Abstract:The gradual depletion of fossil fuels and increasing environmental pollution problems inspire researchers to seek renewable and clean energy. Lignocellulosic biomass is deemed to be a sustainable and promising resource to produce chemicals and fuels due to its abundant existence in nature. Hydrodeoxygenation (HDO) of phenolic compounds in bio-fuel is a promising technology to convert biomass materials to value-added chemicals and fuels. However, the development of highly efficient catalysts remains a great challenge. In this work, a series of N modified Ni2P-N-x/SiO2 catalysts were prepared by impregnation method. The structure of the catalysts was characterized by X-ray diffraction (XRD), N-2 physical adsorption desorption (BET), H-2 temperature programmed reduction (H-2-TPR), NH3 temperature programmed desorption (NH3-TPD), pyridine infrared (Py-FTIR), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and the influence of Ni/N molar ratio on the physicochemical properties of the catalysts was systematically investigated. Using m-cresol as a model compound, the effects of Ni/N molar ratio, reaction temperature, reaction time, and reaction pressure on the HDO performance were studied. It was found that the appropriate introduction of N element can promote the formation of smaller active particles, improve the dispersion of active components, thus enhancing the catalytic activity. The Ni2P-N-1.0/SiO2 catalyst with a Ni/N ratio of 1.0 exhibited the best HDO activity. Under the conditions of 250 degree celsius, 3 MPa, and 1 h, m-cresol conversion reached 93.2%, and the selectivity of the target product methylcyclohexane (MCH) reached 94.2%. Based on the product distribution, it can be inferred HDO of m-cresol over Ni2P-N-x/SiO2 catalyst proceeded mainly via hydrogenation-deoxygenation (HYD) pathway. Furthermore, this series of catalysts also displayed excellent recyclability, m-cresol conversion, as well as the selectivity towards MCH did not decrease obviously even after 5 successive cycles. We believe that this strategy can provide a simple and repeatable route to synthesize high-performance HDO catalysts.

Research on in Situ Hydrogenation of O-Cresol over Ni/CMK-3 Catalysts

Sol-Gel Preparation, Characterization and Hydrogenation Property of Silica Supported Ni Catalyst

Supported Nanometric Platinum–nickel Catalysts for Solvent-Free Hydrogenation of Tetralin

Preparation of Ni/SiO<sub>2</sub> catalyst in ionic liquids for hydrogenation

CuZnCoOx Multifunctional Catalyst for in Situ Hydrogenation of 5-Hydroxymethylfurfural with Ethanol As Hydrogen Carrier

Preparation of Ni/SiO 2 catalyst in ionic liquids for hydrogenation

Preparation of N Modified Ni2P-Nx/SiO2 Catalysts and Hydrodeoxygenation Performance of M-Cresol

Highly Stable and Selective Catalysts for M-Cresol Hydrogenolysis to Aromatics

Influence of Preparation Modes on Pt–Ni/CNTs Catalysts Used in the Selective Hydrogenation of Cinnamaldehyde to Hydrocinnamaldehyde

Selective Hydrogenation of Crotonaldehyde over Ir/TiO2 Catalysts: Unraveling the Metal-Support Interface Related Reaction Mechanism

Hydrodeoxygenation of m-cresol as a depolymerized lignin probe molecule: Synergistic effect of NiCo supported alloys

Catalytic in-situ hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran over Cu-based catalysts with methanol as a hydrogen donor

Crystal-phase-depended strong metal-support interactions enhancing hydrodeoxygenation of m-cresol on Ni/TiO2 catalysts

Microcalorimetric adsorption and infrared spectroscopic studies of KNi/MgAlO catalysts for the hydrogenation of acetonitrile

Non-Linear Arrhenius Behavior of m-Cresol Hydrogenation over Platinum

Liquid-phase hydrogenation of m-chloronitrobenzene over Ni-M-P amorphous alloy catalyst

Influence Of Au/Tio2 Catalyst Preparation Parameters On The Selective Hydrogenation Of Crotonaldehyde

Construction of Ni/In2O3 Integrated Nanocatalysts Based on MIL-68(In) Precursors for Efficient CO2 Hydrogenation to Methanol

Hydrogenation of Model Compounds Catalyzed by Mcm-41-Supported Nickel Phosphide

Study on the selective catalytic reduction of NO by C3 H6 with metal organic material MOF-5

Colloidal and Nanosized Catalysts in Organic Synthesis: XXVII.1 Hydrogenation of Carbonyl Compounds in the Presence of Supported Nickel Catalysts