The latest development of pervaporation separating membranes for xylene isomers

王丽娜,钱锦文,陈欢林

DOI: https://doi.org/10.3969/j.issn.1007-8924.2003.03.013

2003-01-01

Abstract:The study on the pervaporation membranes for separating xylene isomers in the last several decades has been summarized.Moreover,the latest developments and the prospect have been advanced in the paper.

What problem does this paper attempt to address?

A study on separation of organics by pervaporation

高从堦,蔡邦肖,陈欢林,钱锦文

DOI: https://doi.org/10.3969/j.issn.1007-8924.2003.04.001

2003-01-01

Abstract:A few membranes for separation of organics were prepared by different methods,such as composite membranes of CA/PAN,PVA/PAN & PVA/CA,CTA hollow fiber,and blended polymer composite CA/PVB,& CA/MMA-AA,as well as PVA membrane with metal ion carriers.The membranes are asymmetric or composite.The sorption characteristics of the membrane materials (CA & PVA-Men+) was measured and membrane separation performance was examined.The results show that CA & CTA membranes and composite membranes are suitable for the separation of MTBE/MeOH,and the modified solution-diffusion model can successfully predict the performance of PV separation of MTBE/MeOH through CA membranes.PVA membrane with metal ion carriers may be a good candidate for the separation of benzene/cyclohexane from preliminary sorption experiment.
Progress of Membrane Separation for Xylene Isomers

LIU Nengjun,ZHANG Lin,CAI Rongxi,ZHOU Zhijun,CHEN Huanlin

DOI: https://doi.org/10.3321/j.issn:1000-6613.2007.06.009

2007-01-01

Abstract:The study on the inorganic zeolite and organic polymer membranes for separating xylene isomers in recent years is reviewed,and the merits and demerits of various types of membranes are presented.Based on comparing these membranes,the prospect of membrane separation for xylene isomers is presented.
Research Progress of Separation Mechanism and the Affecting Factors of Pervaporation Through Zeolite Membrane

SU Xiao-hui,LI Gang,YU Lin,YI Guo-bin,WU Qing-qing,HU Guang-hui

DOI: https://doi.org/10.3969/j.issn.0258-3283.2012.04.011

2012-01-01

Abstract:In recent years,use of zeolite membranes as an alternative for pervaporation has attracted considerable attention.In this work,the fundamentals and the affecting factors of separations by pervaporation through zeolite membranes were reviewed.Two kinds of separation mechanism are discussed:the selective adsorption and molecular sieve separation principle.The main factors include:The surface properties of zeolite membranes;Non-zeolite pores;Operating temperature;Concentration of feed;Concentration polarization,and so on.
Comprehensive Analysis on Anomalous Phenomenon of Ethanol-Soluble PVB Membrane for Ethanol Recovery Via Pervaporation

Junjun Li,Mi Huang,Ping Wei,Yaqin Zhang,Xuean Zhao,Chunbo Liu,Zhijun Zhou,Lin Zhang

DOI: https://doi.org/10.1002/aic.17560

IF: 4.167

2022-01-01

AIChE Journal

Abstract:Poly(vinyl butyral) is selected as a promising ethanol-permselective membrane based the solubility parameter theory, however it exhibits anomalous water perm-selectivity in practical pervaporation process. Comprehensive analysis based on experimental and theoretical methods were carried out to explore the inherent mechanism of the anomalous performance. Firstly, sum frequency generation vibrational spectra and contact angle were developed to quantify the surface reconstruction of membrane in air and ethanol, which indicated that hydrophilic hydroxyl tended to expose on membrane surface with ethanol thus improved the membrane affinity to water. Meanwhile, swelling behaviors proved more water would accumulate in the ethanol swollen membrane. Furthermore, theoretical analysis in terms of sorption and diffusion process, based on the UNIFAC-FV model and Fujita free volume theory, confirmed the mechanism of anomalous phenomenon of poly(vinyl butyral) membrane. The comprehensive investigation was expected to provide insights into the basic separation mechanism of pervaporation process.
Process design and optimization of continuous-flow pervaporation technique for the dehydration of ethanol-water mixture

