Abstract:Organic electroactive materials derived from biomasses are promising candidates for next generation rechargeable batteries due to low cost, sustainability and environmental benignity. However, the organic electrodes still suffer from low power density and poor cycling stability, caused by low electronic conductivity and high solubility in liquid organic electrolytes. Herein, we firstly reported a unique in situ organic electrode fabrication technology for Na-ion batteries. Using the 2,5-Dihydroxy-1,4-benzoquinone disodium salt (DHBQDS) as an organic anode, the DHBQDS nanorod electrode is in situ formed during electrode fabrication process by precipitating DHBQDS from DHBQDS-sodium alginate-carbon black aqueous slurry film on a Cu current collector during drying process. In the slurry film, the sodium alginate binder and carbon black play a critical role in the formation of DHBQDS nanorods. Integrating the synthesis of nano-electrode materials into electrode fabrication process greatly simplifies the electrode preparation process and will significantly reduce the battery cost. Due to the fast ionic and electronic conduction of DHBQDS-carbon nanocomposite, the DHBQDS nanorod electrodes deliver a reversible capacity of 167 mAh g-1 at a high current density of 200 mA g-1 after 300 cycles, which is 87% of its initial capacity (capacity decay rate of 0.051% per cycle). To reduce the dissolution of DHBQDS in the electrolyte upon cycling, a thin layer of Al2O3 with thickness of 1nm or 2 nm was coated on the DHBQDS nanorod electrodes using atomic layer deposition (ALD). The Al2O3 coating remarkably suppresses the dissolution of DHBQDS nanorods as evidenced by the increased Coulombic efficiency from 94% to ~100% at a low current density of 50 mA g-1 after initial few activation cycles. The reversible capacity of Al2O3 coated DHBQDS nanorod electrodes remains at 212 mAh g-1 after 300 cycles with a very low capacity decay rate of 0.049% per cycle. The ALD enhanced organic nanorods exhibit the best reversible capacity and cycle life among the organic electrodes reported for Na-ion batteries.

An Iodine Quantum Dots Based Rechargeable Sodium–Iodine Battery

An All‐Prussian‐Blue‐Based Aqueous Sodium‐Ion Battery

Reversible Redox Chemistry of Azo Compounds for Sodium‐Ion Batteries

Rechargeable Lithium-Iodine Batteries with Iodine/Nanoporous Carbon Cathode

Anchoring Polyiodide to Conductive Polymers As Cathode for HighPerformance Aqueous Zinc-Iodine Batteries

Fully Conjugated Phthalocyanine Copper Metal-Organic Frameworks for Sodium-Iodine Batteries with Long-Time-Cycling Durability.

Realizing Few‐Layer Iodinene for High‐Rate Sodium‐Ion Batteries

High-performance rechargeable aqueous zinc-iodine batteries via a dual strategy of microporous carbon nanotubes for cathodic iodine immobilization and modified separator

Hydrogen Bond-Induced Configuration and Electron Transfer on Layered Double Hydroxide for High-Performance Sodium-Iodine Batteries

A Versatile Redox-Active Electrolyte for Solid Fixation of Polyiodide and Dendrite-Free Operation in Sustainable Aqueous Zinc-Iodine Batteries

High Energy Density CNT/NaI Composite Cathodes for Sodium‐Ion Batteries

Aqueous Rechargeable Manganese/Iodine Battery

A High Capacity, Good Safety and Low Cost Na2FeSiO4-Based Cathode for Rechargeable Sodium-Ion Battery.

Advanced Zinc–Iodine Batteries with Ultrahigh Capacity and Superior Rate Performance Based on Reduced Graphene Oxide and Water‐in‐Salt Electrolyte

NaSbF4 Nanoparticles As Solid-State Electrolytes in Sodium-Iodine Batteries: Sodium Ion Transport Via Conversion Reaction and Shuttle Effect Retarded by Fluoride

High Stability and Long Cycle Life of Rechargeable Sodium-Ion Battery Using Manganese Oxide Cathode: A Combined Density Functional Theory (DFT) and Experimental Study

In Situ Precipitated Organic Nanorod Electrodes for Sodium Ion Batteries

Encapsulation of Iodine in Nitrogen-Containing Porous Carbon Plate Arrays on Carbon Fiber Cloth as a Freestanding Cathode for Lithium-Iodine Batteries

Advanced Zn–I 2 Battery with Excellent Cycling Stability and Good Rate Performance by a Multifunctional Iodine Host

In-situ investigation and application of cyano-substituted organic electrode for rechargeable aqueous Na-ion batteries

A Few-Layer Sns2/Reduced Graphene Oxide Sandwich Hybrid for Efficient Sodium Storage