Abstract:Inert atmosphere is normally necessary for fabrication of solid composite electrolytes (SCEs) as a crucial part of solid-state Li-metal batteries in order to avoid undesirable reactions induced by ambient moisture. Herein, we developed an air-processable technique to fabricate SCEs by employing LiCF3SO3 (LiOTf) as the Li salt, which was combined with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) as the fast Li-conductor and polyvinylidene difluoroethylene/polyvinyl acetate (PVDF/PVAC) as the polymer matrix. With the assistance of trace H2O dissolved in electrolyte solution, the room-temperature Li+ conductivity of the obtained aSCE reached as high as 5.09 × 10-4 S cm-1, which was over 3 orders of magnitude higher than that of the one (iSCE, 1.93 × 10-7 S cm-1) cast by the electrolyte solution prepared in an inert atmosphere. The theoretical calculation results reveal that the oxygen atom of H2O exhibits a high propensity to interact with the Li atom in LiOTf (Li···O), thereby establishing a hydrogen bond with the oxygen atom (H···O) in N,N-dimethylformamide (solvent). Such interactions promoted the dissociation of LiOTf and led to the formation of uniform Li+ transportation channels. Simultaneously, the composition distribution was also altered, resulting in a smoother surface of aSCE and lowered crystallinity of PVDF. On this basis, the LiOTf/LLZTO/PVDF/PVAC solution at 60 °C was directly coated onto the surface of the LiFePO4 (LFP) cathode to fabricate the LFP-aSCE film after drying in an oven. The assembled LFP-aSCE/Li battery wetted by trace sulfolane exhibited an initial Coulombic efficiency of 94.7% and a capacity retention rate of up to 96% at 0.2 C (137 mAh g-1) after 180 cycles and a high capacity of 143.7 mAh g-1 at 0.5 C (150 cycles). Overall, this work could pave the way for the facile fabrication of solid electrolytes.

A Super‐Hydrophobic Quasi‐Solid Electrolyte for Li‐O2 Battery with Improved Safety and Cycle Life in Humid Atmosphere

A Synergistic System for Lithium–Oxygen Batteries in Humid Atmosphere Integrating a Composite Cathode and a Hydrophobic Ionic Liquid‐Based Electrolyte

Dispersion hydrophobic electrolyte enables lithium-oxygen battery enduring saturated water vapor

Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte

A Unique Hybrid Quasi-Solid-State Electrolyte for Li-O2 Batteries with Improved Cycle Life and Safety

Clean Electrocatalysis in a Li2O2 Redox-Based Li–O2 Battery Built with a Hydrate-Melt Electrolyte

Oxygen-Permeable and Moisture-Proof Membrane for Stable Li-O2/Air Batteries in Humid Working Environment

H2O Self-Trapping Air Cathode of Li–O2 Battery Enabling Low Charge Potential Operating in Dry System

Integrated Design for Regulating the Interface of a Solid-State Lithium-Oxygen Battery with an Improved Electrochemical Performance.

Hybrid solid electrolyte enabled dendrite-free Li anodes for high-performance quasi-solid-state lithium-oxygen batteries

Effects of H2O on Improving the Performance of a Solid Composite Electrolyte Fabricated via an Air-Processable Technique

A Hydrophobic Membrane to Enable Lithium-Air Batteries to Operate in Ambient Air with a Long Cycle Life

Ultralong-Life Quasi-Solid-State Li-O-2 Batteries Enabled by Coupling Advanced Air Electrode Design with Li Metal Anode Protection

Improving Electrochemical Stability and Low‐Temperature Performance with Water/Acetonitrile Hybrid Electrolytes

Protecting Li-metal in O<sub>2</sub> atmosphere by a sacrificial polymer additive in Li-O<sub>2</sub> batteries

Advanced Hybrid Electrolyte Li-O2 Battery Realized by Dual Superlyophobic Membrane

Crown Ether Electrolyte Induced Li2O2 Amorphization for Low Polarization and Long Lifespan Li‐O2 batteries

Double-Phase Electrolyte Enabling the Long-Lasting Redox Mediation in Li–O2 Batteries

3D Porous Garnet/Gel Polymer Hybrid Electrolyte for Safe Solid-State Li–O2 Batteries with Long Lifetimes

High Charging Voltage Stable and Air Atmosphere Stable Li–O 2 Batteries with an Electrolyte Based on Succinonitrile and In Situ Artificial SEI Construction