Huanlin Chen,Zhijun Zhou,Moe Liu

1998-01-01

Abstract:The separation properties of the membrane and two different pervaporation processes were introduced. The continuous-flow pervaporation process was designed and demonstrated. The process optimization for the dehydration of ethanol-water mixture was carried out. The number of stages and reheaters was calculated by stage-by-stage method for two kinds of cascades: with equal membrane areas per section and with 10 °C of temperature decrease per section. At the same condition, the results show that the cascade with 10 °C of temperature decrease per section has more advantages as comparing with the one with equal membrane areas per section. The developed cascade calculation makes it possible to scale up the industrial pervaporation process for alcohol dehydration.
Progresses in the Modification and Application of Poly(vinyl Alcohol) Membrane

顾瑾,李俊俊,孙余凭,张林,陈欢林

DOI: https://doi.org/10.3969/j.issn.1000-6613.2013.05.019

2013-01-01

Abstract:It is necessary to modify polyvinyl alcohol (PVA) before using it as separation membrane because of its excessive swelling. In this paper,modification methods of PVA are reviewed,including crosslinking, grafting,blending,hybridization and substitution;their advantages and disadvantages are listed;and some comments are given for problems in modification methods. The application of modified PVA membrane is presented in detail. The development and application of PVA pervaporation membrane with excellent hydrophilicity and PVA membrane with high conductivity and low methanol permeability for fuel cell are prospected,respectively.
Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

Xiuzhi Tian,Xue Jiang,Baoku Zhu,Youyi Xu

DOI: https://doi.org/10.1016/j.eurpolymj.2006.05.001

2006-01-01

Abstract:In this paper, the acetone-cast poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-co-HFP)) membranes were prepared by isothermally vacuum-dried at 60°C and were employed in pervaporation of methyl acetate (MeAc) or ethyl acetate (EtAc) dissolved water solutions. DSC study on the swelling process indicated that two states of both MeAc and EtAc in their swollen P(VDF-co-HFP) membranes might exist which were the ‘bound state’ and ‘bulk state’. In addition, relative to the pure EtAc, the pure MeAc had stronger interaction with the P(VDF-co-HFP) membrane, making for its higher solubility in and lower diffusivity through the membrane. However, there is a competition between the organic permeants/water interactions and the organic permeants/polymer interactions when the P(VDF-co-HFP) membrane was tested for its pervaporative separating properties. With respect to MeAc in its water mixtures, EtAc in its water mixtures had higher solubility in the membrane instead because of its weaker interaction with water. As a result, better separating properties (higher permeate flux and separation factor) when the P(VDF-co-HFP) membrane was in pervaporation of the EtAc/water mixtures were obtained.
Janus membrane with asymmetric wettability for efficient oil/ water separation

Boyang Tian,Baona Ren,Miaomiao Hu,Yiwen Yang,Jing Wu

DOI: https://doi.org/10.1016/j.heliyon.2023.e22534

IF: 3.776

2023-01-01

Heliyon

Abstract:The rapid development of society and industry as well as the frequent occurrence of oil spills cause the shortage of fresh water resources, which not only affects human safety and life, but also impedes the world-wide sustainable development. To address these challenges, novel membrane materials with unique wettability properties have gained significant attention, particularly in the field of oil/water separation. In this research, we modified the hydrophobic PET fabric to achieve superhydrophilic characteristics using impregnation method. Subsequently, we electrospun hydrophobic PVDF fibers onto the superhydrophilic fabric surface, and PVDF/Ca10(PO4)6(OH)2@-PET Janus membrane with asymmetric wettability was obtained. The membrane has an excellent unidirectional liquid transport capacity, and can effectively separate heavy oil or light oil, the separation efficiency is more than 90 %. The results also show that the Janus membrane can be used under alkaline conditions and has satisfactory tensile resistance and re-use performance. This work provides a new idea for Janus membrane design and effectively improves the application potential of the Janus membrane in the field of oil/water separation.
Present Study State and Perspectives of Hollow Fiber Pervaporation Membrane Separation

