Abstract:Considering the heterogeneity of the tensile strength and post-peak softening curve, failure processes of two three-point bending concrete beams are numerically modeled using FLAC. The load-CMOD curve, the distributions of the horizontal stress and plastic tensile strain in the middle span of the beam, the length of the strain localization zone and real crack, and the distributions of failed elements in tension and real crack are presented. Quantitatively, the numerical load-CMOD curves are consistent with the experimental results of C40 concrete. After the heterogeneity of the tensile strength and post-peak softening curve are considered, real cracks are initiated at several spots. Then real cracks initiated coalesce and simultaneously new real cracks are initiated. After the peak load, the increasing tendency of the length of the strain-softening region becomes slower at higher CMODs. After real cracks are initiated, the length of the strain-softening region approximately remains constant. As CMOD increases, initially, the beam does not rotate around the cross section in the middle span and then the rotational angle approximately remains constant that is followed by the rotational angle becoming larger and larger. The thickness of the tensile strain localization region is about 3 to 4 times of the element size.

Numereical Simulation of Mode Ⅱ Fracture and Failure Processes in Concrete by 3-Dimensional Nonlinear FEM

EXTEND FINITE ELEMENT NUMERICAL SIMULATION FOR CRACK PROPAGATION OF FIBER CONCRETE

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Ⅰ/Ⅱ TENSILE-SHEAR MIXED MODE FRACTURE SIMULATION BY 3D DISCRETE ELEMENT METHOD

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Three-dimensional Nonlinear Numerical Model for Concrete Fracture Analysis

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Numerical simulation of cracking of early-age concrete three-point beams

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

A sophisticated simulation for the fracture behavior of concrete material using XFEM

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

NUMERICAL SIMULATION OF FAILURE PROCESS OF THREE-POINT BENDING CONCRETE BEAM CONSIDERING HETEROGENEITY OF TENSILE STRENGTH AND POST-PEAK SOFTENING CURVE

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

New concrete cracking model established based on fracture mechanics and damage theory