Abstract:Inert atmosphere is normally necessary for fabrication of solid composite electrolytes (SCEs) as a crucial part of solid-state Li-metal batteries in order to avoid undesirable reactions induced by ambient moisture. Herein, we developed an air-processable technique to fabricate SCEs by employing LiCF3SO3 (LiOTf) as the Li salt, which was combined with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) as the fast Li-conductor and polyvinylidene difluoroethylene/polyvinyl acetate (PVDF/PVAC) as the polymer matrix. With the assistance of trace H2O dissolved in electrolyte solution, the room-temperature Li+ conductivity of the obtained aSCE reached as high as 5.09 × 10-4 S cm-1, which was over 3 orders of magnitude higher than that of the one (iSCE, 1.93 × 10-7 S cm-1) cast by the electrolyte solution prepared in an inert atmosphere. The theoretical calculation results reveal that the oxygen atom of H2O exhibits a high propensity to interact with the Li atom in LiOTf (Li···O), thereby establishing a hydrogen bond with the oxygen atom (H···O) in N,N-dimethylformamide (solvent). Such interactions promoted the dissociation of LiOTf and led to the formation of uniform Li+ transportation channels. Simultaneously, the composition distribution was also altered, resulting in a smoother surface of aSCE and lowered crystallinity of PVDF. On this basis, the LiOTf/LLZTO/PVDF/PVAC solution at 60 °C was directly coated onto the surface of the LiFePO4 (LFP) cathode to fabricate the LFP-aSCE film after drying in an oven. The assembled LFP-aSCE/Li battery wetted by trace sulfolane exhibited an initial Coulombic efficiency of 94.7% and a capacity retention rate of up to 96% at 0.2 C (137 mAh g-1) after 180 cycles and a high capacity of 143.7 mAh g-1 at 0.5 C (150 cycles). Overall, this work could pave the way for the facile fabrication of solid electrolytes.

A Synergistic System for Lithium–Oxygen Batteries in Humid Atmosphere Integrating a Composite Cathode and a Hydrophobic Ionic Liquid‐Based Electrolyte

Ambient Lithium–SO2 Batteries with Ionic Liquids As Electrolytes

Coupling Water‐Proof Li Anodes with LiOH‐Based Cathodes Enables Highly Rechargeable Lithium–Air Batteries Operating in Ambient Air

A Super‐Hydrophobic Quasi‐Solid Electrolyte for Li‐O2 Battery with Improved Safety and Cycle Life in Humid Atmosphere

Dispersion hydrophobic electrolyte enables lithium-oxygen battery enduring saturated water vapor

Water-proof, Electrolyte-Nonvolatile, and Flexible Li-Air Batteries Via O2-Permeable Silica-Aerogel-reinforced Polydimethylsiloxane External Membranes

Oxygen-Permeable and Moisture-Proof Membrane for Stable Li-O2/Air Batteries in Humid Working Environment

High Charging Voltage Stable and Air Atmosphere Stable Li–O 2 Batteries with an Electrolyte Based on Succinonitrile and In Situ Artificial SEI Construction

Clean Electrocatalysis in a Li2O2 Redox-Based Li–O2 Battery Built with a Hydrate-Melt Electrolyte

Novel Composite Polymer Electrolyte for Lithium Air Batteries

A High-Performance Li-O2/Air Battery System with Dual Redox Mediators in the Hydrophobic Ionic Liquid-Based Gel Polymer Electrolyte

Li-air Battery with a Superhydrophobic Li-Protective Layer.

From Lithium‐Oxygen to Lithium‐Air Batteries: Challenges and Opportunities

Understanding Moisture and Carbon Dioxide Involved Interfacial Reactions on Electrochemical Performance of Lithium-Air Batteries Catalyzed by Gold/Manganese-Dioxide

Stable Lithium Metal Anodes with a GaOx Artificial Solid Electrolyte Interphase in Damp Air

Lithium-Air Batteries with Hybrid Electrolytes

Effects of H2O on Improving the Performance of a Solid Composite Electrolyte Fabricated via an Air-Processable Technique

Advanced Hybrid Electrolyte Li-O2 Battery Realized by Dual Superlyophobic Membrane

A Long‐Life Lithium–Air Battery in Ambient Air with a Polymer Electrolyte Containing a Redox Mediator

Air‐Stable and Dendrite‐Free Lithium Metal Anodes Enabled by a Hybrid Interphase of C60 and Mg