Abstract:Capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C 4 D) has the advantages of high throughput (simultaneous detection of multiple ions), high separation efficiency (higher than 10 5 theoretical plates) and rapid analysis capability (less than 5 min for common inorganic ions). A compact CE-C 4 D system is ideal for water quality control and on-site analysis. It is suitable not only for common cations ( e.g. Na + , K + , Li + , NH 4 + , Ca 2+ , etc .) and anions ( e.g. Cl − , SO 4 2− , BrO 3 − , etc .) but also for some ions ( e.g. lanthanide ions, Pb 2+ , Cd 2+ , etc .) that require complex derivatization procedures to be detected by ion chromatography (IC). However, an obvious limitation of the CE-C 4 D method is that its sensitivity ( e.g. 0.3–1 μM for common inorganic ions) is often insufficient for trace analysis ( e.g. 1 ppb or 20 nM level for common inorganic ions) without preconcentration. For this technology to become a powerful and routine analytical technique, the system should be made compact while maintaining trace analysis sensitivity. In this study, we developed an all-in-one version of the CE-C 4 D instrument with custom-made modular components to make it a convenient, compact and high-performance system. The system was designed using direct digital synthesis (DDS) technology to generate programmable sinusoidal waveforms with any frequency for excitation, a kilovolt high-voltage power supply for capillary electrophoresis separation, and an "effective" differential C 4 D cell with a low-noise circuitry for high-sensitivity detection. We characterized the system with different concentrations of Cs + , and even a low concentration of 20 nM was detectable without preconcentration. Moreover, the optimized CE-C 4 D setup was applied to analyse mixed ions at a trace concentration of 200 nM with excellent signal-to-noise ratios. In typical applications, the limits of detection based on the 3 σ criterion (without baseline filtering) were 9, 10, 24, 5, and 12 nM for K + , Cs + , Li + , Ca 2+ , and Mg 2+ , respectively, and about 7, 6, 6 and 6 nM for Br − , ClO 4 − , BrO 3 − and SO 4 2− , respectively. Finally, the setup was also applied for the analysis of all 14 lanthanide ions and rare-earth minerals, and it showed an improvement in sensitivity by more than 25 times.

Combining Field-Amplified Sample Stacking with Moving Reaction Boundary Electrophoresis on A Paper Chip for the Preconcentration and Separation of Metal Ions

Improving Sensitivity for Microchip Electrophoresis Interfaced with Inductively Coupled Plasma Mass Spectrometry Using Parallel Multichannel Separation

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Combining Localized Surface Plasmon Resonance with Anodic Stripping Voltammetry for Heavy Metal Ion Detection

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

Coupling Electrophoretic Separation With Inductively Coupled Plasma Spectroscopic Detection: Interfaces And Applications From Elemental Speciation, Metal-Ligand Interaction To Indirect Determination

Trace Analysis of Heavy Metal Ions in Electroplate Waste Water by Capillary Electrophoresis with Visual Offline Sample Stacking Via Moving Neutralization Boundary

Quantitative Investigation on the Stacking of Metal Ions Induced by Another Metal Ion Based on Moving Substitution Boundary Electrophoresis

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

In-channel indirect amperometric detection of heavy metal ions for electrophoresis on a poly(dimethylsiloxane) microchip

Investigation of an Ion Migration Channel with Ion Preconcentration and Separation Based on Capillary Electrophoresis

Detection of Inorganic Ions on a Capillary Electrophoresis Microchip Using a Conductivity Technique

Microchip Electrophoretic Separation of Cu2+ , Co2+ and Ni2+ with Chemiluminescent Detection

Detection and extraction of heavy metal ions using paper-based analytical devices fabricated via atom stamp printing

CAPILLARY ELECTROPHORESIS FOR THE ANALYSIS OF TRACE METAL IONS USING PRE-COLUMN COMPLEXING WITH 4-(2-THIAZOLYLAZO)RESORCINOL

Determination of Heavy Metal Ions by Capillary Electrophoresis with Contactless Conductivity Detection after Field-amplified Sample Injection

Study on pre-concentration of trace heavy metal ions in water quality detection using FO-electroosmotic integrated chip

Electrophoretic chip based on special wettability surfaces for detection of heavy metals

Electrokinetically induced concentration of diluted sample by liquid metal embedded microfluidic chip

A Microscale Solid-Phase Extraction Poly(dimethylsiloxane) Chip for Enrichment and Fluorescent Detection of Metal Ions

A compact and high-performance setup of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C 4 D)