Mechanical and Dielectric Properties of Crystalline Poly(arylene Ether Nitrile) Copolymers
Yajie Wang,Yong You,Ling Tu,Weibin Hu,Lifen Tong,Renbo Wei,Xiaobo Liu
DOI: https://doi.org/10.1177/0954008318766217
IF: 1.73
2018-01-01
High Performance Polymers
Abstract:Poly(arylene ether nitrile) (PEN) copolymers (HQ/RS-PEN) containing different proportions of hydroquinone (HQ-PEN) block and resorcinol (RS-PEN) block were synthesized, and their crystalline, mechanical, and dielectric properties were investigated. Three HQ/RS-PEN copolymers with 10%, 20%, and 30% of RS-PEN blocks were prepared via condensation polymerization of HQ and RS with 2,6-dichlorobenzonitrile. The PEN copolymers were characterized and confirmed by Fourier transform infrared spectroscopy, intrinsic viscosity, and thermal analyses. With the addition of RS-PEN block, the flexibility of PEN copolymers was increased. In addition, even though the high loading content of RS-PEN block was incorporated, the PEN copolymers still exhibited relatively high dielectric constant, whereas the dielectric loss decreased. Furthermore, to investigate the effect of treatment time and temperature on the physical properties of crystalline PEN copolymers, HQ/RS-PEN20 was isothermally treated at different temperatures (280°C, 300°C, 310°C, 320°C, and 330°C) for a constant time and at a constant time for different hours (1, 2, 3, 4, and 5 h). After the optimization of the crystallization of HQ/RS-PEN polymer, excellent mechanical and dielectric properties of copolymers were obtained. The results showed that when isothermally treated at 320°C for 2 h, the HQ/RS-PEN20 showed optimal properties of tensile strength of 117.6 MPa and dielectric constant of 4.07 at 1 kHz.