Abstract:In the past a few years, perovskite light-emitting diodes (LEDs) have experienced extremely amazing development. Thanks to the decent optoelectronic properties, perovskite material has made itself a competitive candidate for next-generation displays and lighting. With the great efforts of researchers in this field, the external quantum efficiencies (EQEs) have already surpassed the 20% milestone for both red and green colored perovskite LEDs. Lately, the blue perovskite LEDs have been reported to achieve an EQE higher than 12%. With the fantastic material quality, perovskite material can achieve a super high photoluminescent quantum efficiency (PLQY); therefore, the internal quantum efficiency (QE) for perovskite LEDs can also reach the level of higher than 90%. As a result, the key solution to the further enhancement of the perovskite LEDs performance relies on the light outcoupling for perovskite LEDs. During the past five years, we have devoted ourselves to the development of nanophotonic strategies for the performance enhancement of the perovskite LEDs. The strategies are comprised of two main categories. The first category is using a nanophotonic substrate for perovskite LEDs devices. The structure we designed was a combination of a nanodome coupler with the photonic crystal optical antennas. When the geometry of the structure was delicately optimized, the light supposed to be trapped inside the active layer can be first coupled into the photonic crystals and form guided modes. After that, the photonic crystals, working as optical antennas, can convert the guided modes to the leaky modes and finally the leaky modes can emit to the air. With this strategy, we successfully improved the EQE of the perovskite LEDs from about 8% to 17.5%, which was the record for the MAPbBr3 based perovskite LEDs at that time. The second category of the nanophotonic strategies is making nanostructured active materials instead of using the nanostructured out-coupling substrates. With the exploration of varieties of nanostructures, we finally determined to use the nanowire arrays for the perovskite LEDs study. Intriguingly, we came up with a solution method with the nanoporous template for perovskite nanowires growth. By studying the growth with different template geometries, we found out that the nanowire growth had a strong relationship with the capillary effect. Then we carefully designed the template thickness and the nanowire lengths, and we made the three-dimensional nanowire arrays-based perovskite LEDs. Compared to the planar counterparts, the nanowire-based perovskite LEDs showed an enhanced EQE (from 11% to 16%), which is due to the improved light coupling inside the nanowires (from about 20% to about 45%). More importantly, the operational stability of the nanowire-based perovskite LEDs was also enhanced (T50 increased from 9 min to 35 min). And the long-term stability of the nanowire-based perovskite LEDs was also increased with an enhancement factor of 3 times. It’s also worth noting that, the mechanical robustness of the nanowire-based perovskite LEDs was also enhanced a lot due to the protection by the porous template, and much fewer cracks were created inside nanowires during bendings when compared to the planar counterparts. With the above mentioned two nanophotonic strategies for perovskite LEDs performance (both light-coupling efficiency and stability) enhancement, we demonstrated the advantages of applying nanostructures in perovskite LEDs. By further developing the perovskite material qualities and meanwhile improving the deposition techniques that are more compatible with nanostructures, we believe the EQEs of perovskite LEDs can be further improved to a new milestone soon. Last but not least, the nanophotonic strategies we developed here are not just limited to LEDs; they can be also applied for other device applications such as solar cells, photodetectors, and lasers.

Enhanced Stability and Performance in Perovskite Nanocrystal Light‐Emitting Devices Using a ZnMgO Interfacial Layer

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Perovskite LEDs Performance Enhancement with Nanostructures for Better Light out-Coupling and Stability

Optimizing the Performance of Perovskite Nanocrystal LEDs Utilizing Cobalt Doping on a ZnO Electron Transport Layer

Perovskite-molecule Composite Thin Films for Efficient and Stable Light-Emitting Diodes.

Elevating Charge Transport Layer for Stable Perovskite Light‐Emitting Diodes

Interfacial-engineering enhanced performance and stability of ZnO nanowire-based perovskite solar cells

Mg2+-Assisted Passivation of Defects in CsPbI3 Perovskite Nanocrystals for High-Efficiency Photoluminescence.

The Zn1−xMgxO electron transport layer for charge balance in high-brightness inverted quantum-dot light-emitting diodes

High-Efficiency Light-Emitting Diodes based on Formamidinium lead bromide nanocrystals and solution processed transport layers

Highly Efficient CsPbBr3 Perovskite Nanocrystal Light-Emitting Diodes with Enhanced Stability Via Colloidal Layer-by-Layer Deposition

Layered B2O3/CsPbBr3 perovskite composite embedded using glass as microreactor with enhanced stability and high-efficiency light extraction

Bright CsPbBr3 Perovskite Nanocrystals with Improved Stability by In-Situ Zn-Doping

Research progress of stability of luminous lead halide perovskite nanocrystals

Stability of Perovskite Light‐Emitting Diodes: Existing Issues and Mitigation Strategies Related to both Material and Device Aspects

Fabrication of ZnO Dual Electron Transport Layer Via Atomic Layer Deposition for Highly Stable and Efficient CsPbBr3perovskite Nanocrystals Light-Emitting Diodes.

Lattice Engineering via Transition Metal Ions for Boosting Photoluminescence Quantum Yields of Lead‐Free Layered Double Perovskite Nanocrystals

Zr-metal-organic framework based cross-layer-connection additive for stable halide perovskite solar cells

Aluminum-Doped Zinc Oxide As Highly Stable Electron Collection Layer for Perovskite Solar Cells

Improved Outcoupling Efficiency and Stability of Perovskite Light‐Emitting Diodes using Thin Emitting Layers

Optimizing Emission Stability in Blue Perovskite Light‐Emitting Diodes via Oxygen‐Plasma Treatment of NixOy Hole Transport Layer