Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Room-Temperature Switchable Triple-Wavelength Operation Of An Erbium-Doped Fiber Laser

Multifrequency Erbium-Doped Fiber Laser Operating at Room Temperature

Switchable Quadruple-Wavelength Erbium-Doped Photonic Crystal Fiber Laser Based on a Polarization-Maintaining Photonic Crystal Fiber Sagnac Loop Filter

Switchable Multiwavelength Erbium-Doped Fiber Laser with Cascaded Fiber Bragg Gratings and Dual-Section Lyot–Sagnac Filter

Multi-wavelength switchable erbium-doped fiber laser based on a hybrid filter incorporating a bi-tapered Mach–Zehnder interferometer and Sagnac loop

A 100 Mw-Level Single-Mode Switchable Dual-Wavelength Erbium-Doped Fiber Laser

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

Triple-wavelength Switchable Erbium Doped Fiber Laser with Cascaded Asymmetric Exposure Long-Period Fiber Gratings.

Tunable and Switchable Six-Wavelength Erbium-Doped Fiber Ring Laser

Tunable and switchable dual-wavelength Er-doped fiber ring laser using ASEs

A novel-configuration multi-wavelength Brillouin erbium fiber laser and its application in switchable high-frequency microwave generation

Tunable and Switchable Low-Threshold Multi-Wavelength Erbium-Doped Fiber Pulsed Laser Based on Lyot Filter and NOLM

Switchable multi-wavelength fiber laser based on a taper-coupled microbottle resonator

Four-wavelength-switchable SLM fiber laser with sub-kHz linewidth using superimposed high-birefringence FBG and dual-coupler ring based compound-cavity filter

Tunable and switchable multi-wavelength erbium-doped fiber ring laser based on a modified dual-pass Mach-Zehnder interferometer

Multiwavelength Erbium-Doped Fiber Laser Based on Intensity-Dependent Transmission in a Linear Cavity

Multiwavelength Erbium-Doped Fiber Laser Based on Inhomogeneous Loss Mechanism by Use of a Highly Nonlinear Fiber and a Fabry-Perot Filter

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

Individually Switchable and Widely Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Cascaded Mismatching Long-Period Fiber Gratings

Multi-wavelength Lasing Oscillation Based on Polarization Hole Burning Effect in an Erbium-doped Fiber Laser