Abstract:This study was designed to prepare functionalized multiwalled carbon nanotubes (MWNTs-COOH) incorporated chitosan membrane for separation of ethanol/water mixtures by pervaporation. The pristine MWNTs were treated by mixed acid and then functionalized by diisobutyryl peroxide. The structure and property of the functionalized MWNTs were characterized by Fourier transform infrared and Raman spectroscopies and transmission electron microscopy. A series of functionalized MWNTs incorporated chitosan membranes were prepared by solution blending method. The swelling degree of the resulting membranes. in ethanol/water mixtures was 6 times that of the pristine chitosan membrane. The permeation flux of the membranes increased significantly with increasing functionalized MWNTs content in blend membrane matrix in pervaporation. On the basis of the experiments of sorption equilibrium, the solubility and the diffusion coefficient of membranes in water, ethanol, and 90% ethanol/water mixtures were obtained. Compared with the calculated diffusion coefficient (D-90), the measured diffusion coefficient (D-90(T)) in 90% ethanol/water mixtures was higher, taking M(2) for an example, D-90 was 0.193 x 10(-6) m(2)/s, and D-90(T) was 0.41 x 10(-6) m(2)/s, which indicated the functionalized MWNTs were more prone to increased water permeation when ethanol and water penetrated into the membrane simultaneously. In addition, effects of MWNTs content in the membrane matrix and operating temperature on pervaporation performances were investigated. After introducing functionalized MWNTs, the Arrhenius activation parameters for the total permeation decreased from 28.15 to 12.91 kJ/mol, which indicated that the carbon nanotubes filled membranes were easier to penetrate and exhibited higher flux performance than a pristine membrane.

Estimation of the porosity of a chitosan–carbon nanoparticle membrane fabricated on a chip: A solute transport-based study

On-Chip Fabrication of Carbon Nanoparticle–Chitosan Composite Membrane

Numerical Study of Single Molecular Charge Sensing by FET-Integrated Nanopore Biosensor

Fabrication of Sub-Nanometer Pores on Graphene Membrane for Ion Selective Transport

Preparation and Pervaporation Property of Chitosan Membrane with Functionalized Multiwalled Carbon Nanotubes

Accurate prediction of solvent flux in sub–1-nm slit-pore nanosheet membranes

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Toward High Permeability, Selectivity and Controllability of Water Desalination with Fepc Nanopores

FABRICATION OF NANOPOROUS CHITOSAN MEMBRANES

The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances

Characterization of the Surface Charge Property and Porosity of Track-etched Polymer Membranes

A pycnometric method to estimate the porosity of hydrophobic hollow fiber membranes

A single-cell identification and capture chip for automatically and rapidly determining hydraulic permeability of cells

The Solute Rejection of a Nanoslit in Osmosis

Engineering Porosity-Tuned Chitosan Beads: Balancing Porosity, Kinetics, and Mechanical Integrity

Tracing transport of chitosan nanoparticles and molecules in Caco-2 cells by fluorescent labeling

In-Situ Grafting Hydrophilic Polymer on Chitosan Modified Poly (dimethylsiloxane) Microchip for Separation of Biomolecules

Chemically tailored microporous nanocomposite membrane with multiple transport channels for fast solvent permeation

Chemically tailored microporous nanocomposite membranes with multi-channels for intensified solvent permeation

Porous chitosan membranes by solvent evaporation technique: evaluation of the biopolymer/acetone ratio and potentiality for the membrane distillation process

Fabrication of chitosan membranes via aqueous phase separation: Comparing the use of acidic and alkaline dope solutions