Significantly Enhanced Recoverable Energy Storage Density in Potassium–sodium Niobate-Based Lead Free Ceramics

Zetian Yang,Hongliang Du,Shaobo Qu,Yudong Hou,Hua Ma,Jiafu Wang,Jun Wang,Xiaoyong Wei,Zhuo Xu

DOI: https://doi.org/10.1039/c6ta04107h

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:The findings in this study could broaden the applications of KNN materials in a new field.

What problem does this paper attempt to address?

Potassium–sodium Niobate Based Lead-Free Ceramics: Novel Electrical Energy Storage Materials

Tengqiang Shao,Hongliang Du,Hua Ma,Shaobo Qu,Jun Wang,Jiafu Wang,Xiaoyong Wei,Zhuo Xu

DOI: https://doi.org/10.1039/c6ta07803f

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:A design methodology for developing lead-free bulk ceramics with large recoverable energy storage density was proposed in this study.
Significant Increase in Comprehensive Energy Storage Performance of Potassium Sodium Niobate-Based Ceramics Via Synergistic Optimization Strategy

Miao Zhang,Haibo Yang,Ying Lin,Qibin Yuan,Hongliang Du

DOI: https://doi.org/10.1016/j.ensm.2021.12.037

IF: 20.4

2022-01-01

Energy Storage Materials

Abstract:K0.5Na0.5NbO3 (KNN)-based ceramics are considered as one of the most promising lead-free dielectric ceramics owing to relatively high dielectric breakdown strength (DBS) resulted from their unique submicron grains. Unfortunately, it has been difficult to increase recoverable energy-storage density (W-rec) and energy-storage efficiency (eta) simultaneously at present. Herein, we propose a synergistic optimization strategy, namely, simultaneously enhancing DBS by tailoring grain size to submicron scale and inducing the temperature range between the maximum dielectric permittivity temperature (T-max ) and the Burns temperature (T-B) to room temperature, for solving the bottleneck. (1- x)K0.5Na0.5NbO3- xBi(Ni0.5Zr0.5)O-3(KNN-BNZ) ceramics were chosen as an example to illustrate the validity of this strategy. An ultrahigh W-rec of 8.09 J.cm(-3) was obtained at the optimum composition of x = 0.15 under the electric field of 870 kV .cm(-1), which is much higher than those of other reported KNNbased ceramics. Most importantly, this high W-rec was accompanied by a high eta of 88.46%, which is superior to those of other KNN-based ceramics and very important for practical applications. The excellent comprehensive energy storage performance was resulted from the polar nanoregions, which is confirmed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), piezo-force microscopy (PFM) and first order reversal curve (FORC) distributions. The work not only finds out novel KNN-based ceramics with excellent comprehensive energy storage properties, but also provides a remarkable designing strategy for exploring a series of novel lead-free dielectric ceramics with high energy storage properties for practical applications in the future.
Significantly Improved Energy Storage Performances of K0.5Na0.5NbO3 Lead-Free Ceramics Via Composition Optimization Strategy

Minquan Wang,Ying Lin,Qibin Yuan,Miao Zhang,Yiwen Yu,Fei Yan,Haibo Yang

DOI: https://doi.org/10.1039/d3qi00676j

IF: 7.779

2023-07-09

Inorganic Chemistry Frontiers

Abstract:Ceramic dielectric materials for energy storage have been widely investigated because of their superiorities of rapid charge/discharge speed and ultra-high power density. However, there are no significant breakthroughs in integrative energy storage density and efficiency improvements. In this work, A composition optimization scheme for boosting synergistic energy storage performances of K0.5Na0.5NbO3 (KNN)-based ceramics was proposed, namely, diminishing grain sizes to sub-micron scale for enhancing the breakdown strength (BDS) and generating the polar nanoregions (PNRs) for reducing the remnant polarization (Pr) by incorporating the Bi3+ ion and (Mg2/3Ta1/3)3+ multiple ions into A-site and B-site of KNN matrix. As a result, it is confirmed that an ultrahigh recoverable energy storage density (Wr) of 6.14 J∙cm-3 and a high energy storage efficiency (η) of 87% are realized simultaneously for the (1-x)K0.5Na0.5NbO3-xBi(Mg2/3Ta1/3)O3 (KNN-BMT) ceramics at x=0.15 under 720 kV∙cm-1, which surpass most other reported lead-free ceramics. Moreover, the outstanding thermal and frequency stability associated with variation rates of Wr and η below 10% is verified. All these merits indicate that the doped Bi(Mg2/3Ta1/3)O3 component leads to optimized energy storage performances. This work may attract significant attention in exploring ceramic dielectric capacitors with excellent properties for energy storage applications.

