Abstract:The increasing demand for portable and wearable electronics requires high reliability of devices for continuous miniaturization, and provides challenges for the dimensionally-confined bottom-up assembly methods which typically begin with materials such as graphene oxide (GO). However, GO based devices suffer from complicated synthesis procedures and lower device performance due to the presence of oxygen functionalities on the electrode materials, as well as the need to ensure a good interface between the electrode material and the electrolyte used. Here, a facile, two-step, top-down strategy was used to fabricate thin, all-in-one (PVA/H3PO4)/graphene/graphite paper-like electrodes. The assembled flexible, all-solid-state micro-supercapacitor devices exhibit excellent performance compared to previously reported values, such as a high volumetric capacitance of similar to 3.6F.cm(-3) even after 20000 cycles. Notably, the devices also showed excellent rate performance with extremely high specific capacitance retention of up to 94% as the current density increased from 0.5 to 5 A.cm(-3), indicating promise for high power applications. The paper-like electrodes were tailored to less than 0.5 mm width for further miniaturization and suffered from minimal capacitance attenuation. The excellent mechanical flexibility, capacity, and reliability indicate their promising application in energy storage devices. (C) The Author(s) 2018. Published by ECS.

Supercapacitors: A Three‐Layer All‐In‐One Flexible Graphene Film Used as an Integrated Supercapacitor (Adv. Mater. Interfaces 11/2017)

A Three-Layer All-In-One Flexible Graphene Film Used As an Integrated Supercapacitor

Hierarchical 3D All-Carbon Composite Structure Modified with N-Doped Graphene Quantum Dots for High-Performance Flexible Supercapacitors

Graphene Thin Films by Noncovalent-Interaction-Driven Assembly of Graphene Monolayers for Flexible Supercapacitors

High-Strength Graphene Composite Films by Molecular Level Couplings for Flexible Supercapacitors with High Volumetric Capacitance

Flexible and Integrated Supercapacitor with Tunable Energy Storage.

Flexible Reduced Graphene Oxide/polypyrrole Films for Supercapacitors

All-in-one Graphene Fiber Supercapacitor.

Direct synthesis of graphene-based hybrid films as flexible supercapacitor electrodes

In-situ Chemical Reduction Produced Graphene Paper for Flexible Supercapacitors with Impressive Capacitive Performance

Supercapacitors Based on Flexible Graphene/polyaniline Nanofiber Composite Films.

A facile approach to fabricate flexible all-solid-state supercapacitors based on MnFe2O4/graphene hybrids

Methylene blue modified graphene film as high-performance electrode towards all-in-one flexible supercapacitors with “all-graphene” structure

Layer-By-Layer Engineered Co-Al Hydroxide Nanosheets/Graphene Multilayer Films As Flexible Electrode for Supercapacitor

Freestanding Nitrogen-Doped D-Ti3c2/reduced Graphene Oxide Hybrid Films for High Performance Supercapacitors

Fabrication of a Graphene-Based Paper-Like Electrode for Flexible Solid-State Supercapacitor Devices

Three-Dimensional Graphene-Based Composite Hydrogel Materials for Flexible Supercapacitor Electrodes

Graphene/carbon black hybrid film for flexible and high rate performance supercapacitor

Free-standing Reduced Graphene Oxide/MoO3-x Composite Film with High Performance for Flexible Supercapacitors

Facilitated charge transport in ternary interconnected electrodes for flexible supercapacitors with excellent power characteristics.

High Performance All-Carbon Thin Film Supercapacitors