Abstract:The ways to overcome surface charge recombination and poor interface contact are still the central challenges for the development of inorganic–organic hybrid halide perovskite solar cells (PSCs). [6,6]-Phenyl C61 butyric acid methyl ester (PCBM) is commonly employed in PSCs, but it has some disadvantages including high charge recombination and poor surface coverage. Therefore, the addition of an interfacial engineering layer showing efficient surface passivation, electron extraction, and excellent interface contact can solve the above problems. Furthermore, by employing interface engineering with a spike structure of the energy levels, the reduced energy losses are beneficial to elevating the open-circuit voltage (Voc) in PSCs. Herein, the linear naphthalene imide dimer containing an indacenodithiophene unit (IDTT2NPI) has been developed as an excellent interface engineering material to strengthen the perovskite performance. The introduction of a spike interface on the top of a methylammonium lead triiodide (MAPbI3) film resulted in a high Voc of 1.12 V with the optimal efficiency reaching 20.2%. The efficiency enhancement can be traced to the efficient surface passivation and enhanced interface contact. The mechanism of IDTT2NPI as the interface engineering layer was investigated by both experiments and theoretical calculations. This work provides a promising naphthalene imide-based interfacial material for high-efficiency and stable PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11620?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11620</a>.Materials and characterization, device fabrication and characterization, synthesis of IDTT2NPI, calculation methods, and supporting tables and figures (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11620/suppl_file/am0c11620_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dimensional Engineering of a Graded 3D–2D Halide Perovskite Interface Enables Ultrahigh Voc Enhanced Stability in the P‐i‐n Photovoltaics

Interface Engineering for Highly Efficient and Stable Planar P‐i‐n Perovskite Solar Cells

Leveraging Dion–Jacobson Interface Hierarchies for Defect Alleviation in High-Efficiency and Durable Perovskite Solar Cells

Simultaneous Passivation of Bulk and Interface Defects with Gradient 2D/3D Heterojunction Engineering for Efficient and Stable Perovskite Solar Cells.

Improved Performance and Stability of Perovskite Solar Modules by Regulating Interfacial Ion Diffusion with Nonionic Cross‐Linked 1D Lead‐Iodide

Surface Planarization‐Epitaxial Growth Enables Uniform 2D/3D Heterojunctions for Efficient and Stable Perovskite Solar Modules

Graded Bandgap Perovskite with Intrinsic n–p Homojunction Expands Photon Harvesting Range and Enables All Transport Layer‐Free Perovskite Solar Cells

Long-chain organic molecules enable mixed dimensional perovskite photovoltaics: a brief view

Heterojunction formed via 3D-to-2D perovskite conversion for photostable wide-bandgap perovskite solar cells

Efficient Naphthalene Imide-Based Interface Engineering Materials for Enhancing Perovskite Photovoltaic Performance and Stability

A 2D/3D heterojunction engineering for carbon-based hole-transport-layer-free perovskite solar cells

Passivating Dipole Layer Bridged 3D/2D Perovskite Heterojunction for Highly Efficient and Stable p‐i‐n Solar Cells

Charge extraction via graded doping of hole transport layers gives highly luminescent and stable metal halide perovskite devices

Lattice Matching Propels Customized-Dimensionality 2D/3D Perovskite Heterojunctions for High-Performance Photovoltaics

Stable and Efficient 3D-2D Perovskite-Perovskite Planar Heterojunction Solar Cell without Organic Hole Transport Layer

Two birds with one stone: Simultaneous realization of constructed 3D/2D heterojunction and p-doping of hole transport layer for highly efficient and stable perovskite solar cells

Efficient and Stable Perovskite Solar Cell with High Open-Circuit Voltage by Dimensional Interface Modification

Enhanced Efficiency and Stability of Perovskite Solar Cells by 2D Perovskite Vapor-Assisted Interface Optimization

Suppressing halide phase segregation in wide-bandgap perovskite film by co-doping strategy for high-performance and stable perovskite solar cells

Mixed Dimensionality of 2D/3D Heterojunctions for Improving Charge Transport and Long-Term Stability in High-Efficiency 1.63 Ev Bandgap Perovskite Solar Cells

Air-processed 2D/3D perovskite solar cell achieve high-efficient and stable performance via graded interface engineering