chemistry, inorganic & nuclear
Lead-free KNN-based Ceramics Incorporated with Bi(Zn2/3Nb1/3)O3 Possessing Excellent Optical Transmittance and Superior Energy Storage Density

Xuewen Peng,Bin Yang,Danjiang Deng,Zhiwei Cai,Xi Kong,Letao Yang,Jinming Guo

DOI: https://doi.org/10.1016/j.materresbull.2023.112294

IF: 5.6

2023-01-01

Materials Research Bulletin

Abstract:The application of lead-free dielectric ceramics for energy storage has received extensive attention because of their remarkable potential as pulse capacitors in power electronic devices. The current study developed a strategy for improving the energy storage performance of (K0.5Na0.5)NbO3 (KNN)-based ceramics by incorporating Bi(Zn2/3Nb1/3)O3 to reduce grain size, increase dielectric breakdown strength, and enhance ferroelectric relaxation degree. The resulting 0.87KNN-0.13BZN ceramics exhibited a high energy density (7.4 J/cm3) and moderate energy efficiency (74%) at an ultrahigh electric field (750 kV/cm) as well as excellent optical properties. Therefore, the 0.87KNN-0.13BZN ceramic is a promising candidate for pulse capacitors, providing a feasible approach for the development of new lead-free energy storage materials.
Energy Storage Performance of K0.5Na0.5NbO3-based Ceramics Modified by Bi(Zn2/3(Nb0.85Ta0.15)1/3)O3

Miao Zhang,Haibo Yang,Yiwen Yu,Ying Lin

DOI: https://doi.org/10.1016/j.cej.2021.131465

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:The damage of lead-based ceramics to our environment and health completely hindered their industrial applications. K0.5Na0.5NbO3 (KNN) ceramic material is considered as a good substitute for lead-free ceramics because of its high dielectric constant, excellent piezoelectric properties, high Curie temperature and sustainability. However, it is challenging to achieve their high energy-storage performances because of their large energy loss density (W-loss) under an applied electric field. Thus, this work proposes a combinatorial optimization strategy of inducing polar nano-regions and improving breakdown strength (BDS) to enhance the energy-storage performances of the KNN-based ceramics. As a result, we obtained a record high recoverable energy-storage density (Wrec) value of 7.4 J.cm(-3) for the Bi(Zn-2/3(Nb0.85Ta0.15)(1/3))O-3 (BZNT)-modified KNN ceramic mainly due to its enhanced BDS. Furthermore, remarkable temperature stability was obtained for the 0.90KNN-0.10BZNT ceramic over a wide temperature range (20-180 degrees C). Remarkably, the first-order reversal curve (FORC) confirmed the excellent energy-storage performances of the 0.90KNN-0.10BZNT ceramic, which we ascribed to its enhanced relaxation behavior. Additionally, 0.90KNN-0.10BZNT material exhibited excellent pulsed charge/discharge properties of the high power density (184.84 MW.cm(-3)) and fast discharge time (46.3 ns). Our results demonstrated a novel strategy for improving the energy-storage performances of dielectric ceramics. This strategy could be used to design other or similar materials for various applications.
Enhancement of Recoverable Energy Density and Efficiency of K0.5Na0.5NbO3 Ceramic Modified by Bi(Mg0.5Zr0.5)O3

