Abstract:To investigate structural changes, the Cu95Fe5 alloy system was subjected to cooling rates of 1 × 1013 K/s, 2 × 1012 K/s, 2 × 1011 K/s, and 2 × 1010 K/s using the molecular dynamics simulation method. The results revealed that decreasing the cooling rate caused an increase in the phase transition temperature. Further, the structure of the alloy system exhibited a tendency towards increased stability following cooling at lower cooling rates. The Fe precipitation behavior of the Cu95Fe5 alloys during cooling at the rate of 2 × 1010 K/s was further explored, with the results suggesting that the formation and growth of the Fe cluster is a continuous process governed by the nucleation and growth mechanism. The size and number of Fe clusters formed at different stages were found to be affected by three factors, namely, the interaction force between the Fe atoms, the diffusion ability of the Fe atoms, and the interfacial energy between the Fe cluster and Cu matrix. When the alloy temperature exceeded 1400 K, the accumulation of the Fe atoms was facilitated by their strong interaction. However, the high temperatures and the large diffusion coefficient of the Fe atoms acted as inhibitors to the growth of Fe clusters, despite the intense thermal activities. As the temperature was reduced from 1400 K to 1050 K, the Fe atoms moved with a reduced intensity in a narrower area, and both the number of Fe atoms in the largest cluster and the number of clusters increased due to the action of the interaction force between the Fe atoms. Upon lowering the temperature from 1050 K to 887 K, the size of the largest Fe cluster increased rapidly, while the number of clusters decreased gradually. The growth of the largest Fe cluster could be partly attributed to the diffusion of single Fe atoms into the cluster under the action of the interaction force between the Fe atoms, in addition to the gathering and combination of multiple clusters. When the temperature was lowered from 967 K to 887 K, the diffusion coefficient of the Fe atoms approached 0, indicating that the non-diffusive local structure rearrangements of atoms dominated in the system structure change process. The interface energy governed the combination of the Fe clusters in this stage. At a temperature below 887 K, the alloy crystallized, the activities of the Fe atoms were reduced due to a low temperature, and the movement range of the Fe atoms was small at a fast cooling rate. As such, both the size and number of Fe clusters showed no obvious changes.

Precipitation Kinetics in Binary Fe–Cu and Ternary Fe–Cu–Ni Alloys Via Kmc Method

Effect of Ni on Cu precipitation kinetics in α-Fe by AKMC study

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Numerical Simulation of Copper Precipitation During Aging in Deformed Fe-Cu Alloys

Studies of concentration and temperature dependencies of precipitation kinetics in iron-copper alloys using kinetic monte carlo and stochastic statistical simulations

Effect of Cu on Nanoscale Precipitation Evolution and Mechanical Properties of a Fe-NiAl Alloy.

Modeling of the Precipitation Kinetics During Aging a Predeformed Fe-Cu Alloy

Simulation Of Competitive Cu Precipitation In Steel During Non-Isothermal Aging

Phase field study of effect of Al on Cu-rich precipitates in Fe-Cu-Mn-Al alloys

Kinetics of aging precipitation of CuCr alloy by rapidly solidification

Diffusion kinetics for fcc quinary Cu–Co–Mn–Ni–Si system and its application to precipitation simulations

Coarse-Grained Mass Density Field Description Coupled with Kinetic Monte-Carlo Simulation for Understanding the Cr-rich Phase Precipitation Kinetics and Microstructure Evolution in Fe-Cr Binary Alloys

Phase-field modeling of microstructure evolution of Cu-rich phase in Fe–Cu–Mn–Ni–Al quinary system coupled with thermodynamic databases

Study of the influence of alloying elements on Cu precipitation in steel by non-classical nucleation theory

Atomic-scale computer simulation of mixture precipitation mechanism for Ni75AlxV25-x alloy

Atomic Scale Insights into the Rapid Crystallization and Precipitation Behaviors in FeCu Binary Alloys

Molecular Dynamics Simulation Research on Fe Atom Precipitation Behaviour of Cu-Fe Alloys during the Rapid Solidification Processes

Molecular Dynamics Research on Fe Precipitation Behavior of Cu95Fe5 Alloys during Rapid Cooling

COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_<75>Al_<2.5>V_<22.5> ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD

Monte-Carlo Simulation of Mass Density Field Coupled Dynamics for Microstructural Evolution of Fe-Cr Binary Alloys