Abstract:Modified asphalt binders are still considered important in asphalt pavement. However, the comprehensive use of various modifiers is limited due to storage stability issues. Moreover, there is a scarcity of detailed analyses regarding the degree of separation for asphalt binders among each method despite the utilization of various methods to assess the storage stability of binders. Therefore, a comprehensive analysis was conducted to assess the storage stability of asphalt binder modified with a crumb rubber modifier (CRM) and styrene–isoprene–styrene (SIS), utilizing five evaluation factors following the ASTM D7173 guidelines based on four mixing methods (A: high-shear mixing method, B: low-speed agitating method, C: high-shear mixing method + low mixing method, D: low-speed agitating method + low mixing method). To produce the modified asphalt binder, the proportions of the CRM were 5% and 10% for each binder, and 10% SIS was added to all binders. The results in this study convey that (1) the addition of the modifier led to an increase in G*/sin δ with different mixing methods, but using mixing methods (C and D) for a relatively long time resulted in a lower G*/sin δ, indicating suboptimal performance; (2) through the multiple stress creep recovery (MSCR), rheological properties of Jnr and % rec exhibited trends similar to G*/sin δ evaluation, highlighting an improved elastic recovery with a higher modifier content; (3) storage stability assessment revealed consistent trends in high-shear mixing groups (A and C), while low-speed mixing groups (B and D) exhibited an elevated separation index (SI), suggesting a sensitivity to modification conditions; (4) evaluation using the MSCR method indicated that % rec with a 3.2 kPa load is effective for the sensitive assessment of binder storage stability and Jnr showed a limited sensitivity across varying loads, advocating for % rec for precise evaluation; and (5) despite permitting various tests, achieving consistent results remains challenging. Future research should explore diverse modifiers and optimal evaluation methods to enhance knowledge of binder behavior and separation dynamics.

Investigation of Gilsonite-, Polyphosphoric Acid- and Styrene–butadiene–styrene-Modified Asphalt Binder Using the Multiple Stress Creep and Recovery Test

Evaluation of Test Methods for Fracture Resistance of High Modulus Asphalt Binders from Rheological and Mechanical Perspectives

Nonlinear Viscoelastoplastic Kinetics for High-Temperature Performance of Modified Asphalt Binders

Rheological Behavior of High Modulus Asphalt Binder and Its Indication for Fracture Performances

Research on High- and Low-Temperature Rheological Properties of High-Viscosity Modified Asphalt Binder

Evaluation of Rheological and Aging Behavior of Modified Asphalt Based on Activation Energy of Viscous Flow

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Characterization of Recovery in Asphalt Binders.

Multiple Stress Creep Recovery (MSCR) Test for Determination of Waste Engine Oil Modified Asphalt Binder as Pavement Material

High-Temperature Rheological Characteristics of Asphalt Binder Incorporated with Graphene Oxide and Predicting Its Rutting Potential Using Response Surface Method

A Comparative Study for Creep and Recovery Behavior Characterization of Modified Bitumens Using the MSCR Test

Mechanistic-empirical evaluation of specific polymer-modified asphalt binders effect on the rheological performance

Laboratory Evaluation of Storage Stability for Asphalt Binder Modified with Crumb Rubber and Styrene–Isoprene–Styrene Depending on Evaluation Factors and Blending Condition

Evaluation of Performance on Crumb-Rubber-Modified Asphalt Mixture

Comparison of Rheological Properties and Hot Storage Characteristics of Asphalt Binders Modified with Devulcanized Ground Tire Rubber and Other Modifiers

Improving the high-temperature performance of cold recycled mixtures by polymer-modified asphalt emulsion

Mechanistic Fatigue Performance Evaluation of Stone Mastic Asphalt Mixtures: Effect of Asphalt Performance Grade and Elastic Recovery

Effect of filler in asphalt mastic on rheological behaviour and susceptibility to rutting

Evaluation of Rheological and Microscopic Properties of SBS-Modified Asphalt Binder with Multiple Regeneration

Analysis of Rheological Properties and Regeneration Mechanism of Recycled Styrene–Butadiene–Styrene Block Copolymer (SBS) Modified Asphalt Binder Using Different Rejuvenators

Evaluation Of Physical-Rheological Properties of Nano Titanium Dioxide Modified Asphalt Binder and Rutting Resistance of Modified Mixture