Renrui Hu,Ying Lin,Miao Zhang,Qibin Yuan,Haibo Yang

DOI: https://doi.org/10.1016/j.mtener.2022.101185

IF: 9.257

2022-01-01

Materials Today Energy

Abstract:As one of the most popular lead-free energy storage materials, K0.5Na0.5NbO3 (KNN)-based ceramics are expected to replace lead-based ceramics due to their high dielectric constant, high Curie temperature, and environmental friendliness. However, the high remnant polarization (Pr) and low breakdown strength (BDS) of KNN ceramic lead to its low energy storage properties, which limits its applications in energy storage field. In this work, the energy storage properties of KNN ceramic were improved by reducing average grain size and enhancing relaxor behavior. The 0.85K0.5Na0.5NbO3-0.15Bi(Mg0.5Zr0.5)O3 (0.85KNN-0.15BMZ) ceramic prepared by the solid state method not only has high recoverable energy storage density value (Wrec) of 3.47 J cm-3 but also has high energy storage efficiency value (n) of 89.14% at a high applied electric field of 320 kV/cm. In addition, the Wrec and n of 0.85KNN-0.15BMZ ceramic fluctuate slightly over the whole temperature range of 20-120 degrees C at 200 kV/cm, showing excellent temperature stability. At the same time, it can be concluded by first-order reversal curve distribution that 0.85KNN-0.15BMZ ceramic has excellent energy storage properties due to their enhanced relaxor behavior. In summary, the 0.85KNN-0.15BMZ ceramic can be used as the novel dielectric capacitor materials.
Giant energy storage efficiency and high recoverable energy storage density achieved in K0.5Na0.5NbO3-Bi(Zn0.5Zr0.5)O3 ceramics

Miao Zhang,Haibo Yang,Da Li,Liang Ma,Ying Lin

DOI: https://doi.org/10.1039/d0tc01711f

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:K0.5Na0.5NbO3 (KNN)-based ceramics, as promising candidate materials that could replace lead-based ceramics, exhibit outstanding potential in pulsed power systems due to their large dielectric constant, high Curie temperature and environmental friendliness.
Achieving outstanding temperature stability in KNN-based lead-free ceramics for energy storage behavior

Qifan Chen,Tingting Gao,Rong Lang,Zhi Tan,Jie Xing,Jianguo Zhu

DOI: https://doi.org/10.1016/j.jeurceramsoc.2023.01.025

IF: 5.7

2023-02-08

Journal of the European Ceramic Society

Abstract:Lead-free ceramics with prominent energy storage properties are identified as the most potential materials accessed in the dielectric capacitors. Nevertheless, high recoverable energy storage density ( W rec ), large energy storage efficiency ( η ) and preferable temperature stability can hardly be met simultaneously. The Bi(Zn 2/3 Ta 1/3 )O 3 and NaNbO 3 components are doped in KNN ceramics to substantiate the reliability of this tactic. A high recoverable energy density ( W rec ) of ∼ 4.55 J/cm 3 and a large energy storage efficiency ( η ) of ∼ 87.8% are acquired under the dielectric breakdown strength (DBS) of ∼ 375 kV/cm, along with a splendid thermal stability ( W rec variation: ∼ 2.3%, η variation: ∼ 4.9%) within the temperature range of 20 °C− 120 °C. This article demonstrates that the KNN-based ceramics integrate high energy storage properties and outstanding temperature stability at the same time, which broadens the application fields of pulse power systems.

materials science, ceramics
Realizing High Comprehensive Energy Storage and Ultrahigh Hardness in Lead-Free Ceramics

Jie Xing,Yanli Huang,Qian Xu,Bo Wu,Qiming Zhang,Zhi Tan,Qiang Chen,Jiagang Wu,Jianguo Zhu

DOI: https://doi.org/10.1021/acsami.1c05153

2021-06-09

Abstract:Due to the presence of pores and low density, a high recoverable energy density (Wrec) value is usually obtained at the cost of energy storage efficiency (η) in lead-free potassium sodium niobate [(K, Na)NbO3, KNN] based ceramics, which also affects the hardness of ceramics, finally limiting the further development of practical applications. A high Wrec (∼3.60 J/cm3 ) and a high η (∼74.2%) are obtained in 0.975K0.5Na0.5NbO3-0.025LaBiO3 (0.975KNN-0.025LB) ceramics simultaneously under a high dielectric breakdown strength (DBS) of 340 kV/cm, together with a fast discharge rate (t0.9 ∼ 46 ns) and high power density (PD ∼ 49.4 MW/cm3). Further analysis of the intrinsic electronic structure is carried out via the first-principles calculation based on the density functional theory (DFT). An ultrahigh hardness (H) of 6.63 GPa can be accordingly obtained. This work combines excellent energy storage properties and ultrahigh hardness, which provides significant guidelines for applications in pulsed-power systems.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05153</a>.Mechanical properties of KNN-xLB ceramics derived from Vickers indentation test (Table S1); SEM images of KNN-xBL ceramics (Figure S1); crystal structure parameters of KNN-xBL ceramics (Table S2); inverse dielectric permittivity as a function of temperature (Figure S2); vertical piezoelectric force microscopy (VPFM) images (Figure S3); vertical piezoresponse force microscopy (VPFM) amplitude (Figure S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05153/suppl_file/am1c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Giant energy storage efficiency and high recoverable energy storage density achieved in K0.5Na0.5NbO3-Bi(Zn0.5Zr0.5)O3 ceramics

