Abstract:Purpose This study aims to use an additive process for the first time to develop a microfluidic device that uses centrifugal technique for precise and repeatable generation of microdroplets. Droplets have versatile applications in life sciences, but so far centrifugal devices for their production have been made mainly using standard subtractive techniques. This study focused on evaluating the applicability of 3D printing technology in the development of centrifugal microfluidic devices and investigating their properties and future applications. Design/methodology/approach First, the background of this interdisciplinary research, including the principle of droplet microfluidics and the centrifugal technique, is explained. The developed device has the form of a disc (similar to an audio CD), containing an integrated microfluidic system for droplet generation. The disc is rotated at a specific spin profile to induce controlled liquid flow and accurate production of oil-in-water microdroplets. The device was fabricated using material jetting technology. The design, operation principles, printing process parameters and post-processing steps are explained in detail. Findings The device was thoroughly characterised, including its mechanical properties, the impact of chemical treatment and the flow measurement of the liquids. The study confirms that the disc can be applied to produce various emulsions using centrifugal force alone. 3D printing technology enables potential mass production and other applications of the device. Originality/value The 3D printing process allowed for easy design, fabrication and duplication of the device. Compared to standard PMMA discs, a simpler fabrication protocol and a more flexible and monolithic structure were obtained. The device can be adapted to other microfluidic processes in a lab with high potential for point-of-care applications.

Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

A simple and low-cost fully 3D-printed non-planar emulsion generator

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Three-Dimensional Printed Devices in Droplet Microfluidics

A 3D-Printed Standardized Modular Microfluidic System for Droplet Generation

A 3D printed size-tunable flow-focusing droplet microdevice to produce cell-laden hydrogel microspheres

Simple and Reusable Off-The-Shelf Microfluidic Devices for the Versatile Generation of Droplets

A Versatile Microchannel Array Device for Portable and Parallel Droplet Generation

Experimental validation of a simple, low-cost, T-junction droplet generator fabricated through 3D printing

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

A 3D printed microfluidic device for centrifugal droplet generation

Picoliter Droplet Generation and Dense Bead-in-Droplet Encapsulation via Microfluidic Devices Fabricated via 3D Printed Molds

A Capillary-Assembled Micro-Device for Monodispersed Small Bubble and Droplet Generation

A Monolithic 3D Printed Axisymmetric Co-Flow Single and Compound Emulsion Generator

An Injection-Mold Based Method with a Nested Device for Microdroplet Generation by Centrifugation

A Portable, Negative-Pressure Actuated, Dynamically Tunable Microfluidic Droplet Generator

3D Printing in Microfluidics: Experimental Optimization of Droplet Size and Generation Time through Flow Focusing, Phase, and Geometry Variation

Simple and Inexpensive Microfluidic Devices for the Generation of Monodisperse Multiple Emulsions

Microfluidic-Assisted Pneumatic Droplet Generators Designed for Multiscenario Biomanufacturing with Favorable Biocompatibility and Extendibility

Investigating Mixing Efficiency in Droplets: A Comprehensive Study of Numerical Modeling and Experimental Testing in 3D-Printed Microfluidic Devices