Abstract:Here we propose an optical fiber sensor capable of simultaneous measurement of liquid level and temperature by utilizing cascaded long-period fiber gratings (LPFGs) inscribed on high-birefringence fiber (HBF) and a Faraday rotator mirror (FRM). Due to the in-fiber Mach-Zehnder interference and birefringence of the HBF, these cascaded LPFGs have polarization-dependent discrete interference spectra, each of which is created within one of the two different attenuation bands obtained in the two orthogonal input polarization states, e.g., linear horizontal polarization (LHP) and linear vertical polarization (LVP). The minimum transmittance dip was selected as a sensor indicator for each interference spectrum obtained for LHP or LVP input signal. To monitor these indicator dips associated with LHP and LVP, referred to as the IDH and IDV, respectively, with one spectral scanning, an FRM was connected to the end of the cascaded LPFGs. Both the IDH and IDV spectrally shifted according to liquid-level or temperature changes and showed very linear responses to them with adjusted R₂ values greater than 0.997. The liquid-level sensitivities of the IDH and IDV were measured as approximately -37.29 and -121.08 pm/mm in a liquid-level range of 0 to 55 mm, respectively. The temperature sensitivities of the IDH and IDV were measured as ˜28.79 and ˜218.21 pm/°C in a temperature range of 30 to 60 °C, respectively. Owing to their linear and independent responses to liquid level and temperature, our sensor can perform temperature-independent liquid-level measurement using their pre-determined liquid-level and temperature sensitivities, even if both liquid level and temperature change simultaneously.

Liquid Level and Temperature Sensor Based on an Asymmetrical Fiber Mach–Zehnder Interferometer Combined with a Fiber Bragg Grating

Liquid Level Measurement Based on a No-Core Fiber with Temperature Compensation Using a Fiber Bragg Grating

Temperature-insensitive Optical Fiber Reflective Micro-Liquid Level Sensor Base on the Drop Shape Quasi-Mach Zehnder Interferometer

Liquid Level Sensor Based On In-Fiber Michelson Interferometer

Liquid Level Sensor Using Fiber Bragg Grating Assisted by Multimode Fiber Core

Self-Temperature Compensated Fiber-Optic Liquid Level Sensor With Ultra-Long Linear Range Using Quasi-Single Modal Interferometer

An inline Mach-Zehnder interferometer for simultaneously measuring liquid level and temperature

High Sensitivity Optical Fiber Liquid Level Sensor Based on a Compact MMF-HCF-FBG Structure

Simultaneous Measurement of Liquid Level and Temperature Using In-Fiber Grating-Based Mach-Zehnder Interferometer and Faraday Rotator Mirror

Simultaneous Measurement of Liquid Level and Temperature Based on Spherical-Shape Structures and Long Period Fiber Grating

Thin Fiber-Based Mach-Zehnder Interferometric Sensor for Measurement of Liquid Level, Refractive Index, Temperature, and Axial Strain

Temperature-independent Fiber Bragg Grating Liquid-Level Sensor Based on Reflection Optical Power Detection

Liquid Level and Temperature Sensing by Using Dual-Wavelength Fiber Laser Based on Multimode Interferometer and FBG in Parallel

A thin-core fiber modal interferometer for liquid-level sensing

Temperature-insensitive fiber Bragg grating liquid-level sensor based on bending cantilever beam

Highly sensitive liquid level and temperature sensors based on all-fiber intermodal interferometers

A high-sensitivity liquid level sensor based on single-mode taper-thin core taper single-mode fiber structure

Liquid Level Measurement Based on FBG-Embedded Diaphragms With Temperature Compensation

Fiber Optic Liquid Level Sensor Based on Integration of Lever Principle and Optical Interferometry

Low Refractive-Index and Temperature Crosstalk Fiber-Optic Liquid Level Sensor Based on Cascaded Quasi-Microfiber and Double-Cladding Fiber Structure

Liquid Level Measurement by Applying the Mach-Zehnder Interferometer Based on Up-Tapers.