Miao Zhang,Haibo Yang,Da Li,Liang Ma,Ying Lin

DOI: https://doi.org/10.1039/d0tc01711f

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:K0.5Na0.5NbO3(KNN)-based ceramics, as promising candidate materials that could replace lead-based ceramics, exhibit outstanding potential in pulsed power systems due to their large dielectric constant, high Curie temperature and environmental friendliness. Although a large amount of KNN-based ceramics with high recoverable energy storage density (W-rec) have been designed for energy storage applications, the relatively low energy storage efficiency (eta) limits their further development. In this work, a record high for eta(86.8%) and a giantW(rec)(3.50 J cm(-3)) were simultaneously obtained in the 0.85K(0.5)Na(0.5)NbO(3)-0.15Bi(Zn0.5Zr0.5)O-3(0.85KNN-0.15BZZ) ceramic, thanks to the introduction of Bi(Zn0.5Zr0.5)O-3(BZZ), which increased the relaxation behavior and enhanced the breakdown strength (BDS). Furthermore, desirableW(rec)and eta with a variation of less than 10% can be accordingly obtained in the temperature range of 20-120 degrees C. More importantly, it can be confirmed by the first-order reversal curve (FORC) distribution that the outstanding energy storage performances of the 0.85KNN-0.15BZZ ceramic should be ascribed to its desirable relaxor ferroelectric performances. In addition, the 0.85KNN-0.15BZZ ceramic displays excellent pulsed charging-discharging performances with an outstanding power density of 33.76 MW cm(-3), a current density of 562.63 A cm(-2)and a fast discharge speed (t(0.9)= 114.6 ns). The results reveal that the 0.85KNN-0.15BZZ ceramic is an attractive candidate material for next-generation dielectric capacitors.
Significantly Improved Energy Storage Performances of K0.5Na0.5NbO3 Lead-Free Ceramics Via a Composition Optimization Strategy

Minquan Wang,Ying Lin,Qibin Yuan,Miao Zhang,Yiwen Yu,Fei Yan,Haibo Yang

DOI: https://doi.org/10.1039/d3qi00676j

IF: 7.779

2023-01-01

Inorganic Chemistry Frontiers

Abstract:Ceramic dielectric materials for energy storage have been widely investigated because of the superior advantages of a rapid charge/discharge speed and ultra-high power density.
Superior Energy Storage Properties with Prominent Thermal Stability in Lead-Free KNN-based Ceramics Through Multi-Component Optimization Strategy

Qifan Chen,Hao Chen,Dong Wang,Tingting Gao,Qinyu Li,Rong Lang,Zhi Tan,Jie Xing,Jianguo Zhu

DOI: https://doi.org/10.1016/j.cej.2024.152823

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The advancement of high energy storage properties and outstanding temperature stability ceramics plays a decisive role in the field of pulsed power systems. The multi-component optimization strategy is conducted by introducing Li+, Bi(Ni1/2Zr1/2)O3 and NaNbO3 into KNN-based ceramics. An excellent energy storage (W) of 7.82 J/cm3 along with a large efficiency (eta) of 81.8 % is achieved at the breakdown strength (BDS) of 500 kV/cm for the ceramics. Simultaneously, the remarkable energy storage thermal stability (Delta Wrec: - 2.9 %, Delta eta: - 3.9 %) is acquired in the range from 20 degrees C to 100 degrees C. The splendid charging-discharging performances (discharge energy density Wd = 1.78 J/cm3, current density CD = 1376 A/cm2, power density PD = 124 MW/cm3) are also realized in the ceramics after doping. By investigating the evolution of crystal structure and domain structure, complex impedance and first-principle calculations, the internal mechanism of obtaining superior energy storage properties is analyzed. Thus, this research proves that the ceramics can effectively broaden the temperature range of the applications for the pulsed power systems while maintaining high energy storage properties, which offers a valuable approach for the improvement of dielectric capacitors.
A New Family of Sodium Niobate-Based Dielectrics for Electrical Energy Storage Applications

