Abstract:Fe-Co-Ni coating, a vital type of transition metal alloy, shows great potential in the field of hydrogen storage and magnetic materials. In this study, Fe-Co-Ni coatings were prepared on Cu substrates from a deep eutectic solution of choline chloride/2Urea (ChCl/2Urea) DES by electrodeposition. The effects of deposition potential on the morphology, chemical composition, crystal structure, corrosion resistance and magnetic properties of nanostructured Fe-Co-Ni coatings were investigated. The results revealed that the reduction process of Fe-Co-Ni alloy on the Cu electrode in ChCl/2Urea DES was irreversible three-dimensional instantaneous nucleation, which was controlled by diffusion. The surface morphology, microstructure, compose and crystallite size of the Fe-Ni-Co alloy were related to the deposition potential. The Fe content of the electrodeposited alloys showed a maximum of 48.17 at% at the applied potential of −1.3 V and a positive correlation was observed between the Fe content and electrodeposition potential in the investigated potential range. The nickel-rich coatings were obtained at high potential and iron-rich coatings were obtained at low potential. The less roughness, more compact grain and uniform flat Fe-Co-Ni coatings were prepared under a more negative potential. The Fe-Co-Ni coatings were composed of face-centered cube (fcc, NiFe) and body-centered cube crystals (bcc, FeCo). With the negative shift of deposition potential, the structure of Fe-Co-Ni coatings grew preferentially toward FeCo(110) and FeCo(211) crystal surfaces. The Fe-Co-Ni coatings prepared from ChCl/2Urea DES at different deposition potentials showed good corrosion resistance. Fe-Co-Ni coating that is produced at the deposition potential of −1.2 V, exhibited a more positive corrosion potential and obvious magnetic anisotropy.

Electrochemically Fabricated Fe–Ni Alloy Nanowires and Their Structural Characterization

The influence of electrodeposition potential on the chemical composition, structure and magnetic properties of FeCoNi nanowires

Electrochemical fabrication and structure of Ni<sub><i>x</i></sub>Zn<sub>1−<i>x</i></sub> alloy nanowires

Fabrication of Al-Ni nanofibers by selective etching

Structural, magnetic, and magnetoresistive properties of electrodeposited Ni5Zn21 alloy nanowires.

Structural Study on Ni Nanowires in an Anodic Alumina Membrane by Using in Situ Heating Extended X-Ray Absorption Fine Structure and X-Ray Diffraction Techniques

Electrochemical Fabrication And Structure Of Nixzn1-X Alloy Nanowires

Structural, Magnetic, and Magnetoresistive Properties of Electrodeposited Ni<sub>5</sub>Zn<sub>21</sub>Alloy Nanowires

Structure and magnetic property of Ni-Cu alloy nanowires electrodeposited into the pores of anodic alumina membranes

Electrodeposited NiFeCoMoW High-Entropy Alloys with Nanoscale Amorphous Structure As Effective Hydrogen Evolution Electrocatalysts

Electrodeposition of Complex High Entropy Oxides via Water Droplet Formation and Conversion to Crystalline Alloy Nanoparticles

Evaluation of corrosion resistance of electrodeposited nanocrystalline Ni–Fe alloy coatings

Fabrication and magnetic properties of Fe14Ni86 alloy nanowire array

Electrodeposition and characterization of nanocrystalline CoNiFe films

Electrochemical Behavior of Nanostructured Fe-Pd Alloy During Electrodeposition on Different Substrates

Anodic Fabrication of Ti-Ni-Si-O Nanostructures on Ti10Ni5Si Alloy

Structural characterization and magnetic behavior of Ni2FeGa alloy nanowires fabricated by pulsed electrodeposition

Interface catalytic reduction of alumina by nickle for the aluminum nanowire growth: Dynamics observed by in situ TEM

Study on Magnetic Property of Fe14ni86 Alloy Nanowire Array

Preparation of Pt/Ni Multilayer Nanowires with Enhanced Magnetic Property and Electrocatalytic Activity

Electrochemical behavior and electrodeposition of Fe-Co-Ni thin films in choline chloride/urea deep eutectic solvent