Ellipsoid-like Li4Ti5O12–TiO2 Composites Constructed by Nanocrystals for Lithium Ion Batteries

Wenjun Zhu,Hui Yang,Xingzhong Guo

DOI: https://doi.org/10.1039/c5ra24347e

IF: 4.036

2016-01-01

RSC Advances

Abstract:Porous ellipsoid-like Li4Ti5O12–TiO2 composites with a unique micro/nano structure have been successfully fabricated via a facile sol–gel route followed by calcination.

What problem does this paper attempt to address?

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Hongwen Chen,Yangdan Lu,Hangjian Zhu,Yichuan Guo,Rui Hu,Rabia Khatoon,Lingxiang Chen,Yu-Jia Zeng,Lei Jiao,Jianxing Leng,Jianguo Lu

DOI: https://doi.org/10.1016/j.electacta.2019.04.134

IF: 6.6

2019-01-01

Electrochimica Acta

Abstract:Tin oxide (SnO2) is an attractive anode in lithium ion batteries (LIBs), but its applications have been significantly hampered by the huge volume change during the electrochemical cycling. In this work we demonstrate a rational design of crystalline SnO2@amorphous TiO2 core-shell nanostructures, where the crystalline SnO2 core was synthesized by a hydrothermal method and the amorphous TiO2 shell was deposited by atomic layer deposition. The SnO2@TiO2 nanostructures deliver excellent performances during the electrochemical process, having a high reversible capacity of 1259 mAh g(-1) at cycling rate of 80 mA g(-1), which is still up to 703 mAh g(-1) after 50 cycles. The acceptable rate capacity is also revealed with 412 mAh g(-1) at 400mA g(-1). The coulombic efficiency is stable at around 100% regardless of cycling rates and numbers. The electrochemical performances of the SnO2@TiO2 batteries are better than those of the SnO2 ones without TiO2 coating. In the SnO2@TiO2 nanostructures, the amorphous TiO2 shell layer can experience an isotropic stress, having the ability to evidently reduce the volume change, lattice stress and so the risk of fracture during the cycling process, which is responsible for their outstanding behaviors. The strategy provided in our study is expected to be a precious guideline for designing an ideal electrode for energy storage devices. (c) 2019 Elsevier Ltd. All rights reserved.
Sol–gel synthesis of nanocrystal-constructed hierarchically porous TiO2 based composites for lithium ion batteries

wenjun zhu,hui yang,kazuki nakanishi,kazuyoshi kanamori,xingzhong guo

DOI: https://doi.org/10.1039/c5ra03491d

IF: 4.036

2015-01-01

RSC Advances

Abstract:Hierarchically porous TiO2 based composites (pure TiO2 and TiO2/carbon (TiO2/C) composite) were synthesized by a facile sol-gel process followed by post- calcination. Poly(vinylpyrrolidone) (PVP) acts as a phase separation inducer as well as a carbon source. The as-prepared TiO2 based composites possess an interesting hierarchically porous structure constructed of cocontinuous macropores and mesoporous skeletons consisting of interconnected nanocrystals and in situ distributed carbon. The hierarchically porous TiO2/C composite shows excellent electrochemical performance with fast lithium ion diffusion and electronic transport, resulting from the hierarchically porous structure and conductive carbon material. The TiO2/C composite calcined at 500 degrees C exhibits the highest BET surface area of 170 m(2) g(-1), superior cycling stability (delivers a remarkable discharge capacity of 132 mA h g(-1) at 1 C after 100 cycles) and excellent rate capability (over 96 mA h g(-1) at 30 C rate). The results indicate that these hierarchically porous TiO2 based composites could be promising anode materials for high performance lithium ion batteries.
Facile Synthesis of Hierarchically Porous Li4Ti5O12 Microspheres for High Rate Lithium Ion Batteries

