Abstract:Interface engineering has been recognized as a very effective method to simultaneously improve both efficiency and stability in perovskite solar cells (PSCs). In this work, we report using an excellent small molecular material tetraphenyldibenzoperiflanthene (DBP) to modify the perovskite/Spiro-OMeTAD interface to achieve significantly improved solar cell performance. It is found that the ultrathin DBP interlayer accelerates hole transfer across the FAxMA1–xPbInBr3–n/Spiro-OMeTAD interface and effectively reduces the nonradiative recombination. The Kelvin probe force microscopy and energy band analyses reveal that the DBP modification helps build better matched energy level alignment and smaller energy loss for more fluent hole transport. Consequently, the DBP-treated PSCs achieve an enhanced open-circuit voltage as high as 1.184 V and fill factor as high as 78.2% as well as the negligible hysteresis. The champion PSC made with DBP gives a PCE of 21.49%, significantly increased compared to 19.68% from the reference cell without the modification. Moreover, DBP also serves as a water-resistant protection for improved moisture stability. The PCE of the DBP-treated cells without encapsulation remains more than 84% of its initial efficiency, which is significantly higher than that of the reference PSCs (65%) after 20 days of storage under an air environment with 50–65% humidity. This study provides an effective interface modification material to address notorious stability problems in Spiro-OMeTAD-based PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12544?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12544</a>.SEM images of the perovskite film treated by different concentrations of DBP; UV–vis spectra of the pristine and DBP-treated perovskite films; XRD patterns of the pristine and DBP-treated perovskite films; time-resolved PL spectra of different kinds of the perovskite films; and further information on device performance, J–V hysteresis, and stability (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12544/suppl_file/am0c12544_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient Naphthalene Imide-Based Interface Engineering Materials for Enhancing Perovskite Photovoltaic Performance and Stability

Thiophene Terminated Fullerene Derivatives for Interfacial Modification toward High Efficiency MAPbI 3 Perovskite Solar Cells

Gaining Insight Into The Effect Of Organic Interface Layer On Suppressing Ion Migration Induced Interfacial Degradation In Perovskite Solar Cells

An efficient and thickness insensitive cathode interface material for high performance inverted perovskite solar cells with 17.27% efficiency

Development of Pyr‐TPA as Interfacial Passivation Layer Enables Efficient and Stable n‐i‐p Perovskite Solar Cells

One-step synthesis of low-cost perylenediimide-based cathode interfacial materials for efficient inverted perovskite solar cells

Intermediate-Controlled Interfacial Engineering for Stable and Highly Efficient Carbon-Based PSCs

Interfacial Passivation Engineering for Highly Efficient Perovskite Solar Cells with a Fill Factor over 83

Enhancing perovskite solar cell performance: The role of polymer-assisted hole transport layers in hot carrier dynamics

Enhancing Hole Transport Uniformity for Efficient Inverted Perovskite Solar Cells Through Optimizing Buried Interface Contacts and Suppressing Interface Recombination.

Multifunctional Hybrid Interfacial Layers for High‐Performance Inverted Perovskite Solar Cells

Improved Efficiency and Stability in 1,5-Diaminonaphthalene Iodide-Passivated 2D/3D Perovskite Solar Cells

I/P Interface Modification for Stable and Efficient Perovskite Solar Cells

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Improving Photovoltaic Stability and Performance of Perovskite Solar Cells by Molecular Interface Engineering

Understanding The Heterointerfaces in Perovskite Solar Cells via Hole Selective Layer Surface Functionalization

Molecular Regulation of Perylenediimide and Fluorene‐Based Cathode Interfacial Materials for Efficient Inverted Perovskite Solar Cells

Interface Engineering of Perovskite Solar Cells with Multifunctional Polymer Interlayer Toward Improved Performance and Stability

Simultaneous Interface Amelioration and Energy Level Modulation Using In Situ Polymerized Molecules for Efficient and Stable Perovskite Solar Cells

An Interface Co-modification Strategy for Improving the Efficiency and Stability of CsPbI 3 Perovskite Solar Cells

Interfacial and Permeating Modification Effect of n-type Non-fullerene Acceptors toward High-Performance Perovskite Solar Cells