Abstract:Lithium–sulfur batteries have attracted significant attention recently due to their high theoretical capacity, energy density and cost effectiveness. However, sulfur cathodes suffer from issues such as shuttle effects, uncontrollable deposition of lithium sulfides species, and volume expansion of sulfur, which result in rapid capacity fading and low Coulombic efficiency. In recent years, metal-oxide nanostructures have been widely used in Li–S batteries, owing to their effective inhibition of the shuttle effect and controlled deposition of lithium sulfide. However, the nonconductive metal-oxides used in Li–S batteries suffer from extra diffusion process, which slows down the electrochemical reaction kinetics. Herein, we report the synthesis of carbon nanoflakes decorated with conductive aluminium-doped zinc oxide (AZO@C) nanoparticles, through a facile biotemplating method using kapok fibers as both the template and carbon source. A sulfur cathode based on the AZO@C nanocomposites shows better electrochemical performance than those of cathodes based on ZnO and Al2O3 with poor conductivity, with a stable capacity of 927 mAh·g−1 at 0.1C (1C = 1,675 mA·g−1) after 100 cycles. A reversible capacity of 544 mAh·g−1 after 300 cycles was obtained even after increasing the current density to 0.5C, with a 0.039% capacity decay per cycle under a sulfur loading of 3.3 mg·cm−2. Moreover, a capacity of 466 mAh·g−1 after 100 cycles at 0.5C could still be obtained when the sulfur loading was increased to 6.96 mg·cm−2. The excellent electrochemical performance of the AZO@C/S composite can be attributed to its high conductivity of the polar AZO host, which suppresses the shuttle effect while simultaneously improving the redox kinetics in the reciprocal transformation of lithium sulfide species.

Enhanced Sulfide Chemisorption Using Boron and Oxygen Dually Doped Multi-Walled Carbon Nanotubes for Advanced Lithium–sulfur Batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Multifunctional Co3s4@Sulfur Nanotubes for Enhanced Lithium-Sulfur Battery Performance

Oxygen-defective MnO2 Decorated Carbon Nanotube As an Effective Sulfur Host for High Performance Lithium Sulfur Battery

Hollow nitrogen-doped carbon/sulfur@MnO2 nanocomposite with structural and chemical dual-encapsulation for lithium-sulfur battery

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Single-atomic Co-B2N2 sites anchored on carbon nanotube arrays promote lithium polysulfide conversion in lithium-sulfur batteries

The dual-play of carbon nanotube embedded with CoNi N codoped porous polyhedra toward superior Lithium–Sulfur batteries

Enhanced Performance of Li-S Batteries due to Synergistic Adsorption and Catalysis Activity within a Separation Coating Made of Hybridized BNNSs/N-Doping Porous Carbon Fibers

Strong Sulfur Binding with Conducting Magnéli-phase Ti(n)O2(n-1) Nanomaterials for Improving Lithium-Sulfur Batteries.

B,N Codoped Graphitic Nanotubes Loaded with Co Nanoparticles As Superior Sulfur Host for Advanced Li-S Batteries.

Enhanced sulfide chemisorption by conductive Al-doped ZnO decorated carbon nanoflakes for advanced Li–S batteries

Sub-nanometric Manganous Oxide Clusters in Nitrogen Doped Mesoporous Carbon Nanosheets for High-Performance Lithium–Sulfur Batteries

Boosted Polysulfide Conversion by Co, Mn Bimetallic-Modulated Nitrogen–Carbon Material for Advanced Lithium–Sulfur Batteries

Dual-Functional Multichannel Carbon Framework Embedded with CoS2 Nanoparticles: Promoting the Phase Transformation for High-Loading Li-S Batteries

Molybdenum carbide nanoparticles encapsulated in N-doped carbon nanotubes as a sulfur host for advanced Li-S battery

Oxygen-Defect-Rich B-ZnCo 2 O 4-x Nanocatalyst for Efficient Conversion Kinetics of Lithium–Sulfur Batteries

Atomically Dispersed Co/Mn Immobilized on O, N Dual Doped Hollow Carbon Spheres As Sulfur Host for Lithium Sulfur Batteries

Nitrogen-doped cross-linked carbon nanosheets-loaded CdB 2 O 4 nanoparticles as efficient sulfur host for lithium–sulfur battery

Rational Fabrication of Nitrogen and Sulfur Codoped Carbon Nanotubes/MoS2 for High-Performance Lithium-Sulfur Batteries

Manganese Oxide Nanosheets with Mixed Valence States as a Separator Coating for Lithium–Sulfur Batteries