DONG Yongquan,ZHANG Lin,CHEN Huanlin

DOI: https://doi.org/10.3969/j.issn.1008-3103.2007.04.002

2007-01-01

Abstract:This paper summarized the present study state of hollow fiber pervaporation,including the preparation of hollow fiber support membrane,methods of composite membrane preparation,industrial application of hollow fiber pervaporation and mechanism of mass transfer in hollow fiber membrane module,some problems present in the hollow fiber pervaporation and future perspective of this study were pointed out.
Research progress of separation technologies for alcohol-water system

Lan LIN,Guoliang ZHANG,Qin MENG,Hongzi ZHANG

DOI: https://doi.org/10.3321/j.issn:1000-6613.2007.03.012

2007-01-01

Abstract:This paper introduces several separation technologies for alcohol-water system,which include not only traditional azeotropic distillation and extraction distillation,but also new membrane separation techniques,such as membrane distillation,pervaporation and membrane contactor.Meanwhile,a brief comparison of characteristics and efficiency for unit operation is made among all the separation methods.
Development of Experimental System for Pervaporation and Perstraction

YU Yan-mei,QI Rong-bin,WANG Yu-jun,LI Ji-ding

DOI: https://doi.org/10.3969/j.issn.1006-7167.2006.09.010

2006-01-01

Abstract:Based on the analysis of the evaluation process of separation performance of membranes,an experimental system was developed for pervaporation and perstraction processes.PDMS/PAN composite membranes were investigated for the pervaporative separation of n-octane/thiophene mixtures with this system.The experimental results verify the accuracy and creditability of the system developed.
Development of Separation of Acetic Acid-Water System by Pervaporation

肖剑,韩文爱,李磊,耿皎,洪梅,张志炳

DOI: https://doi.org/10.3321/j.issn:0253-4320.2001.08.004

2001-01-01

Abstract:The prospect and the presentation of separation of acetic acid water system by pervaporation are reviewed.The characters of both water selective membrane and acid selective membrane used for separating acetic acid water are summarized in detail.At the same time,the current situation of theoretical study on process of separating acetic acid water by pervaporation and existing problems are introduced.It is pointed out that the primary study should focus on the preparation of suitable membranes at present.In order to meet the requirements of membrane preparation,new membrane materials must be developed or the present materials for membrane must be modified.Solution diffusion theory has some limitation in explaining experimental phenomena.The introduction of quantum theory and molecular dynamics theory will promote the simulation study of pervaporation process.
Progress in Chitosan Pervaporation Membranes

ZHU Zhi-hui,QIAN Jin-wen

2008-01-01

Abstract:In this paper, the progress of chitosan pervaporation membranes in recent years is reviewed. Their applications in the pervaporation membrane are introduced, especially for dehydration and organic-organic liquids separation. The preparation technique and pervaporation characteristic of the membrane are also mentioned. Moreover, the existent problems of chitosan pervaporation membrane and its challenges and opportunities are discussed.
Pervaporation membranes for separation of aromatic/aliphatic mixtures

Hong Ye,Jiding Li,Yangzheng Lin,Jian Chen,Cuixian Chen,Y Hong,JD Li,YZ Lin,C Jian,CX Chen

2008-01-01

Progress in chemistry

Abstract:Separation of aromatic/aliphatic mixtures is investigated extensively owing to the great importance in petrochemical industry and environmental protection. Compared to conventional technologies, pervaporation (PV) is a promising alternative in separation of organic/aliphatic mixtures and offers many advantages such as high separation efficiency, low energy consumption and simple operation. In recent years, PV separation of aromatic/aliphatic mixtures is receiving more attentions worldwide. In this paper, a review is presented on recent progress in PV membrane materials for separation of aromatic/aliphatic mixtures. The mechanism and application of PV are discussed in brief. Special emphasis is given to the recent research process in membrane materials such as polyimide, polyurethane and so on. Furthermore, the modification methods of membrane materials are summarized in detail such as grafting, copolymerization, blending and adding transfer enhancer. The design ideas of membrane materials are suggested and the foresight development in PV membrane for separation of aromatic/aliphatic mixtures is also illustrated.
Pervaporation Separation of Xylene Isomers by Hybrid Membranes of Paas Filled with Si Lane-Modified Zeolite

