Abstract:In this study, both AZ91 alloy and nano-SiCp/AZ91 composite were subjected to multi-pass forging under varying passes and temperatures. The microstructure and mechanical properties of the alloy were compared with its composite. After six passes of multi-pass forging at a constant temperature of 400 ℃, complete recrystallization occurred in both the AZ91 alloy and composite. The decrease of temperature and the increase of passes for the multi-pass forging led to further refinement of dynamic recrystallized grains and dynamic precipitation of second phases. The grain size of the nano-SiCp/AZ91 composite was smaller than that of the AZ91 alloy under the same multi-pass forging condition, which indicated that the addition of SiC nanoparticles were beneficial to grain refinement by pinning the grain boundaries. The texture intensity for the 12 passes of multi-pass forging with varying temperatures was increased compared with that after nine passes. The ultimate tensile strength is slightly decreased while the yield strength was increased unobviously for the AZ91 alloy with the decrease of temperature and the increase of the passes for the multi-pass forging. Under the same condition of multi-pass forging, the yield strength of the composite was higher than that of the AZ91 alloy due to the Orowan strengthening effect and grain refinement strengthening resulting from externally applied SiC nanoparticles and internally precipitated second phases. By comparing the microstructure and mechanical properties between the AZ91 alloy and nano-SiCp/AZ91 composite, the strength-toughness properties of the composites at room temperature were affected by the matrix grain size, texture evolution, SiC nanoparticles distribution and the precipitated second phases.

Improved Microstructure and Mechanical Properties of AZ31–Mg2Si in Situ Composite Fabricated by Cyclic Closed-die Forging

Enhanced Microstructure Homogeneity and Mechanical Properties of AZ31–Si Composite by Cyclic Closed-Die Forging

Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Processed by Cyclic Closed-Die Forging

Microstructure and Mechanical Properties of AZ31–Mg2Si in Situ Composite Fabricated by Repetitive Upsetting

Enhanced Microstructure Homogeneity and Mechanical Properties of AZ91–SiC Nanocomposites by Cyclic Closed-Die Forging

Microstructure and mechanical performance of AZ31-1.7 wt.% Si alloy processed by cyclic channel die compression

Effects of Cyclic Closed-Die Forging on the Microstructural Evolution and Mechanical Properties of SiC/AZ91D Nanocomposites

Study on the Microstructure and Properties of AZ31 Alloy by Hot Die Forging Extrusion

Isothermal Forging of AZ91 Reinforced with 10vol.% Silicon Carbon Particles

Microstructure Evolution and Mechanical Properties of Sic Nanoparticles Reinforced Magnesium Matrix Composite Processed by Cyclic Closed-Die Forging

Microstructures and Mechanical Properties of Sicp/Az91 Magnesium Matrix Nanocomposites Processed by Multidirectional Forging

Microstructures and mechanical properties of AZ61 magnesium alloy after isothermal multidirectional forging with increasing strain rate

Microstructure and Mechanical Properties of Sicp/Az91 Composite Deformed Through A Combination of Forging and Extrusion Process

Effects of optimizing continuous forging extrusion process on the microstructure and mechanical properties of AZ31 magnesium alloy

Microstructure and Mechanical Properties of Mg 2 Si/AZ91 Composites In Situ Synthesized by Using Silica Fume as the Si Source

Microstructure and Properties of AZ91D Magnesium Alloy in Combination Process of Die Casting with Forging

Microstructure and Tensile Properties of SiC Nanoparticles Reinforced Magnesium Matrix Composite Prepared by Multidirectional Forging under Decreasing Temperature Conditions

Deformation Behavior and Microstructure Evolution of AZ31 Mg Alloy by Forging–Bending Repeated Deformation with Multi-pass Lowered Temperature

Microstructure and Tensile Properties of AZ31B Alloy and AZ31B-SiCp Deformed Through a Multi-step Process

The Comparison in the Microstructure and Mechanical Properties Between AZ91 Alloy and Nano-SiCp/AZ91 Composite Processed by Multi-Pass Forging under Varying Passes and Temperatures

Microstructures and Mechanical Properties of Az91 Magnesium Alloy Processed by Multidirectional Forging under Decreasing Temperature Conditions