Abstract:In this study, a computational fluid dynamics (CFD) model was developed to predict all relevant phenomena occurring during a moist heat sterilization process at a high level of temporal and spatial resolution. The developed CFD model was used to simulate the distribution of, for example, pressure, temperature, and residual air within a large-scale industrial steam autoclave (multiphase flow models), which was not published until now. Moreover, the thermodynamic behavior and distribution of fluids and temperatures inside the sterilization load were simulated and were verified with measurements. Based on the obtained sterilization temperature profiles in connection with the sterilization environment (e.g., non-condensable gases, natural convection), bacterial inactivation could be simulated. A complete moist heat sterilization process was simulated, including all relevant phenomena inside an autoclave chamber and a Peritoneal Dialysis Bag System (PDBS), which represents a complex sterilization item. To verify the simulation results, simulated pressures and temperatures were compared with measurement data for both the autoclave chamber and the PDBS. The results show that the simulated and measured values were in excellent accordance. By using the novel CFD model, the distribution of steam and residual air inside the autoclave chamber, as well as the natural convection inside the sterilization load, could be precisely predicted. To predict the inactivation of Geobacillus stearothermophilus inside different moist heat environments, the CFD model was extended with bacterial inactivation kinetics based on measurement data. The simulation results clearly indicate that our developed CFD model can be used to predict the inactivation kinetics of bacteria, depending on the sterilization temperature profile of the sterilization process as well as the moist heat sterilization environment, and to resolve the kinetics in time and space. Therefore, the developed CFD model represents a powerful tool that might be used in the future to predict, for example, "worst case" locations for any given autoclave and sterilization load or any other relevant process parameter, enabling the operator to develop an effective sterilization process.

Development of A Heat Sterilization Simulation Platform for Canned Food

Numerical Simulation Study of a Continuous Coaxial PEF Treatment Chamber

Modeling Heat Transfer in Thermal Sterilization for Canned Foods

Coupled Simulations in Colinear and Coaxial Continuous Pulsed Electric Field Treatment Chambers

Numerical Simulation of Liquid Food Sterilization in a Still Can

Research and Development of Sterilization Technology on Spores Producing Bacteria

Research progress in the optimization of thermal sterilization in canned food

A Method to Investigate Sterilization Processes and the Bacterial Inactivation Resolved in Time and Space

Software for calculating the actual lethality of canned food heat treatment processes: development and application

Optimization of microwave heating on orange sacs products

Dynamic Modeling and Control Programme Simulation for Sterilization Cauldron

Evaluation of Methodologies for Mathematical Modeling of Packaged Conductive Foods Heat Process

Dumpling Cooking - Modeling and Simulation

Optimizing the sterilization process of canned yellowfin tuna through time and temperature combination

Numerical Simulation and Experimental Study of Strength of Rectangular Steam-heated Sterilizer

Design and Application of the Dynamic Detection Platform for Testing the Micromechanical Properties of Agricultural Products

Effect of Electric Field Distribution on the Heating Uniformity of a Model Ready-to-Eat Meal in Microwave-Assisted Thermal Sterilization Using the FDTD Method

A model for heat and mass transfer in medical waste sterilization

Superheated steam processing: An emerging technology to improve food quality and safety

Recent development in the application of alternative sterilization technologies to prepared dishes: A review

Research and Application of Key Techniques for Preserving and Sterilizing Preprocessed Food Processing