Abstract:Due to the extremely low Reynolds number, the mixing of substances in laminar flow within microfluidic channels primarily relies on slow intermolecular diffusion, whereas various rapid reaction and detection requirements in lab-on-a-chip applications often necessitate the efficient mixing of fluids within short distances. This paper presents a magnetic pillar-shaped particle fabrication device capable of producing particles with planar shapes, which are then utilized to achieve the rapid mixing of multiple fluids within microchannels. During the particle fabrication process, a degassed PDMS chip provides self-priming capabilities, drawing in a UV-curable adhesive-containing magnetic powder and distributing it into distinct microwell structures. Subsequently, an external magnetic field is applied, and the chip is exposed to UV light, enabling the mass production of particles with specific magnetic properties through photo-curing. Without the need for external pumping, this chip-based device can fabricate hundreds of magnetic particles in less than 10 min. In contrast to most particle fabrication methods, the degassed PDMS approach enables self-priming and precise dispensing, allowing for precise control over particle shape and size. The fabricated dual-layer magnetic particles, featuring fan-shaped blades and disk-like structures, are placed within micromixing channels. By manipulating the magnetic field, the particles are driven into motion, altering the flow patterns to achieve fluid mixing. Under conditions where the Reynolds number in the chip ranges from 0.1 to 0.9, the mixing index for substances in aqueous solutions exceeds 0.9. In addition, experimental analyses of mixing efficiency for fluids with different viscosities, including 25 wt% and 50 wt% glycerol, reveal mixing indices exceeding 0.85, demonstrating the broad applicability of micromixers based on the rapid rotation of magnetic particles.

Micromixing Technique:One of the Key Techniques for Particle Preparation

Research Progress of Micromixers and Their Performance

Experimental Study on Micromixing Characteristics of Coaxial Mixer in Solid–Liquid Systems

Recent advances in micromixing technologies

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

An overview on state-of-art of micromixer designs, characteristics and applications

Micromixing within microfluidic devices: Fundamentals, design, and fabrication

Research on the Mechanism of Diffusion and Mixing in the Microchannel Flow and Micromixer

A State-of-the-Art Review of Mixing in Microfluidic Mixers

Controllable Preparation of Particles with Microfluidics

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Micromixing Strategies for Efficient Mixing Processes: A Comprehensive Review

Micromixing performance of nanoparticle suspensions in a micro-sieve dispersion reactor

[Application of Continuous Mixing Technology in Ethanol Precipitation Process of Salvia Miltiorrhiza by Using Micromixer].

Progress in Viscous Medium Micromixing Process Study

Microfluidic Mixing: A Review

Advances in Research of Liquid-Liquid Homogeneous Mixing Performance in Micro-Structured Devices

Mixing in a co-flow-focusing structured droplet-based micromixer

Optimization of G1 Micromixer Structure in Two-Fluid Mixing Based on CFD and Response Surface Methodology

Fabrication of Patterned Magnetic Particles in Microchannels and Their Application in Micromixers

Characterization and modeling of micromixing performance in micropore dispersion reactors