Abstract:In the field of waste heat recovery, tubular moving bed heat exchangers (MBHEs) hold great promise as equipment capable of effectively handling large-sized granular materials with high temperature. To further clarify the heat and mass transfer characteristics within tubular MBHEs, this study firstly conducted detailed investigations on the contributions of different heat transfer mechanisms. The result shows that heat radiation (∼45%) and gas film heat conduction (∼42%) control the heat transfer processes involving tube walls, with an inlet particle temperature of 600 °C, tube wall temperature of 50 °C, and particle descent velocity of 2 mm/s. These contributions can be influenced by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. Additionally, for a specific particle, its heat transfer state is highly depended on where it is located. Subsequently, the time-varying and space-varying characteristics of the heat transfer processes involving tube walls are studied. The results suggest that the time-varying and space-varying characteristics are inherent in tubular MBHEs due to the difficulty to achieve complete stability. Meanwhile, temporal fluctuations intensify with an increase in the inlet particle temperature, a decrease in wall temperature, or an increase in particle descent velocity. The result of power spectral density (PSD) indicates that the heat transfer processes exhibit a degree of chaotic behavior due to the nonlinear property of sub-models, as well as the randomness in particle feeding and contacts. The space-varying characteristic is mainly determined by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. This characteristic can be observed in both the axial and circumferential directions, with the circumferential variation being more pronounced than the axial variation. Furthermore, a double-tube MBHE, a topic that has received scant attention in previous research, is investigated in comparison to a single-tube MBHE to explore the differences in heat and mass transfer between the two configurations. It indicates that under the same boundary conditions, there are differences in heat transfer results, which are attributed to the interactions between two vertically arranged tubes. These interactions are reflected in the reconstruction of particle flow patterns and the effect altering the temperature distribution for the particles or fluid surrounding the tubes. The obtained results provide valuable insights into the mass and heat transfer behaviors of particles and fluids within tubular MBHEs, laying a foundation for advancing the development of efficient tubular MBHEs.

A model for heat and mass transfer in medical waste sterilization

Modeling Heat Transfer in Thermal Sterilization for Canned Foods

Study on Pyrolysis of Medical Waste in a Rotary Kiln:Typical Component under Batch Feeding

Equilibrium analysis of simulated medical waste

Mathematical Model and Numerical Solution of the Heat Transfer Process in the Solid Adsorption System

Simulation Study on Heat and Mass Transfer Characteristics Within Tubular Moving Bed Heat Exchangers

Study on the process of medical waste disinfection by microwave technology

A Study on the Thermodynamic Model for Waste Incineration

Dynamic Modeling and Control Programme Simulation for Sterilization Cauldron

Numerical Simulation and Experimental Study of Strength of Rectangular Steam-heated Sterilizer

Heat and mass transfer model for desiccant solution regeneration process in liquid desiccant dehumidification system

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Analysis of Temperature Distribution Inside Waste Lump in Incinerator for Mass Burning

Study On The Flow And Heat Transfer Mechanism Of Moisture Porous Media For The Waste Incineration Processes

Effects of coupled heat and mass transfers in adsorbent on the performance of a waste heat adsorption cooling unit

Numerical Simulation of Heat and Mass Transfer in Sludge Low-Temperature Drying Process

Momentum and heat transfer in the adsorbent of a waste-heat adsorption cooling system

A Survey of Medical Waste Pyrolysis and Incineration Treatment

A Method to Investigate Sterilization Processes and the Bacterial Inactivation Resolved in Time and Space

Numerical and experimental investigation of the steam penetration in narrow channels during a dynamic steam sterilization cycle

Numerical Simulation and Optimization of Waste Heat Recovery in a Sinter Vertical Tank