Laifa Shen,Changzhou Yuan,Hongjun Luo,Xiaogang Zhang,Ke Xu,Yongyao Xia

DOI: https://doi.org/10.1039/c0jm00348d

2010-01-01

Abstract:A novel approach has been developed to synthesize hierarchically porous Li4Ti5O12 microspheres assembled by well-crystalline nanoparticles. The fabrication process is very simple, involving only hydrothermal treatment of commercial anatase TiO2 powder in LiOH solution and a following calcination procedure without employing any surfactants or templates. Field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption/desorption analysis were used to characterize their morphologies and structures. Such Li4Ti5O12 nano/microspherical superstructures, with sizes of ca. 4 mu m in diameter, exhibits rich hierarchical pores and a specific surface area of 57.5 m(2) g(-1). A possible growth mechanism of the nano/microspherical superstructure is further discussed. The calcination temperature has a great effect on the crystal structure and electrochemical properties of the materials. The hierarchically porous Li4Ti5O12 microspheres annealed at 700 degrees C have the perfect crystallization and optimal particle size, which can deliver good coulombic efficiency, ultrahigh rate capability at high rates, and excellent capacity retention over 200 cycles.
Ionic Liquid‐Assisted Synthesis of TiO2–Carbon Hybrid Nanostructures for Lithium‐Ion Batteries

Yanhua Cheng,Zheng Chen,Haobin Wu,Meifang Zhu,Yunfeng Lu

DOI: https://doi.org/10.1002/adfm.201504134

IF: 19

2016-01-01

Advanced Functional Materials

Abstract:Building nanocomposite architectures based on nanocarbon materials (such as carbon nanotubes and graphene nanosheets) and metal‐oxide nanoparticles is of great interests for electrochemical energy storage. Here, an ionic‐liquid‐assisted strategy is presented to mediate the in situ growth of TiO2 nanocrystals with controlled size on carbon nanotubes and graphene, and also reduce the modified carbon supports to recover the graphitic structure simultaneously. The as‐prepared nanocomposites exhibit a highly porous and robust structure with intimate coupling between TiO2 nanocrystals and carbon supports, which offers facile ion and electron transport pathway as well as high mechanical stability. When evaluated as electrode materials for lithium‐ion batteries, the nanocomposites manifest high specific capacity, long cycling lifetime, and excellent rate capability, showing their promising application in high‐performance energy storage devices.
Spinel Li4Ti5O12 hollow nanospheres prepared with colloid carbon spheres as templates for high power Li-ion battery anodes

Zehua Lu

DOI: https://doi.org/10.1039/d2ce01253g

IF: 3.756

2023-01-01

CrystEngComm

Abstract:Spinel Li4Ti5O12 hollow nanospheres self-assembled with lamellar nanocrystallites have been successfully prepared by employing colloid carbon spheres as templates via a solvothermal reaction route and a subsequent calcination process. During the solvothermal treatment, the amorphous Li4Ti5O12 deposits on the colloid carbon spheres, leading to amorphous C@a-Li4Ti5O12 core-shell nanospheres. Two calcination strategies, one is to calcine the C@a-Li4Ti5O12 core-shell nanospheres in air directly and the other is to first calcine the nanospheres in inert gas of nitrogen and then in air, are investigated for controlling the microstructures of spinel Li4Ti5O12 hollow nanospheres. Based on the experimental results, the formation mechanism of the spinel Li4Ti5O12 hollow nanospheres has been discussed. The spinel Li4Ti5O12 hollow nanospheres obtained by the secondary calcination method exhibit nice capacity retention and high-rate capacity due to the smaller lamellar nanocrystallites and enhanced contact with the electrolytes.
Controllable Synthesis of Mesostructures from TiO2 Hollow to Porous Nanospheres with Superior Rate Performance for Lithium Ion Batteries.

Hao Ren,Jiajia Sun,Ranbo Yu,Mei Yang,Lin Gu,Porun Liu,Huijun Zhao,David Kisailus,Dan Wang

DOI: https://doi.org/10.1039/c5sc03203b

IF: 8.4

2016-01-01

Chemical Science

Abstract:Uniform TiO2 nanospheres from hollow, core-shell and mesoporous structures have been synthesized using quasi-nano-sized carbonaceous spheres as templates. The TiO2 nanospheres formed after calcination at 400 °C are composed of ∼7 nm nanoparticles and the shells of the hollow TiO2 nanospheres are as thin as a single layer of nanoparticles. The ultrafine nanoparticles endow the hollow and mesoporous TiO2 nanospheres with short lithium ion diffusion paths leading to high discharge specific capacities of 211.9 and 196.0 mA h g-1 at a current rate of 1 C (167.5 mA g-1) after 100 cycles, and especially superior discharge specific capacities of 125.9 and 113.4 mA h g-1 at a high current rate of up to 20 C. The hollow and mesoporous TiO2 nanospheres also show superior cycling stability with long-term discharge capacities of 103.0 and 110.2 mA h g-1, respectively, even after 3000 cycles at a current rate of 20 C.
Synthesis and electrochemical performance of Li4Ti5O12/TiO2/C nanocrystallines for high-rate lithium ion batteries

wenjun zhu,hui yang,wenkui zhang,hui huang,xinyong tao,yang xia,yongping gan,xingzhong guo