Xin Y. Qu,Hang Dong,Zhi J. Zhou,Lin Zhang,Huan L. Chen

DOI: https://doi.org/10.1021/ie100256u

2010-01-01

Industrial & Engineering Chemistry Research

Abstract:Silicalite-1 zeolite was modified with 3-aminopropyltriethoxysilane (APTES) and then loaded into poly(acrylic acid) sodium (PAAS) to prepare PAAS/silicalite-1 hybrid pervaporation membranes for the separation of xylene isomer mixtures. Characterization by Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopies confirmed that chemical modification on the zeolite surface had taken place. Based on sorption equilibrium experiments, the diffusion coefficients of permeates in the membrane were obtained, and the order of the diffusion coefficients of xylene isomers was found to be D-o < D-m < D-p An investigation of the effects of the original versus modified zeolite loading on the pervaporation performance was performed. With the original zeolite, the permeation flux of the binary xylene mixtures showed little change, whereas the selectivity of the hybrid membrane exhibited some enhancement. After modification of the zeolite surface, the selectivity of the hybrid membrane was clearly improved, the permeation flux of the membrane decreased slightly, and the maximum separation factors of the p-/o-xylyne (alpha(p/o)) and p-/m-xylene (alpha(p/m)) mixtures were determined to be 2.62 and 2.68, respectively. The experimental results revealed that the modification promoted the compatibility of the PAAS and silicalite-1 zeolite interface.
Pervaporation membrane separation technology and its application

Jiding Li,Zheng Yang,Xiayang Jin,Manquan Fang,Xiang Li,Dongju Zheng

DOI: https://doi.org/10.3969/j.issn.1009-1742.2014.12.006

2014-01-01

Engineering Science

Abstract:Membrane separation technology is contemporarily a high and new technology in chemical engineering. It has been consequently developed rapidly in recent 30 years due to the availability of solving many serious problems,such as energy,resources and environment. Membrane separation technology of pervaporation as a novel separation technology is typically energy-saving and cleaner-production technology. Compared to the conventional azeotropicdis-tillation and extractive distillation applied to azeotropic systems,pervaporation process could lead to an energy saving of 1/3~1/2 and decrease operating costs even no less than 50%. The industrial applications of the pervaporation dehydration over the world are introduced,and re-search progresses and industrial feasibilities of several pervaporation membranes are shown in this paper,which cover gasoline desulfurization membranes,methanol and ethanolpermselec-tive membranes,dimerthyl carbonate/methanol and arene/alkane separation membranes.
Pervaporation membrane materials: Recent trends and perspectives

Gongping Liu,Wanqin Jin

DOI: https://doi.org/10.1016/j.memsci.2021.119557

IF: 9.5

2021-10-01

Journal of Membrane Science

Abstract:<p>Pervaporation is a molecular separation membrane technology for selective permeation of water or organic compounds from organic-water mixtures or organic-organic mixtures. The pervaporation process is controlled by thermodynamic partitioning and kinetic mobility of molecules in the membrane. The chemical property and morphology of membrane materials can be engineered to tailor the complementary sorption and diffusion coefficient and selectivity, and thus the permeability (or flux) and selectivity (or separation factor). In this review, we highlight the latest progresses of pervaporation membrane materials, including pure polymeric membranes and inorganic membranes, as well as mixed-matrix membranes and emerging two-dimensional-material membranes. Challenges and future opportunities in materials design, fabrication and structure-performance relationship are identified to develop next-generation pervaporation membranes with enhanced separation efficiency.</p>

engineering, chemical,polymer science
Progress in pervaporation separation of alcohol-ether and alcohol-ester mixtures

