Abstract:The study focuses on the synthesis of nanocomposites CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) using a hybrid chemical coprecipitation and sol–gel method. Validation of composite formation, incorporating distinct spinel and perovskite phases, is achieved through Fourier‐transform infrared spectroscopy. From X‐ray diffraction spectra, it can be concluded that average crystalline size calculated from Debye–Scherer and Williamson–Hall method increases on increasing the Sr substitution. Furthermore, the % crystallinity increases on increasing the Sr substitution. The scanning electron microscope analysis confirms the intricate 3D morphology observed in the composites. The electrocatalytic performance of these materials in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) is evaluated. Notably, CoFe2O4–La0.2Sr0.8 CoO3 exhibits remarkable electrocatalytic activity, achieving current densities of j = 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at E = 650 mV. This underscores its potential as a catalyst for sustainable energy conversion processes. Overall, these findings highlight the promising application of spinel‐boosted perovskite composites in enhancing the efficiency of critical electrochemical reactions. CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) composites have been synthesized using a two‐step, low‐temperature wet chemical approach that combines coprecipitation and sol–gel techniques. The composite materials have been physicochemically analyzed using Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscope. The electrocatalytic properties of the composite materials have been assessed in terms of their performance in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. Cyclic voltammetry has been used for analyzing the redox behavior of the materials in 1 M KOH solution. The electrocatalytic activity of the materials has been assessed using anodic polarization curves on Ni substrate and the CoFe2O4–La0.2Sr0.8CoO3 film electrode demonstrates excellent activity, with current densities of 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at 650 mV. Also, the CoFe2O4–La0.2Sr0.8CoO3 film electrode has the maximum specific activity of 1.1 × 103 mA cm−2 g−1 at 650 mV toward OER. The electrodes' stability has been assessed through chronoamperometric experiments and additional insight into the enhancement of electrocatalytic activity gained through the electrochemical surface area estimations using electrochemical impedance spectroscopy. From chronoamperometric experiment, it has been observed that the CoFe2O4–La0.2Sr0.8CoO3 film electrode attains stability within 114 s with a current density of 108.7 mA cm−2. Furthermore, the thermodynamic parameters, including the standard enthalpy of activation (ΔH°#), standard entropy of activation (ΔS°#), and standard electrochemical energy of activation (ΔHel°# ), have been estimated by anodic polarization curve recorded in KOH as well as KOH with CH3OH solutions at various temperatures.

Effect of Morphology on the Oxygen Evolution Reaction for La0.8Sr0.2Co0.2Fe0.8O3−δelectrochemical Catalyst in Alkaline Media

Systematic Study of Oxygen Evolution Activity and Stability on La1–xSrxFeO3−δ Perovskite Electrocatalysts in Alkaline Media

Self-Supported Low-Crystallinity Cofe Layered Double Hydroxide Nanospheres on Monolayer Ti3c2 Electrode for Oxygen Evolution Reaction

Perovskite Sr0.9Y0.1CoO3-delta Nanorods Modified with CoO Nanoparticles as a Bifunctional Catalyst for Rechargeable Li-O-2 Batteries

Corrosion-Engineered Morphology and Crystal Structure Regulation toward Fe-Based Efficient Oxygen Evolution Electrodes

Engineering Phosphorus-Doped LaFeO3-δ Perovskite Oxide As Robust Bifunctional Oxygen Electrocatalysts in Alkaline Solutions

One-Dimensional La0.2Sr0.8Cu0.4Co0.6O3−δ Nanostructures for Efficient Oxygen Evolution Reaction

Boosting the Electrocatalytic Oxygen Evolution of Perovskite LaCo1- x Fex O3 by the Construction of Yolk-Shell Nanostructures and Electronic Modulation

Morphology, Crystal Structure And Electronic State One-Step Co-Tuning Strategy Towards Developing Superior Perovskite Electrocatalysts For Water Oxidation

Optimizing the Electronic Structures of Ca Sr1-Co0.7Fe0.3O3-δ Anodes for High-Temperature Oxygen Evolution Reaction

Modulating Built‐In Electronic Configuration via Variable Al Doping for Robust Oxygen Evolution Reaction

Tailoring Spinel with Perovskite: Sr Substitution in the Perovskite Phase of CoFe2O4–LaCoO3 Nanocomposite for Oxygen Evolution and Methanol Oxidation in Alkaline Medium

Improving the Electrocatalytic Activity and Durability of the La0.6Sr0.4Co0.2Fe0.8O3-delta Cathode by Surface Modification

A Doping‐Induced SrCo 0.4 Fe 0.6 O 3 /CoFe 2 O 4 Nanocomposite for Efficient Oxygen Evolution in Alkaline Media

Optimizing the electronic structures of CaXSr1-XCo0.7Fe0.3O3-8 anodes for high-temperature oxygen evolution reaction

Electronic Structure Engineering of LiCoO2 Toward Enhanced Oxygen Electrocatalysis

Constructing Spin Pathways in LaCoO3 by Mn Substitution to Promote Oxygen Evolution Reaction

La0.8Sr0.2Mn0.8Co0.2O3-δ perovskite as an efficient functional electrocatalyst for oxygen reduction reactions

Aluminum-Tailored Energy Level and Morphology of Co3- x Alx O4 Porous Nanosheets toward Highly Efficient Electrocatalysts for Water Oxidation

Enhancement of the electrochemical properties for La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen electrode by the addition of CaxCo4O9+δ nano-catalysts

PHYSICALCHEMICAL AND ELECTROCHEMICAL PROPERTIES OF La_(1-x)Sr_xCoO_3 PEROVSKITE OXIDE ELECTRODES FOR OXYGEN EVOLUTION