Abstract:The dynamic response experiment has been a difficult point of the metal/polymer interfacial bonding performance testing, in which the metal surface state and the loading condition are key independent variables that should be comprehensively investigated. This work investigates the effect of loading velocity and Al surface porosity on Al/PMMA interfacial dynamic shear bonding performance. Firstly, simulation is applied to predict dynamic response variation trends. Simulation results show that the maximum force (MF) has minor changes with initial bullet velocity (IBV), while the de-bonding displacement (DD) and interface failure work (IFW) decrease obviously with IBV. All three indicators increase smoothly with the area ratio of PMMA interlocks. In experiment, the result plots of the indicators are all discrete, but as a whole, the MF plots could not be distinguished by the variation of IBV, while the plots of DD and NW decrease with IBV, which are consistent with simulation. The dynamic response indicators obtained by simulation and experiment show similar variation trends with their respective independent variables at certain ranges (surface porosity: − 15–20%/dm 2 , area ratio: 0–0.33) and could be contrasted to evaluate the indicator value differences at full range. By further analysis within MF and DD indicators, the stability of the dynamic interfacial stiffness is discovered at their respective loading velocities, which is similar static loading in past work. The strengthening and weakening mechanisms of Al/PMMA interface are also inferred. This experiment–simulation combined work exhibits a systematic method to predict the dynamic response with the variation of the independent investigating variables at certain ranges, to evaluate the degree of deviation of the experimental plots from simulative ones and to help determine the porosity range where higher dynamic response would be obtained, which would be also applied to other metal/polymer layered system.

Experimental Investigation on Yield Behavior of PMMA under Combined Shear–compression Loading

Shear-compression failure behavior of PMMA at different loading rates

Mechanical Properties of Polymer Nanocomposites with Randomly Dispersed and Cross-Linked Two-Dimensional Diamond

A Molecular Study on the Reinforcement of Polymethylene Elastomers

Weibull Statistical Analysis on Tensile Strength of Adhesive Joint in PMMA

Experimental Investigation and Modeling of the Mechanical Properties of Construction PMMA at Different Temperatures

EXPERIMENTAL STUDY ON FRACTURE BEHAVIOR OF PMMA UNDER MIXED-MODE LOADING

Experimental Study of Yield Surface in Polypropylene Considering Rate Effect: Stress Path Dependence

Experimental Investigation of Dynamic Fracture Behaviors of Polymethyl Methacrylate

Simulative and experimental study of metal/polymer interfacial dynamic shear response

Comparison Among Three Different Approaches to Dynamic Damage Measurement for Polymer Blends

Characterization and modeling of the uniaxial thermo-mechanical compressive behavior of polymethacrylimide (PMI) foam at different temperatures

Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam

Experimental Study of Size Dependence of Fracture Toughness of PMMA

Compressive Mechanical Behavior and Corresponding Failure Mechanism of Polymethacrylimide Foam Induced by Thermo-Mechanical Coupling

Semi-Crystalline Polymers Applied to Taylor Impact Test: Constitutive, Experimental and FEM Analysis

The experimental and numerical investigation of fracture behaviour in PMMA notched specimens under biaxial loading conditions – Tension with torsion

Determining the constitutive behavior of nonlinear visco-elastic-plastic PMMA thin films using nanoindentation and finite element simulation

A Coherent Assessment of the Compressive Strain Rate Response of PC, PETG, PMMA, and TPU Thermoplastics in MEX Additive Manufacturing

A constitutive model for poly-methyl-methacrylate over a wide range of strain rates and temperatures

Fatigue crack growth properties of PMMA material used in underwater transparent structures