Study of Activation Effect of Anodic Current on La0.6Sr0.4Co0.2Fe0.8O3−δ Air Electrode in Solid Oxide Electrolyzer Cell

Zehua Pan,Qinglin Liu,Lan Zhang,Xiongwen Zhang,Siew Hwa Chan
DOI: https://doi.org/10.1016/j.electacta.2016.05.058
IF: 6.6
2016-01-01
Electrochimica Acta
Abstract:Electrochemical performance evolution of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) air electrode polarized with anodic current is reported in this paper. The study was conducted on three-electrode half-cells with Yttria stabilized zirconia (YSZ) electrolyte using electrochemical impedance spectroscopy under equilibrium potential. Initially, the polarization resistance (RP) tested at 800°C of the LSCF electrode sintered at 900°C is 0.25Ωcm2. During the first 20hours of testing with anodic current density of 0.2Acm−2, RP increased with a linear dependence on the square root of time, suggesting Sr surface segregation. After the first phase of tests RP stabilized at 0.68Ωcm2. Continued testing at increased current density to 0.5Acm−2 showed that RP decreased from 0.68 to 0.46Ωcm2, and again to 0.39Ωcm2 at even higher bias of 1Acm−2. Moreover, short-term tests for 129h under various currents again showed that RP decreased upon higher anodic current while increased upon lower anodic current. However, no obvious degradation on RP was shown by comparing the value before and after the test. Based on above results, the authors speculate that the application of anodic current may be able to stabilize and activate the performance of LSCF electrode through suppressing and mitigating Sr surface segregation.
What problem does this paper attempt to address?