DOI: https://doi.org/10.1039/c5ra12397f

IF: 4.036

2015-01-01

RSC Advances

Abstract:A Li4Ti5O12/TiO2/carbon (Li4Ti5O12/TiO2/C) nanocrystalline composite has been successfully synthesized by a facile sol-gel method and subsequent calcination treatment. Moreover, pure Li4Ti5O12, Li4Ti5O12/C and Li4Ti5O12/TiO2 composites have also been synthesized for comparison. All the samples present a nanocrystalline structure with a uniform size distribution, and abundant phase interfaces can be detected for the Li4Ti5O12/TiO2 and Li4Ti5O12/TiO2/C composites. Electrochemical measurements demonstrate that the resultant Li4Ti5O12/TiO2/C composite exhibits a superior rate capability and cycle stability in comparison with pure Li4Ti5O12, Li4Ti5O12/C and Li4Ti5O12/TiO2 composites, which can be attributed to a high grain boundary density, abundant phase interfaces and in situ formed carbon, for storing extra lithium ions, enhancing rapid lithium insertion/extraction kinetics and improving the electron transport rate.
Structure and Electrochemical Properties of Spinel Li4ti5o12 Nanocomposites As Anode for Lithium-Ion Battery

Xiangcheng Sun,Manu Hegde,Yuefei Zhang,Min He,Lin Gu,Yongqing Wang,Jie Shu,Pavle V. Radovanovic,Bo Cui

IF: 1.541

2014-01-01

International Journal of Electrochemical Science

Abstract:Nanocomposite particles of amorphous carbon-Li4Ti5O12 (C-LTO) and carbon nanotube-Li4Ti5O12 (CNT-LTO) were synthesized by solvothermal method and subsequent high-temperature calcination. X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), and selected area electron diffraction (SAED) were applied to characterize the phase structure, particle morphology, and the coating structure. XRD analysis, TEM micrographs, HR-TEM images and SAED analysis revealed that both LTO particles exhibited a well-developed spinel nanocrystal structure with average sizes between 20-70 nm. The C-LTO particles exhibited roughly spherical shape coated by an amorphous carbon layer up to 10 nm in thickness. The CNT-LTO samples showed uniform square nanocrystals with edge length around 20 nm and nanoscale graphitic layers covering the surface, revealing the carbon nanotubes interconnection networks among the particle assemblies. Electrochemical studies of lithium insertion/extraction performance are evaluated by the galvanostatic charge/discharge tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Both LTO particles showed the superior initial discharge capacity of more than 200 mAh/g at 1/10C rate. The irreversible capacity of the C-LTO particles at more cycles was due to large polarization resulted from excessive carbon and possible residual precursors. The CNT-LTO particles show larger reversible capacity and enhanced electrochemical Li+ insertion/extraction kinetics at different cycling rates. The comparative structural and electrochemical analyses demonstrated that both nanoscale graphitic covering layers and the CNT interconnection networks increase the electronic conductivity and improve the kinetics rates of lithium insertion/extraction in the CNT-LTO particles.
Synthesis of LiTiO2 Nanocrystals/Ordered Mesoporous Carbon Composite Hosts for High-Performance Lithium-Sulfur Batteries

Changyao Wang

DOI: https://doi.org/10.1002/smsc.202300019

2023-01-01

Small Science

Abstract:Metal oxide nanocrystals/mesoporous carbon composite materials are promising in the energy storage field. However, the construction of stoichiometric ternary nanocrystals-functionalized mesoporous carbon materials remains a great challenge. Herein, the synthesis of ultradispersed and ultrasmall LiTiO2 nanocrystals/ordered mesoporous carbon composites via a chelation-mediated multicomponent coassembly strategy is reported. In this case, the self-assembly into ordered mesostructures and the crystallization of nanoparticle processes can be decoupled by the molecular chelate strategy where citrate ligands can effectively inhibit the hydrolysis and phase separation of metal oxide precursors and confine the crystallization into nanocrystals without aggregation. The obtained 33%-LiTiO2-OMC composites present a high specific surface area (approximate to 912 m(2) g(-1)), a large pore volume (approximate to 0.62 cm(3) g(-1)), a uniform pore size (approximate to 4.1 nm), and ultradispersed LiTiO2 nanocrystals (approximate to 3 nm). When loading 60% sulfur, the composites exhibit a high reversible capacity (966 mAh g(-1) after 100 cycles at 0.5C), an excellent rate capacity (700 mAh g(-1) at 5C), and a long-term cycling performance (63% retention after 1000 cycles at 5C). This method is very simple and reproducible, which paves a new way for the design and synthesis of functional mesoporous materials.
Hollow TiO2–X Porous Microspheres Composed of Well-Crystalline Nanocrystals for High-Performance Lithium-Ion Batteries

