Abstract:A multi-wavelength switchable C-band erbium-doped fiber laser based on a hybrid comb filter composed of a Sagnac loop and Mach–Zehnder interferometer (MZI) is designed and experimentally demonstrated. In the designed ring cavity fiber laser, the MZI is composed of bi-tapered single-mode fiber fabricated by etching with hydrofluoric acid. In the experiment, the wavelength intervals in the comb spectra of the Sagnac loop and MZI are 3.4 and 18.8 nm, respectively, and by combining the Sagnac loop and MZI, measurements of the hybrid comb spectrum are obtained. When the pump power is 91 mW, lasing occurs at 1529.2 nm. Adjustment of the variable attenuator (VA) can provide 1541.9 and 1558.6 nm single-wavelength switchable lasers, for which the maximum peak power difference is less than 3.59 dB, the signal-to-noise ratio (SNR) exceeds 19.25 dB, and the peak power fluctuation is less than 0.34 dB over a 30 min scan time at 26 °C. For dual-wavelength switchable laser emission, four different sets of wavelengths can be realized, and the SNR exceeds 15.57 dB with power fluctuations of less than 1.6 dB, under the same monitoring conditions. By further adjusting the VA, stable and tunable triple-wavelength lasing is also realizable; under these conditions, the SNR exceeds 15.02 dB and the power fluctuation is less than 0.91 dB. Furthermore, four- and five-wavelength lasing can also be achieved by adjusting the VA again, with SNRs exceeding 19.05 and 14.98 dB, respectively.

Multiwavelength Tunable Erbium‐doped Fiber Laser Based on Fabry–Perot Filter and Mach–Zenhder Interferometer

Tunable and switchable multi-wavelength erbium-doped fiber ring laser based on a modified dual-pass Mach-Zehnder interferometer

Multi-wavelength switchable erbium-doped fiber laser based on a hybrid filter incorporating a bi-tapered Mach–Zehnder interferometer and Sagnac loop

A Tunable Narrow-Line-width Multi-Wavelength Er-doped Fiber Laser Based on a High Birefringence Fiber Ring Mirror and an Auto-Tracking Filter

Wavelength-spacing continuously tunable multiwavelength erbium-doped fibre laser based on DSF and MZI

Tunable Erbium-Doped Fiber Ring Laser Based on an All-Fiber Filter

Tunable Multiwavelength Fiber Laser Based on a Θ-Shaped Microfiber Filter

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Nonlinear Optical Loop Mirror and Birefringence Fiber Filter

Channel-spacing Tunable Multiwavelength Erbium-Doped Fiber Laser Based on a Microfiber Fabry-Perot Filter

Tunable Multiwavelength Er-Doped Fiber Laser with a Two-Stage Lyot Filter

Tunable Multiwavelength Erbium-Doped Fiber Laser with A Polarization-Maintaining Photonic Crystal Fiber Sagnac Loop Filter

Multiwavelength Erbium-Doped Fiber Laser Based on an All-Fiber Polarization Interference Filter

Multiwavelength Erbium-Doped Fiber Laser Based on Inhomogeneous Loss Mechanism by Use of a Highly Nonlinear Fiber and a Fabry-Perot Filter

Multifunctional tunable multiwavelength erbium-doped fiber laser based on tunable comb filter and intensity-dependent loss modulation

Multiwavelength Generation in an Erbium-Doped Fiber Laser Using a Fabry-Perot Filter

Tunable Dual-Wavelength Er3+-doped Fibre Laser Based on a Single Multimode Interference Filter

Tunable and Switchable Six-Wavelength Erbium-Doped Fiber Ring Laser

Multiwavelength Switchable Fiber Laser Employing a DMD As Tuning Element and Variable Optical Attenuator

Tunable multiwavelength Brillouin–Erbium fiber laser by controlling self-lasing cavity modes’ oscillation

Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Intensity-Dependent Loss and Intra-Cavity Loss Modulation