Abstract:Purpose This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S 11 /S 22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S 12 /S 21 : 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

Simple, Compact and Broadband Right-Angle Transition Between Substrate Integrated Waveguide and Rectangular Waveguide at Ka-Band

Full Ka-Band Right-Angle Transition from Substrate Integrated Waveguide to Air-Filled Rectangular Waveguide

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide

Full Ka Band Waveguide-to-Microstrip Inline Transition Design

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Low loss and broadband transition between substrate integrated waveguide and rectangular waveguide

Compact W-band Antipodal Fin-Line Transition from SIW to Rectangular Waveguide

A Broadband Low-Loss SICL to Ridge Waveguide Transition for Millimeter-Wave Applications

Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications

A full Ka-band microstrip-to-waveguide transition using side-inserted magnetic coupling semicircular ring

A Ka Band Microstrip To Waveguide Transition Using A Quasi-Triangle Probe

Broadband Stripline to Rectangular Waveguide Transition

Ku‐band Substrate Integrated Waveguide Transitions Between Layers

Ka-band Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

A D-Band GCPW to SIW to Air-Filled RWG Cavity-Backed Transition for Integration of Communication System

Low-Loss Perpendicular Transition Between Rectangular Dielectric Waveguide and Microstrip Line at $W$ -Band

Robust Microstrip to Empty Substrate-Integrated Waveguide Transition Using Tapered Artificial Dielectric Slab Matrix

Compact Rectangular Waveguide to Hmsiw Transition

A Full Ka-Band Microstrip-to-waveguide Transition Using Tapered CPS Probe and V-antenna