTRACTLarge amount of work has been published on the tacticity‐properties relationship of isotactic polypropylene (iPP). However, the stereo‐defect distribution dependence of morphology and mechanical properties of β‐nucleated iPP (β‐iPP) is still not clear. In this study, two different iPP resins (PP‐A and PP‐B) with similar average isotacticity but different uniformities of stereo‐defect distribution were selected, their β‐iPP injection molding specimens were prepared, and the morphology evolution and tensile behaviors were studied by means of differential scanning calorimetry (DSC), 2D wide‐angle X‐ray diffraction (2D‐WAXD) and scanning electron microscope (SEM). DSC results showed that with the same concentration of β‐nucleating agent (0.3 wt % WBG‐II), PP‐B with more uniform stereo‐defect distribution exhibited more amount of β‐phase than that of PP‐A with less uniform stereo‐defect distribution, indicating that PP‐B is more favorable for the formation of β‐phase. SEM results showed that PP‐B formed more amount of β‐crystals with relatively high structural perfection, while in PP‐A a mixed morphology of α‐ and β‐phase with obviously higher amount of structural imperfection emerges. The results of room‐temperature tensile test indicated that the yield peak width of PP‐B was obviously wider, and the elongation at break of PP‐B was higher than that of PP‐A, showing a better ductile of PP‐B. The morphology evolution results of SEM, 2D‐WAXD and DSC suggest that, a combination of lamellar deformation and amorphous deformation occurred in PP‐A, while only amorphous deformation mainly took place in PP‐B, which was thought to be the reason for the different tensile behaviors of the samples. In the production of β‐PP products via injection molding, the uniformity of stereo‐defect distribution was found to be an important factor. PP with more uniform distribution of stereo‐defect favors the formation of large amount of β‐phase with high perfection, which exhibit superior ductile property. The related mechanism was discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014, 131, 40027.

Influence Of Oriented Beta-Lamellae On Deformation And Pore Formation In Beta-Nucleated Polypropylene

Influence of lamellar structure on double yield behavior and pore size distribution in β nucleated polypropylene stretched membranes

Structure Evolution and Properties Enhancement of Polyamide‐6/polyamide‐1010 Films under Uniaxial and Biaxial Stretching

Deformation and Pore Formation Mechanism of Β Nucleated Polypropylene with Different Supermolecular Structures

Pore formation mechanism of beta nucleated polypropylene stretched membranes

Deformation-induced Structure Evolution of Oriented Β-Polypropylene During Uniaxial Stretching

Preparation of Highly Oriented Β Polypropylene and Its Pore Formation Mechanism During Stretching

Pore Formation Mechanism of Oriented Β Polypropylene Cast Films During Stretching and Optimization of Stretching Methods: In-situ SAXS and WAXD Studies

Investigation Of Deformation And Pore Formation In Isotactic Polypropylene Containing Active Nano-Caco3

The Structure Changes of Polypropylene Precursor Film with Different Die Draw Ratio During Annealing

Beta/Alpha Transformation Of Beta-Polypropylene During Tensile Deformation: Effect Of Crystalline Morphology

Impact of Different Die Draw Ratio on Crystalline and Oriented Properties of Polypropylene Cast Films and Annealed Films

Formation Mechanism and Morphology of Β-Transcrystallinity of Polypropylene Induced by Two-Dimensional Layered Interface

Formation of Oriented Β‐transcrystals Induced by Self‐assembly of Nucleating Agent and Its Micropores Formation During Uniaxial Stretching

Nanostructure and Mechanical Measurement of Highly Oriented Lamellae of Melt-Drawn HDPE by Scanning Probe Microscopy

Deformation And Pore Formation Mechanism Under Tensile Loading In Isotactic Polypropylene

Effect of Oscillatory Shear Field on the Morphology and Mechanical Properties of Β-Nucleated Isotactic Polypropylene

Effect of Annealing on the Microvoid Formation and Evolution During Biaxial Stretching of Β Nucleated Isotactic Polypropylene

Investigation on the Morphology and Tensile Behavior of Β‐nucleated Isotactic Polypropylene with Different Stereo‐defect Distribution

Viscous-Force-Dominated Tensile Deformation Behavior of Oriented Polyethylene

Dependence Of Mechanical Properties On Beta-Form Content And Crystalline Morphology For Beta-Nucleated Isotactic Polypropylene