Lei Wang,Fei Tang,Xiaolong Han,Jian Chen,Jiding Li

2009-01-01

Abstract:Pervaporation is nowadays considered as a basic unit operation for separation of organic-organic liquid mixtures because of its efficiency in separating azeotropic and close-boiling mixtures. This review attempted to summarize the pervaporation performance of various membranes, namely chitosan, poly (vinyl alcohol), cellulose acetate, polyelectrolyte-surfactant and aromatic polymers membranes in alcohol-ether and alcohol-ester separations. Among above mentioned membranes, the membranes containing poly (vinyl alcohol) have high separation factor but low permeation flux. Although Polyelectrolyte-surfactant membranes have both high separation factor and permeation flux, they are not stable enough. Efforts are also focusing on measures to modify membrane preparation methods by cross linking, blending, filling, surface modification with the aim of changing the physical-chemical structure of the membranes and finally improving the pervaporation performance. For ethanol-ethyl tert-butyl ether separation, semi-interpenetrating polymer network can improve the permeation flux due to increase of free volume. For methanol-dimethyl carbonate separation, silicotungstic acid hydrate/chitosan hybrid membranes can improve separation factor and permeation flux at the same time. The pervaporation performance can basically meet the industrial application requirement.
A Novel Membrane Separation Technology:Pervaporation and Its Application in Environmental Protection

杨凯,陈建林,李启良,王鑫华

DOI: https://doi.org/10.3969/j.issn.1003-6504.2004.05.043

IF: 11.4

2004-01-01

Environmental Science & Technology

Abstract:Pervaporation (PV) has been mainly applied in dehydration of organic solvents and separation of organic mixtures for recent years and partly industrialized. Based on the analysis of PV principle, this paper explores the feasibility of application of PV to environmental protection, e.g., seawater desalination, wastewater treatment and environmental analysis.
Application and Reflection on the Pervaporation and Vapor Permeation Membrane Technology

LI Jiding,ZHAN Xia,GE Hong,CHEN Jian,WANG Lei,HAN Xiaolonog,CAI Weibin

DOI: https://doi.org/10.3969/j.issn.1007-8924.2011.03.020

2011-01-01

Abstract:This paper reviews the current trends of the industrial applications of pervaporation and vapor permeation membrane technology briefly.Many industrial application examples of pervaporation and vapor permeation were described in details such as dehydration in the preparation process of ethanol biofuels,dehydration of alcohols,ketones and ethers,esterification intensification by dehydration,dehydration of organic solvent,recovery of organics or VOC in wastewater,as well as separation of organic organic mixtures.Moreover,the problems and suggestions for the development of pervaporation and vapor permeation membrane technology were proposed as well.

The latest development of pervaporation separating membranes for xylene isomers

A study on separation of organics by pervaporation

Progress of Membrane Separation for Xylene Isomers

Research Progress of Separation Mechanism and the Affecting Factors of Pervaporation Through Zeolite Membrane

Comprehensive Analysis on Anomalous Phenomenon of Ethanol-Soluble PVB Membrane for Ethanol Recovery Via Pervaporation

Process design and optimization of continuous-flow pervaporation technique for the dehydration of ethanol-water mixture

Progresses in the Modification and Application of Poly(vinyl Alcohol) Membrane

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

Janus membrane with asymmetric wettability for efficient oil/ water separation

Present Study State and Perspectives of Hollow Fiber Pervaporation Membrane Separation

Research progress of separation technologies for alcohol-water system

Development of Experimental System for Pervaporation and Perstraction

Development of Separation of Acetic Acid-Water System by Pervaporation

Progress in Chitosan Pervaporation Membranes

Pervaporation membranes for separation of aromatic/aliphatic mixtures

Pervaporation Separation of Xylene Isomers by Hybrid Membranes of Paas Filled with Si Lane-Modified Zeolite

Pervaporation membrane separation technology and its application

Pervaporation membrane materials: Recent trends and perspectives

Progress in pervaporation separation of alcohol-ether and alcohol-ester mixtures

A Novel Membrane Separation Technology:Pervaporation and Its Application in Environmental Protection

Application and Reflection on the Pervaporation and Vapor Permeation Membrane Technology