Abstract:In this letter, a new method for liquid level measurement based on in-line Mach Zehnder interferometer (MZI) in fiber ring laser cavity is proposed and experimentally demonstrated. Two cascaded peanut-shaped fiber structures are designed to implement MZI with a length of 25 mm. At the beginning, the broadband light source was used to demonstrate the possibility of MZI as a liquid level sensor. The experimental results show that the liquid level sensitivity of -1.057 nm/cm can be achieved in the detection range of 0-20 mm. However, using broadband light sources to build a sensing system has a large 3-dB spectral bandwidth and low signal-to-noise ratio in the available wavelength range. Therefore, these sensing systems may have poor resolution, low accuracy monitoring and limited detection distance. Therefore, the experiment further uses the fiber ring laser (FRL) cavity to replace the broadband light source to realize the liquid level monitoring. Thanks to narrow laser linewidth and high signal-to-noise ratio, higher detection accuracy can be obtained. MZI acts as a filter and a sensor at the same time. When the liquid level changes, the interference peak shift plays the role of filtering and wavelength selection. The results showed that the detection sensitivity was as high as -1.348 nm/cm. Accompanied by a signal-to-noise ratio of up to 50 dB and a 3-dB linewidth of less than 0.2 nm. Besides, the fiber ring laser cavity can theoretically extend the length of single-mode fiber infinitely in the cavity. Hence, the sensor designed is exemplary and representative for liquid level monitoring in unconventional areas in the far field such as: extreme geological landforms, high temperature and high-pressure regions and anaerobic areas.

Liquid Level Measurement by Applying the Mach-Zehnder Interferometer Based on Up-Tapers.

Temperature-insensitive Optical Fiber Reflective Micro-Liquid Level Sensor Base on the Drop Shape Quasi-Mach Zehnder Interferometer

A thin-core fiber modal interferometer for liquid-level sensing

A high-sensitivity liquid level sensor based on single-mode taper-thin core taper single-mode fiber structure

Liquid Level Sensor Based On In-Fiber Michelson Interferometer

All-fiber Mach-Zehnder Interferometers for Sensing Applications.

Fiber Ring Cavity Laser Based on Cascading Two Peanut-Shape Structures for Liquid Level Measurement

Thin Fiber-Based Mach-Zehnder Interferometric Sensor for Measurement of Liquid Level, Refractive Index, Temperature, and Axial Strain

An inline Mach-Zehnder interferometer for simultaneously measuring liquid level and temperature

Fiber Optic Liquid Level Sensor Based on Integration of Lever Principle and Optical Interferometry

Self-Temperature Compensated Fiber-Optic Liquid Level Sensor With Ultra-Long Linear Range Using Quasi-Single Modal Interferometer

Liquid Level and Temperature Sensor Based on an Asymmetrical Fiber Mach–Zehnder Interferometer Combined with a Fiber Bragg Grating

Thinned Fiber Based Mach-Zehnder Interferometer for Measurements of Liquid Level and Refractive Index

Liquid level sensor based on a single-mode hetero-core fiber structure

Implementation and Characterization of Liquid-Level Sensor Based on a Long-Period Fiber Grating Mach–Zehnder Interferometer

M-Z Optical Fiber Liquid Level Sensor Based on Two Cascaded Spherical-Shape Structures

Highly Modulated In-Fiber Mach–Zehnder Interferometer Based on an Ultracompact Leaky-Guided Liquid Core

High-sensitivity Liquid Level Sensor Based on Mach–Zehnder Interferometer with a Side Polished Structure

Optical Fiber Liquid Level Sensor Realized by Cascading Two Spherical-Shape Structures

An Optical Liquid Level Sensor Based on Polarization-Maintaining Fiber Modal Interferometer

In-Fiber Quasi-Michelson Interferometer for Liquid Level Measurement with A Core-Cladding-Modes Fiber End-Face Mirror