Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Spatial FEM Analysis and Experiments of Continuous Curved Box Girder Bridge

An analytical method and its application for large-section PC box girder bridges

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Structural spatial analysis method of prestressed concrete box girder with corrugated steel webs

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Spatial Finite Element Analysis for Dynamic Response of Curved Thin-Walled Box Girder Bridges

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Study on the Design of Non-Uniform Continual Box-Gird with Pre-Stressed Concrete Bridge

4D Full-Scale Finite Element Analysis of Long-Span Composite Box Girder Bridges

Analysis of Prestressed Concrete Bridge with Virtual Laminated Element Method

SCHEME COMPARATION OF STRENGTHENING CONTINUOUS PRESTRESSED CONCRETE BOX GIRDER BRIDGE BY EXTERNAL PRESTRESSED CABLE

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Static Characteristic Analysis of Long Span Continuous Curved Steel Box Girder Bridge