Abstract:A portable and low-cost miniaturized analysis system was proposed, in which microchip electrophoresis (MCE) and chemiluminescence (CL) were used as the separation and detection units, respectively. A porous monolithic plug was created in the separation channel of the microchip as a select valve, which prevented the pressure-driven CL reagents flowing back into the separation channel but allowed electrophoretic migration along the separation channel. The sensitivity was greatly enhanced by improving the mixing efficiency using a spiral detection channel with an increased length facing the photomultiplier tube (PMT). Peak width could be significantly reduced by increasing the flow rate of CL reagents. Putting grounding electrode before the detection channel significantly improved the reproducibility. A simple and compact subatmospheric pressure fluid-driven device was developed for manipulating the whole analytical process, including variable-volume sample loading, electrophoretic separation and CL reagents transportation. All miniaturized components for constructing a portable MCE-CL system are commercially available. This approach considerably simplified the operation and equipments for constructing an efficient MCE-CL system. Nine metal cations, such as Cr(III), Co(II), Cu(II), Ni(II), Au(III), Mn(II), Zn(II), Pt(II), Pb(II) were successfully separated within 200 s. Migration time precisions ranging from 0.39% for Cr(III) to 2.1% for Cu(II) were obtained for ten consecutive determinations with peak height precisions from 1.67% for Co(II) to 5.73% for Pb(II). Detection limits ranging from 7.5 x 10(-11) mol L(-1) for Co(II) to 8.3 x 10(-9) mol L(-1) for Pb(II) were achieved, which were about three orders lower than the present MCE-CL system. It has been applied for the determination of metals in tea. The results with the recoveries from 97.0% to 102.3% proved that the proposed MCE-CL system offers a number of benefits including miniaturization, high sensitivity and better resolution.

Microchip Electrophoretic Separation of Cu2+ , Co2+ and Ni2+ with Chemiluminescent Detection

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

Capillary Electrophoresis Microchip Coupled with On-Line Chemiluminescence Detection

Microfluidic Chip Detection Instrument With High Signal-To-Noise Ratio

Capillary Electrophoresis System with Flow Injection Sample Introduction and Chemiluminescence Detection on a Chip Platform.

In-channel indirect amperometric detection of heavy metal ions for electrophoresis on a poly(dimethylsiloxane) microchip

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Improving Sensitivity for Microchip Electrophoresis Interfaced with Inductively Coupled Plasma Mass Spectrometry Using Parallel Multichannel Separation

A Study on the System of Nonaqueous Microchip Electrophoresis with On-Line Peroxyoxalate Chemiluminescence Detection.

Simultaneous Determination of Copper(II) and Cobalt(II) by Ion Chromatography Coupled with Chemiluminescent Detection

Separation of catecholamines by microchip electrophoresis with a simple integrated laser-induced fluorescence detector

A Microfluidic Chip Based Sequential Injection System with Trapped Droplet Liquid-Liquid Extraction and Chemiluminescence Detection

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

A Microfluidic Chip Integrated With a Carbon Nanotube-Polydimethylsiloxane Electrode Array for Simultaneous Detection of Cd 2+ , Pb 2+ , and Hg 2+

Microchip capillary electrophoresis with solid-state electrochemiluminescence detector.

A Chip-based Capillary Electrophoresis System for High-efficiency Bioanalysis

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Integration of a Flow-Type Chemiluminescence Detector on a Glass Electrophoresis Chip.

Electrophoretic Separation in a Microfluidic Paper-Based Analytical Device with an On-Column Wireless Electrogenerated Chemiluminescence Detector

Electrophoretic chip based on special wettability surfaces for detection of heavy metals