Zetian Yang,Hongliang Du,Li Jin,Qingyuan Hu,Shaobo Qu,Zhaoning Yang,Ying Yu,Xiaoyong Wei,Zhuo Xu

DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.03.030

IF: 5.7

2019-01-01

Journal of the European Ceramic Society

Abstract:Although tremendous achievements have been made in enhancing recoverable energy storage density (W-rec) of lead-free dielectric ceramics for electrical energy storage applications in recent years, these ceramics with high W-rec still have two disadvantages: complex chemical composition and difficult preparation process. In this work, we selected NaNbO3 (NN)-based ceramics as base materials and used Bi2O3 as a sintering aid to reduce porosity and enhance dielectric breakdown strengths. Encouragingly, high W-rec, simple chemical composition and facile preparation process were simultaneously realized in 0.77NaNbO(3)-0.23BaTiO(3) (0.77NN-0.23BT) ceramics. A large W-rec of 1.5 J cm(-3) at 175 kV cm(-1) and excellent thermal stability (variation of W-rec < 15% over the temperature range of 20(similar to)140 degrees C) were simultaneously achieved in 0.77NN-0.23BT ceramics. More importantly, this work could bring out the development of a series of NN -based ceramics for electrical energy storage in the future such as NN-ABO(3) (A = Ca and Sr; B = Ti and Zr).
Improving the energy storage performances of Bi(Ni0.5Ti0.5)O3-added K0.5Na0.5NbO3-based ceramics

Xinmin Gan,Haibo Yang,Ying Lin,Jiacheng Li

DOI: https://doi.org/10.1016/j.ceramint.2022.02.237

IF: 5.532

2022-05-01

Ceramics International

Abstract:K0.5Na0.5NbO3 (KNN)-based ceramics are ideal alternatives to lead-containing ceramics because of their high maximum polarization and relatively large breakdown strength, however the low energy efficiency (η) remains a constraint on application. In this work, a novel (1-x)K0.5Na0.5NbO3-xBi(Ni0.5Ti0.5)O3 [(1-x)KNN-xBNiT] ceramics were designed and prepared using traditional solid state reaction method. An optimal recoverable energy storage density (W rec) of 2.61 J/cm3 accompanied by an ultrahigh η of 82.6% was simultaneously achieved in 0.85KNN-0.15BNiT ceramic under 280 kV/cm. Furthermore, a favorable temperature and frequency stability (the variation of W rec and < 3% over the range of 25–150 °C and 1–100 Hz) of energy storage performances (ESP) can be obtained. Meanwhile, 0.85KNN-0.15BNiT ceramic exhibits an outstanding power density (47.8 WM/cm3) and a fast discharge speed (t 0.9 = 46.9 ns) under 120 kV/cm. These results reflect that 0.85KNN-0.15BNiT ceramic is a deserved candidate for the application of high energy storage devices.

materials science, ceramics
A new strategy to realize high comprehensive energy storage properties in lead-free bulk ceramics

