Abstract:Conventional proton-exchange membrane (PEM) water electrolysers use much thicker membranes (>175 μm) than their PEM fuel cell counterparts (<25 μm), which reduces hydrogen crossover but also reduces electrolyzer efficiency due to the increased Ohmic resistance 1 . Reduction of hydrogen crossover is critical in conventional systems to avoid buildup of hydrogen in the anode above the lower explosive limit. Due to the use of liquid water at the anode in conventional systems, the anode cannot be flushed with air or an inert gas to reduce the hydrogen concentration. If the liquid water supply is moved to the cathode, the anode can be easily purged with air, reducing the safety concern related to hydrogen crossover. Proof-of-concept experiments 2 have demonstrated the viability of this approach, but many open questions remain regarding the interplay between water transport, water consumption, membrane hydration, and cell performance, as well as understanding what components and properties are most important in improving the efficiency of such a device. In this work, a framework for modelling of PEM electrolysis cells will be outlined, with special attention to wet and dry anode conditions. The model will be used to provide guidance for optimizing system performance while contributing to understanding of local processes inside an electrolysis cell such as water transport, heat generation, reaction distribution, and bubble formation. We study the impact of various design and operational choices, such as membrane thicknesses, PTL structure, air feed humidity, and differential pressure operation, on the rate of water transport from cathode to anode and on overall cell polarization performance. Using these results, we provide design recommendations for PEM electrolysers with liquid-fed cathodes. Finally, progress towards an open-source implementation of this model will be discussed. This work has been performed within the HOPE (Revolutionizing Green H ydr o gen P roduction with Next Generation PEM Water E lectrolyser Electrodes) and HYSTACK (Low cost, high efficiency PEM electrolyser stack) projects financially supported by the Research Council of Norway under project numbers 325873 and 321466, respectively. Ayers, K. et al. Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale. Annu. Rev. Chem. Biomol. Eng. 10 , 219–239 (2019). Barnett, A. O. & Thomassen, M. S. Method for producing hydrogen in a PEM water electrolyser system, PEM water electrolyser cell, stack and system. Patent No.: WO 2019/009732. EP3649276B1. US11408081B2.

Modellierung, Simulation Und Implementierung Von Zellen Für Die Solargetriebene Wasserspaltung

Modeling, Simulation, and Implementation of Solar‐Driven Water‐Splitting Devices

Modeling/Simulation and Prototyping Development of Solar-Hydrogen Generators

A single-phase, non-isothermal model for PEM fuel cells

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Modeling Validation and Simulation of an Anode Supported Sofc Including Mass and Heat Transport, Fluid Flow and Chemical Reactions

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

A Stabilized, Intrinsically Safe, 10% Efficient, Solar‐Driven Water‐Splitting Cell Incorporating Earth‐Abundant Electrocatalysts with Steady‐State Ph Gradients and Product Separation Enabled by a Bipolar Membrane

Three-Dimensional CFD Simulation of a Proton Exchange Membrane Electrolysis Cell

Design and Thermo-Environmental Analysis of a Novel Solar-Driven System Integrating Desalination, Photocatalytic Water Splitting, and Fuel Cell Technologies

Large-scale three-dimensional simulation of proton exchange membrane fuel cell considering detailed water transition mechanism

Integration of Multijunction Absorbers and Catalysts for Efficient Solar‐Driven Artificial Leaf Structures: A Physical and Materials Science Perspective

A Scalable and Robust Water Management Strategy for PEMFCs: Operando Electrothermal Mapping and Neutron Imaging Study

Modelling of a Proton-Exchange Membrane Electrolysis Cell with Liquid-Fed Cathode

Modulierung Der Elektronischen Strukturen Anorganischer Nanomaterialien Für Eine Effiziente Elektrokatalytische Wasserspaltung

Aspects of Reduced Performance of Proton-Exchange-Membrane Water Electrolysis Via Continuum Modeling

Customized Microenvironments Spontaneously Facilitate Coupled Engineering of Real‐life Large‐Scale Clean Water Capture and Pollution Remediation

Modeling of a Novel Cathode Flow Field Design with Optimized Sub-Channels to Improve Drainage for Proton Exchange Membrane Fuel Cells

A Low-Cost and High-Efficiency Integrated Device toward Solar-Driven Water Splitting.

Simulation an effective light trapping structure for boosting photoelectrocatalytic water splitting

Surface-Attached Molecular Catalysts on Visible-Light-Absorbing Semiconductors: Opportunities and Challenges for a Stable Hybrid Water-Splitting Photoanode