Abstract:Objective. The purpose of this study was to assess a method of accelerating Monte Carlo simulations for modeling depth dose distributions from megavoltage x-ray beams by fitting them to an empirically-derived function.Approach. Using Geant4, multiple simulations of a typical medical linear accelerator beam in water and in water with an air cavity were conducted with varying numbers of initial electrons. The resulting percent depth dose curves were compared to published data from actual linear accelerator measurements. Two methods were employed to reduce computation time for this modeling process. First, an empirical function derived from measurements at a particular linear accelerator energy, source-to-surface distance, and field size was used to directly fit the simulated data. Second, a linear regression was performed to predict the empirical function's parameters for simulations with more initial electrons.Main results. Fitting simulated depth dose curves with the empirical function yielded significant improvements in either accuracy or computation time, corresponding to the two methods described. When compared to published measurements, the maximum error for the largest simulation was 5.58%, which was reduced to 2.01% with the best fit of the function. Fitting the empirical function around the air cavity heterogeneity resulted in errors less than 2.5% at the interfaces. The linear regression prediction modestly improved the same simulation with a maximum error of 4.22%, while reducing the required computation time from 66.53 h to 43.75 h.Significance. This study demonstrates the effective use of empirical functions to expedite Monte Carlo simulations for a range of applications from radiation protection to food sterilization. These results are particularly impactful in radiation therapy treatment planning, where time and accuracy are especially valuable. Employing these methods may improve patient outcomes by ensuring that dose delivery more accurately matches the prescription or by shortening the preparation time before treatment in Monte Carlo-based treatment planning systems.

Effect of Medium Size on Theγ-Ray Buildup Factor for Energy Absorption in Water

Research on gamma ray buildup factor for energy absorption based on MCNP

Monte Carlo Simulation of Cherenkov Light Spot Produced by Underwater Radioactive Source

Gamma Ray Absorption of Cylindrical Fissile Material with Dual Shields

Fitting Monte Carlo simulation results with an empirical model of megavoltage x-ray beams for rapid depth dose calculations in water

Simulation of γ-Ray Radiation Shielding Utilizing Gd2O3/Bi2O3/Epoxy Resin

Computation of gamma-ray buildup factors for (25-x)CaF2-xAl2O3–15Bi2O3–59B2O3–CuO glasses

Measurement of the high energy $γ$-rays from heavy ion reactions using Čerenkov detector

Effect of Scale on the Modeling of Radiation Heat Transfer in Packed Pebble Beds

Numeric Simulation of System Sensitivity of Γ-Ray Density Meter

Calculation and Verification of Multi-Mev Photon Scattering Coefficient

Effects of incoming particle energy and cluster size on the G-value of hydrated electrons

3-D Gamma Dose Rate Reconstruction for a Radioactive Waste Processing Facility Using Sparse and Arbitrarily-Positioned Measurements

Effects of WO 3 Particle Size in WO 3 /Epoxy Resin Radiation Shielding Material

Significant Improvement of Half-Life Calculation of Α Decays by Considering the Nuclear Medium Effect

Calculation of Self-Absorption and Coincidence Summing Correction Factors for the Extended Sources Using GEANT4

Simulation Study of Energy Absorption of X- and $\Gamma$-Rays in Plastic Scintillating Fiber Arrays

Improved Collision Probability Analysis of the Double-Heterogeneity Problem Based on Matrix Chord Length Correction

Monte Carlo Simulation of Transfer Coefficient of Γ-Ray Density Meter

Effects of Radiation on Large-Scale Spherical Flame Propagation

Effect of Photons and Electrons on the Over-Response of Optical Fiber X-ray Sensors