Ning Qu,Hongliang Du,Xihong Hao

DOI: https://doi.org/10.1039/C9TC02088H

IF: 6.4

2019-10-07

Journal of Materials Chemistry C

Abstract:Lead-free bulk ceramics have attracted increasing interest for electrical energy storage in pulsed power systems because of their superior mechanical properties, environmentally-friendliness, high power density and fast charge/discharge rate. Although considerable efforts have been made to design a large amount of lead-free bulk ceramics for energy storage applications, there still lack of a scientific and feasible guideline of how to explore new materials systems with large recoverable energy density (Wrec), high energy storage efficiency (η) and excellent thermal stabilty, which are the three key parameters for energy storage applications. In this work, a stategy (coexistence of nanodomains or polar nanoregions via composition optimization) was proposed to achieve high comprehensive energy storage properties in lead-free bulk ceramics. NaNbO3-Bi(Mg0.5Zr0.5)O3 ceramics were selected as an example to verify feasibility of this stategy. Encouragingly, both a high Wrec of 2.31 J cm-3 and a high η of 80.2 % were achieved in 0.93NaNbO3-0.07Bi(Mg0.5Zr0.5)O3 (0.93NN-0.07BMZ) ceramics under 255 kV cm-1, while keeping excellent thermal stability over 20 oC to 170 oC with the variation of Wrec<10 %, which are superior to other reported lead-free bulk ceramics. Compared with other lead-free bulk ceramics, 0.93NN-0.07BMZ ceramic is a promising material for high-temperature pulsed power capacitors. Most importantly, this work provide a significant guideline for exploring a series of new high-performance lead-free dielectric ceramics for next generation advanced pulsed power capacitors in the future.

materials science, multidisciplinary,physics, applied
Giant energy storage density, high efficiency and excellent stability achieved in lead-free KNN-based ceramic via a composition optimization strategy

R.H. Jin,Y.Q. Guo,Aditya Jain,L.N. Shi,Z.H. Ren,F.G. Chen,Y.G. Wang

DOI: https://doi.org/10.1016/j.materresbull.2024.113232

IF: 5.6

2024-12-01

Materials Research Bulletin

Abstract:The (1- x )K 0.5 Na 0.5 NbO 3 - x Bi(Zn 2/3 Sb 1/3 )O 3 ceramics, abbreviated as (1- x )KNN- x BZS with x values of 0.05, 0.10, 0.15, and 0.20, were prepared via solid-state reaction technique. Their structural and electrical characteristics, including dielectric and ferroelectric characteristics, were systematically examined. The achievement of an optimized phase transition-field and the broadening of the bandgap in the 0.85KNN-0.15BZS ceramics contribute to the delay of polarization and improvement in the breakdown field strength. Dielectric measurements indicate that the introduction of BZS disrupts the original large domain structure of KNN ceramics, giving rise to small domains and polar nano regions (PNRs). Specifically, the 0.85KNN-0.15BZS ceramic exhibits exceptional energy storage density ( W rec = 5.90 J/cm 3 ) and an ultra-high energy efficiency ( η = 79.9%) at an applied electric field of 570 kV/cm. Furthermore, this ceramic displays excellent frequency stability in the range of 1-100 Hz and temperature stability between 30-150 °C. The remarkable energy storage properties of (1- x )KNN- x BZS ceramics position them as highly promising materials for future pulse power capacitors and various energy storage applications.

materials science, multidisciplinary
Ultra-fast Charge-Discharge and High-Energy Storage Performance Realized in K0.5Na0.5NbO3-Bi(Mn0.5Ni0.5)O3 Ceramics

Xinru Nie,Yan He,Qiangqiang Shi,Yuqian Liang,Lingling Wei,Pengfei Liang,Xiaolian Chao,Guoxin Hu,Zupei Yang

DOI: https://doi.org/10.1142/s2010135x2242005x

2023-01-01

Journal of Advanced Dielectrics

Abstract:Lead-free relaxor ceramics (1 − [Formula: see text])K[Formula: see text]Na[Formula: see text]NbO3 − [Formula: see text]Bi(Mn[Formula: see text]Ni[Formula: see text])O3 ((1 − [Formula: see text] )KNN- [Formula: see text]BMN) with considerable charge–discharge characteristics and energy storage properties were prepared by a solid state method. Remarkable, a BMN doping level of 0.04, 0.96KNN–0.04BMN ceramic obtained good energy storage performance with acceptable energy storage density [Formula: see text][Formula: see text] of 1.826 J/cm3 and energy storage efficiency [Formula: see text] of 77.4%, as well as good frequency stability (1–500 Hz) and fatigue resistance (1–5000 cycles). Meanwhile, a satisfactory charge–discharge performance with power density [Formula: see text][Formula: see text] [Formula: see text] 98.90 MW/cm3, discharge time [Formula: see text][Formula: see text] < 70 ns and temperature stability (30–180∘C) was obtained in 0.96KNN–0.04BMN ceramic. The small grain size ([Formula: see text]150 nm) and the high polarizability of Bi[Formula: see text] are directly related to its good energy storage capacity. This work proposes a feasible approach for lead-free KNN-based ceramics to achieve high-energy storage and ultra-fast charge–discharge performance as well as candidate materials for the application of advanced high-temperature pulse capacitors.
A new family of high temperature stability and ultra-fast charge–discharge KNN-based lead-free ceramics

