Shape memory behavior of Ti–20Zr–10Nb–5Al alloy subjected to annealing treatment

Zhi-Guo Yu,Cheng-Yang Xiong,Peng-Fei Xue,Yan Li,Bi-Fei Yuan,Wen-Tao Qu

DOI: https://doi.org/10.1007/s12598-016-0799-z

IF: 6.318

2016-01-01

Rare Metals

Abstract:The effects of annealing temperature on microstructures, phase transformation, mechanical properties, and shape memory effect of Ti–20Zr–10Nb–5Al alloy were investigated. X-ray diffraction (XRD) patterns show that the alloy is composed of single hexagonal α′-martensite phase for both as-rolled sample and sample annealed at 773 K for 30 min, while single orthorhombic α″ phase exists in the samples annealed at 873 and 973 K for 30 min. The optical observations indicate that the alloy is recrystallized when annealed at 873 K, and the grain size of the sample annealed at 973 K is about five times larger than that annealed at 873 K. Both of the samples annealed at 873 and 973 K show almost the same reverse martensite transformation start temperature of 483 K as demonstrated by thermal dilatation tests. The critical stress values for martensite reorientation ( σ M ) are 392 and 438 MPa for the alloys annealed at 873 and 973 K, respectively. The maximum shape memory strain is 2.8 %, which is obtained in the alloy annealed at 873 K due to the lower σ M . Moreover, the sample annealed at 873 K exhibits larger tensile stress and tensile strain due to the smaller grain size.