Abstract:To study the influences of the cross-sectional shapes on the final depths of penetration, a series of experiments were carried out on the penetration of long-rod projectiles with the same cross-sectional area different cross-sectional shapes into semi-infinite metal targets. The cross-sectional shapes were machined to be circular, square and cross, respectively. These experiments were divided into two groups. In one group of experiments, the long-rod projectiles with the aspect ratio of 8 and 93W alloy cores penetrated into armor-steel target plates. In another group of experiments, the long-rod projectiles with the aspect ratio of 15 and 45 steel cores penetrated into the 45 steel target plates. Depths of penetration under different impact velocities were experimentally obtained for different cross-sectional shapes, aspect ratios, and materials of projectiles and targets, respectively. Experimental results display that the penetration abilities of the three kinds of long-rod projectiles with non-circular cross-section are higher than that of the long-rod projectiles with circular cross-section under the same working conditions. And among the four kinds of long-rod projectiles, the penetration ability of the long-rod projectiles with cross section is the highest, followed by that of the long-rod projectiles with square section. With the increase of the impact velocity, the penetration gains of the cross and square cross-section long-rod projectiles to the circular cross-section ones increase. The cross-section shape of craters penetrated by the triangular cross-section long-rod projectiles takes on arc triangle, and the cross-section shape of craters penetrated by the long-rod projectiles with square and cross sections, respectively, takes on approximate circle. After penetration of the three kinds of non-circular cross-section long-rod projectiles, cracks at certain angles with the axial direction appear in the mushroomed heads of the projectile bodies, which leading to less resistance encountered by the projectiles in the process of penetration. The reason, why the penetration abilities of three kinds of non-circular cross-section long-rod projectiles are higher than that of the circular-section long-rod projectiles, is their structural self-sharpening in the process of penetration.

Influence Factors on Penetration Effciency for Long-rod Projectile Vertically Pentrating Semi-infinite Target and Its Rules

The Study on Penetration of Constant Kinetic Energy Long-rod Penetrator and Optimal Design

Effect of Impact Velocity on the Penetration Behavior for Long-Rod Penetrator Vertically Penetrating Semi-Infinite Target

Effect of Nose Shape on Penetration Performance of Long-rod Penetrator and Its Mechanism

Study on Effect Mechanism of Aspect Ratio for Vertical Penetration of a Long-Rod Projectile

Research on anti-penetration performance of composite armor of steel/composite materials

Influence of the cross-section shapes of long rod projectile on the vertical penetration depth

Experimental Study on Penetration of Non-Circular Cross-Section Long-Rod Projectiles into Semi-Infinite Metal Target

The Influence of Ratio of Length to Diameter on the Penetrator with Enhanced Lateral Efficiency

Oblique penetration law of short-rod projectile into thin metal target

PENETRATION ANALYSIS OF LONG ROD PROJECTILES ON ROCK TARGETS

Analysis of the velocity relationship and deceleration of long-rod penetration

The Influence of Impact Speed on the Penetrator with Enhanced Lateral Effect

Influence of the Movement of Cylindrical Target Plate on the Penetrating Ability of Kinetic Energy Projectile

Study on the Dimensionless Model of High-Speed Penetration Efficiency

Dependence of penetration velocity on impact velocity at quasi-steady stage

Experimental and theoretical study on steel long-rod projectile penetration into concrete targets with elevated impact velocities

A NEW THEORETICAL MODEL FOR ARMOR-PIERCING MECHANICS

The Influence of Target Mesh on the Simulation Results of High Velocity Projectile Penetration

Numerical Investigation of Penetration Performance of Segmented Rods Penetration into Steel Target

Investigation on the influence of strength and density of jacket materials on the penetration performance of jacketed rods