Zhanhui Peng,Qiangqiang Shi,Fudong Zhang,Jianfei Liu,Xinru Nie,Jitong Wang,Shudong Xu,Di Wu,Zupei Yang,Xiaolian Chao

DOI: https://doi.org/10.1007/s10853-022-07265-x

IF: 4.5

2022-05-13

Journal of Materials Science

Abstract:Dielectric ceramic capacitors have been widely used in pulse-power technology because of their good performance of high power density and fast discharge speed. A series of lead-free relaxor ceramics (1- x )K 0.5 Na 0.5 NbO 3 - x La(Mn 0.5 Ni 0.5 )O 3 (KNN- x LMN) featuring with considerable charge–discharge behavior and energy storage properties were designed and prepared in this work. The grain size of ceramics decreases to 180 ± 20 nm, and the dispersion coefficient is > 1.6, both of which are beneficial to obtain slender P-E loops and improve the energy storage performance in K 0.5 Na 0.5 NbO 3 ceramics upon La(Mn 0.5 Ni 0.5 )O 3 doping. Consequently, acceptable dielectric properties (maximum permittivity ε r of 1693, Δ ε/ε 100 °C ≤ ± 15% from 33 °C to 309 °C, minimum dielectric loss tan δ of 0.028, 50 kHz) and a high recoverable energy storage density ( W rec ~ 1.65 J/cm 3 ) accompanied by high energy storage efficiency ( η ~ 76%) were obtained simultaneously in 0.97KNN-0.03LMN ceramics. Meanwhile, 0.97KNN-0.03LMN composition exhibited satisfactory charge–discharge performance ( P D ~ 155 MW/cm 3 , t 0.9 ~ 55 ns) and temperature stability (30 ~ 110 °C). This work not only proposes an efficient strategy to realize high energy storage and ultra-fast charge–discharge performance in lead-free KNN based ceramics, but also provide an candidate material for application of advanced pulsed power capacitors.

materials science, multidisciplinary
A strategy for high performance of energy storage and transparency in KNN-based ferroelectric ceramics

Zhonghua Dai,Dingyan Li,Zhijian Zhou,Shun Zhou,Weiguo Liu,Jingjing Liu,Xi Wang,Xiaobing Ren

DOI: https://doi.org/10.1016/j.cej.2021.131959

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Lead-free transparent ferroelectric ceramics with superior energy storage properties are highly desirable for pulsed power technologies and the increased optical transparency demand. However, the transparency and energy storage density of lead-free bulk ceramics cannot meet the requirements of their wide applications due to the coarse microstructure and relatively low breakdown strength. In this study, a design strategy is proposed to optimize the energy storage characteristics and transparency of ceramics by introducing nanodomains, increasing the band gap energy and reducing the grain size. The results showed that submicmn grain (0.21 mu m) and large band gap energy (E-g = 3.21 eV) were achieved through the introduction of the second component Sr (Sc0.5Nb0.5)O-3 (SSN). An excellent transparency of up to 84.5% in the near-infrared region (1378 nm), a high energy density (W) of similar to 4.42 J.cm(-3) and an extremely small strain of similar to 0.022% were simultaneously achieved in the 0.825(K0.5Na0.5)NbO3-0.175Sr(Sc0.5Nb0.5)O-3 (0.825KNN-0.17555N) ceramics. These results revealed the potential applications of (K0.5Na0.5)NbO3-based ceramics for energy storage and provide a feasible approach of domain engineering to develop new lead-free energy storage transparency materials.
Significantly enhanced energy storage density and efficiency of lead-free K0.5Na0.5NbO3-based relaxor ferroelectric ceramics

