Thermal Shock Damage and Failure Mechanism of 2D Laminated SiC/SiC with Barium‐Strontium Aluminosilicate‐Based Environmental Barrier Coating
Xinxin Cao,Jianzhang Li,Guifang Han,Yulei Wang,Ziqi Zhang,Xingang Luan,Zhiliang Hong,Aijun Li,Laifei Cheng
DOI: https://doi.org/10.1002/adem.202401878
IF: 3.6
2024-12-03
Advanced Engineering Materials
Abstract:The thermal shock damage behavior of SiC/SiC‐EBC is systematically investigated. Coating cracking or even peeling occurs due to thermal stress mismatch, which acts as channels for oxygen, leading to oxidative damage of Si coatings and partial SiC/SiC substrate. However, delamination within SiC/SiC substrate is the main cause of SiC/SiC‐EBC failure. Thermal shock damage is a key issue for the stable service of SiC/SiC with environmental barrier coating (EBC) in aero‐engines. The thermal shock damage behavior of SiC/SiC with barium‐strontium aluminosilicate (BSAS)‐based EBC in an air atmosphere quenched by air and water media between RT and 1200 °C is systematically investigated. After 600 thermal shock cycles, cracks form in the EBC due to a sharp increase in the internal thermal stresses, and a SiO2 TGO layer is formed on the Si bonding coat. Based on the TGO thickness, damage within BSAS/mullite coatings is quantified by the oxygen permeability (2.541 × 10−11 mol·(atm cm s)−1), which is increased by 2.5 times compared to static oxidation. Despite cracking damage occurring in the SiC matrix of SiC/SiC substrates, the load‐bearing capability of SiC fibers is improved due to the modulus matching of the fiber/matrix. Oxidation damage is dominated the degradation of the performance of SiC/SiC substrates, whose flexural strength is decreased by 15% after 600 cycles. In the thermal shock test quenched by water media, the strength retention of SiC/SiC‐EBC is below 60%, and an increase in internal defects and even delamination of the SiC/SiC substrate are the main reasons for the thermal shock failure of SiC/SiC‐EBC.
materials science, multidisciplinary