Abstract:The grain boundary segregation and precipitation and associated deformed microstructure under cryogenic-temperature and dynamic-loading conditions were systematically investigated by means of high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM) and electron back-scattered diffraction (EBSD). The studied steels exhibit equiaxed grains with a similar grain size of 12.0-13.3 mu m. The twinning and dislocation slip were observed as the main deformation modes under cryogenic-temperature and dynamic-loading conditions. However, the secondary twinning system is suppressed and plastic deformation by dislocation slip is small in the steel annealed at 800 degrees C for 3 h, leading to a significant decrease in Charpy impact toughness at - 196 degrees C. The HAADF-STEM results show that there are numerous (Cr,Mn)(23)C-6-type carbides along grain boundaries and the Cr or C peaks have been detected at grain boundaries without (Cr,Mn)(23)C-6-type carbides in the steel annealed at 800 degrees C for 3 h, whereas these carbides and Cr or C peaks were not observed in the steel annealed at 300 degrees C for 3 h. However, the Mn, P, S, Si and Cu peaks were not observed at grain boundaries in both steels by means of STEM-EDX. The critical shear twinning stress is high in the steel annealed at 800 degrees C for 3 h due to heavier grain boundary segregation. Meanwhile, the local stress concentration at grain boundaries may be relaxed because the crack may easily nucleate at grain boundaries whose cohesion is weakened by heavier grain boundary segregation or (Cr,Mn)(23)C-6-type carbides/matrix interfaces whose bonding strength is relatively small. Therefore, the secondary twinning system is relatively hardly activated and plastic deformation by dislocation slip is relatively small for the steel annealed at 800 degrees C for 3 h.

Coupled Toughening of a Low Carbon Medium Manganese Heavy Steel Plate Investigated by Electron Back–scattered Diffraction (EBSD)

High strength-toughness combination of a low-carbon medium-manganese steel plate with laminated microstructure and retained austenite

Toughening Mechanisms of A High-Strength Acicular Ferrite Steel Heavy Plate

Ensuring Combination of Strength, Ductility and Toughness in Medium-Manganese Steel Through Optimization of Nano-Scale Metastable Austenite

Dominating Role of Film‐Like Carbon‐Enriched Austenite for the Simultaneous Improvement of Strength and Toughness in Low‐Carbon Steel

Microstructural Features of a Ultra Low Carbon High Strength Acicular Ferrite Steel Thick Plate

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

Improving impact toughness of Fe–20Mn–9Al-1.5C–2Ni–3Cr low-density steel by optimizing grain boundaries via multi-stage heat treatment without compromising high strength and ductility

Effect of Welding Processes with High Heat Input on the Microstructure and Toughness of Coarse-Grained Heat-Affected Zone of a High-Strength High-Toughness Steel

Influence of banded ε-martensite and deformation twin on cryogenic toughness of Fe-Mn-xAl-C steel

The Effect of Inclusions on a Medium Temperature Transformation Microstructure and Toughness of High-Strength HSLA Steel

The combination of strength and cryogenic impact toughness in low carbon 5Mn–5Ni steel

Simultaneously Improved Strength and Impact Toughness by Introducing Ultrafine Ferrite in Low-Temperature Bainitic Steel

Grain refinement mechanism of a 700 MPa ultralow carbon bainite heavy plate steel

Interpretation of Significant Decrease in Cryogenic-Temperature Charpy Impact Toughness in a High Manganese Steel

Low Density High Strength and High Toughness Steel with Ferrite and Martensite Laminated Structure

Crystallography of Transformation Products with Different Cooling Rates in Low-Carbon Alloy Steel and Its Effect on Low-Temperature Toughness Uniformity of Heavy Plates

The co-precipitation evolution of NiAl and Cu nanoparticles and its influence on strengthening and toughening mechanisms in low-carbon ultra-high strength martensite seamless tube steel

Investigation on the Improvement of Toughness of Complex Modified Medium Manganese Austenitic Steel

Thickness Dependence of Toughness in Ultra-Heavy Low-Alloyed Steel Plate after Quenching and Tempering