Zhen Han,Lei Guo,Chen Zhang,Qing Yan,Yan-Jun Liu

DOI: https://doi.org/10.1007/s10854-024-12082-w

2024-02-23

Journal of Materials Science Materials in Electronics

Abstract:The development of dielectric ceramics for energy storage has received great research attention due to high power density and extremely high charge–discharge speed in recent years. Herein, the lead-free (1-x)(0.92K 0.5 Na 0.5 NbO 3 -0.08Sr 0.7 Bi 0.2 TiO 3 )-xBi(Zn 0.5 Zr 0.5 )O 3 [(1-x)(0.92KNN-0.08SBT)-xBZZ] ceramics were prepared. The enhanced energy storage performance in the x = 0.15 sample, with large recoverable energy storage density ( W rec ) of 3.35 J/cm 3 and high energy efficiency ( η ) of 81.9%, which can export satisfactory in temperatures (25–150 °C) and frequencies (1–100 Hz). It is revealed that the introduction of BZZ can enhance relaxor behaviors and decrease grain size, which are supported by the dielectric tunability, polarization hysteresis, and microstructure. Also, a superfast discharge speed ( t 0.9 = 27.2 ns) and a high power density ( P D = 26.04 WM/cm 3 ), with minimal fluctuation of ≤ 5.6%, are examined ranging from 20 °C to 120 °C. These characteristics render 0.85(0.92KNN-0.08SBT)-0.15BZZ ceramic promising candidate for high power energy storage applications.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied

Significantly Enhanced Recoverable Energy Storage Density in Potassium–sodium Niobate-Based Lead Free Ceramics

Potassium–sodium Niobate Based Lead-Free Ceramics: Novel Electrical Energy Storage Materials

Significant Increase in Comprehensive Energy Storage Performance of Potassium Sodium Niobate-Based Ceramics Via Synergistic Optimization Strategy

Significantly Improved Energy Storage Performances of K0.5Na0.5NbO3 Lead-Free Ceramics Via Composition Optimization Strategy

Lead-free KNN-based Ceramics Incorporated with Bi(Zn2/3Nb1/3)O3 Possessing Excellent Optical Transmittance and Superior Energy Storage Density

Energy Storage Performance of K0.5Na0.5NbO3-based Ceramics Modified by Bi(Zn2/3(Nb0.85Ta0.15)1/3)O3

Enhancement of Recoverable Energy Density and Efficiency of K0.5Na0.5NbO3 Ceramic Modified by Bi(Mg0.5Zr0.5)O3

Giant energy storage efficiency and high recoverable energy storage density achieved in K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-Bi(Zn<sub>0.5</sub>Zr<sub>0.5</sub>)O<sub>3</sub> ceramics

Achieving outstanding temperature stability in KNN-based lead-free ceramics for energy storage behavior

Realizing High Comprehensive Energy Storage and Ultrahigh Hardness in Lead-Free Ceramics

Giant energy storage efficiency and high recoverable energy storage density achieved in K0.5Na0.5NbO3-Bi(Zn0.5Zr0.5)O3 ceramics

Significantly Improved Energy Storage Performances of K0.5Na0.5NbO3 Lead-Free Ceramics Via a Composition Optimization Strategy

Superior Energy Storage Properties with Prominent Thermal Stability in Lead-Free KNN-based Ceramics Through Multi-Component Optimization Strategy

A New Family of Sodium Niobate-Based Dielectrics for Electrical Energy Storage Applications

Improving the energy storage performances of Bi(Ni0.5Ti0.5)O3-added K0.5Na0.5NbO3-based ceramics

A new strategy to realize high comprehensive energy storage properties in lead-free bulk ceramics

Giant energy storage density, high efficiency and excellent stability achieved in lead-free KNN-based ceramic via a composition optimization strategy

Ultra-fast Charge-Discharge and High-Energy Storage Performance Realized in K0.5Na0.5NbO3-Bi(Mn0.5Ni0.5)O3 Ceramics

A new family of high temperature stability and ultra-fast charge–discharge KNN-based lead-free ceramics

A strategy for high performance of energy storage and transparency in KNN-based ferroelectric ceramics

Significantly enhanced energy storage density and efficiency of lead-free K0.5Na0.5NbO3-based relaxor ferroelectric ceramics