Abstract:Polypropylene (PP) is still one of the most important general plastics, and it is of great significance to achieve high-performance PP materials. As a semicrystalline polymer, PP is essentially polymorphism. At least five polymorphs have been identified, i.e., alpha, beta, delta, d and quasi-hexagonal form. Among them, beta form is highly desirable, due to its excellent physical properties. However, beta crystals are hard to be obtained via common crystalline condition. The polymorphic modification by adding beta-nucleator (beta-NA) is a powerful method for achieving dominant beta form and thus tailoring the toughness and thermal stability of PP. In contrast to many past researches which focused on the roles of crystallinity and beta-phase content, a new methodology has been recently suggested which optimized the physical properties of PP by controlling beta-crystalline morphology. Some relevant studies include: (1) to assess the solubility and self-assembly behavior of beta-NA by using temperature gradient (g-T) field; (2) to control the beta-crystalline morphology by processing varables and beta-NA content, and receive super-high toughness and good heat stability; (3) to reveal the rule of stretching-induced porosity in the beta-PP films with different crystalline morphologies. beta-NA of low-molecular-weight is soluble in the melt of PP, which will self-assemble into supermolecular structures prior to the primary crystallization of PP during the cooling process. Such supermolecular structures act as templates for the guidance of PP crystallization, resulting in special crystalline morphologies. By using the g-T technique, the dependence of beta-NA solubility on molten temperature and nucleator loading could be clarified readily. Thus the crystalline morphology of beta-PP is controllable, and different morphologies, such as spherulite, transcrystallinity and flower-like aggregations, are achievable through adjusting the solubility and self-assembly behavior of beta-NA. Special crystalline morphology leads to a significant increase in the tensile ductility of beta-PP. Meanwhile, the heat distortion temperature and homogeneity of microporosity are also strongly dependent on beta-crystalline morphology. Obviously, the manipulation of crystalline morphology is a promising pathway to realize high-performance in crystalline polymers.

Reinforcement for polypropylene via self-assembly of β-form nucleating agent: new insight on the perpendicular orientation of lamellae

Controllable Reinforcement of Stiffness and Toughness of Polypropylene Via Thermally Induced Self‐assembly of Β‐nucleating Agent

Formation Mechanism of Hybrid Shish Kebab and Its Reinforcing Effects on Polypropylene

Control over Β-Form Hybrid Shish-Kebab Crystals in Polypropylene Pipe Via Coupled Effect of Self-Assembly Β Nucleating Agent and Rotation Extrusion

Toward Subtle Manipulation of Fine Dendritic Β-Nucleating Agent in Polypropylene.

Crystalline Composition And Morphology In Isotactic Polypropylene Pipe Under Combining Effects Of Rotation Extrusion And Fibril Beta-Nucleating Agent

Influence of nucleating agent self-assembly on structural evolution of isotactic polypropylene during uniaxial stretching

Shear-Induced Precursor Relaxation-Dependent Growth Dynamics and Lamellar Orientation of Β-Crystals in Β-Nucleated Isotactic Polypropylene

Shear induced shish–kebab structure in PP and its blends with LLDPE

The effect of β-nucleating agent on the self-nucleation of isotactic polypropylene

Insight into unique deformation behavior of oriented isotactic polypropylene with branched shish-kebabs

The effect of soluble -nucleator's content on crystalline structure and performance of polypropylene pipe

Fracture Resistance Improvement of Polypropylene by Joint Action of Core–shell Particles and Nucleating Agent

Preparation and Properties of Self-Reinforced Polypropylene Composites Modified with Β-Nucleating Agents

Interfacial Shish-Kebabs Lengthened by Coupling Effect of in Situ Flexible Nanofibrils and Intense Shear Flow: Achieving Hierarchy to Conquer the Conflicts Between Strength and Toughness of Polylactide

Β/α Transformation of Β-Polypropylene During Tensile Deformation: Effect of Crystalline Morphology

Synergistic toughening effects of elastomer toughener and nucleating agent on mechanical properties and crystallization behaviors of polypropylene

Synergistic Enhancement of Crystallization and Mechanical Performance of Polypropylene Random Copolymer by Strong Shear and Β‐nucleating Agent

Toward High-performance Polypropylene via Controlling Crystalline Morphology

Tailoring the mechanical properties of binary polypropylene blends with polymorphic and oriented hierarchical structures

Supramolecular Self‐assembly of Compound Β Nucleating Agent and Effect on Polypropylene Microporous Membrane