Chun Wang,Faxing Wang,Yujuan Zhao,Yuhui Li,Qin Yue,Yupu Liu,Yong Liu,Ahmed A. Elzatahry,Abdullah Al-Enizi,Yuping Wu,Yonghui Deng,Dongyuan Zhao

DOI: https://doi.org/10.1007/s12274-015-0976-7

2016-01-01

Abstract:Hollow TiO2–X porous microspheres consisted of numerous well-crystalline nanocrystals with superior structural integrity and robust hollow interior were synthesized by a facile sol-gel template-assisted approach and two-step carbonprotected calcination method, together with hydrogenation treatment. They exhibit a uniform diameter of ~470 nm with a thin porous wall shell of ~50 nm in thickness. The Brunauer-Emmett-Teller (BET) surface area and pore volume are ~19 m2/g and 0.07 cm3/g, respectively. These hollow TiO2–X porous microspheres demonstrated excellent lithium storage performance with stable capacity retention for over 300 cycles (a high capacity of 151 mAh/g can be obtained up to 300 cycles at 1 C, retaining 81.6% of the initial capacity of 185 mAh/g) and enhanced rate capability even up to 10 C (222, 192, 121, and 92.1 mAh/g at current rates of 0.5, 1, 5, and 10 C, respectively). The intrinsic increased conductivity of the hydrogenated TiO2 microspheres and their robust hollow structure beneficial for lithium ion-electron diffusion and mitigating the structural strain synergistically contribute to the remarkable improvements in their cycling stability and rate performance.
Single Crystalline Lithium Titanate Nanostructure with Enhanced Rate Performance for Lithium Ion Battery

Jun Lu,Caiyun Nan,Qing Peng,Yadong Li

DOI: https://doi.org/10.1016/j.jpowsour.2011.11.032

IF: 9.2

2011-01-01

Journal of Power Sources

Abstract:Here we report the synthesis and electrochemical performance of 40nm near-uniform lithium titanate (Li4Ti5O12) single crystals. The cubic spinel Li4Ti5O12 nanocrystals are transformed without size changes at 400°C from cubic NaCl type (Li0.4H0.6)2TiO3 nanocrystals that are prepared from hydrothermal synthesized α-Li2TiO3. The prepared Li4Ti5O12 nanocrystals show reduced charge-transfer impedance and exhibit favorable performance under high current charging/discharging due to the reduced Li+ ion diffusion path.
Lithium‐Ion Batteries: Ionic Liquid‐Assisted Synthesis of TiO2–Carbon Hybrid Nanostructures for Lithium‐Ion Batteries (adv. Funct. Mater. 9/2016)

Yanhua Cheng,Zheng Chen,Haobin Wu,Meifang Zhu,Yunfeng Lu

DOI: https://doi.org/10.1002/adfm.201670057

IF: 19

2016-01-01

Advanced Functional Materials

Abstract:M. Zhu, Y. Lu, and co-workers present an ionic liquid (IL)-assisted strategy to fabricate TiO2–carbon hybrid nanocomposites for battery anodes on page 1338. The IL mediates the in-situ growth of TiO2 nanocrystals on carbon with intimate coupling, and simultaneously reduces the modified carbon supports to recover the graphitic structure. The nanocomposites demonstrate high specific capacity, long cycling lifetime and excellent rate capability, even at low potential.
A Novel Route for the Facile Synthesis of Hierarchically Porous TiO2/graphitic Carbon Microspheres for Lithium Ion Batteries

Chengli Zhang,Qianyu Zhang,Shifei Kang,Xi Li

DOI: https://doi.org/10.1039/c3ta14252c

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Hierarchically porous TiO2/graphitic carbon microspheres synthesized by a colloidal crystal templating method, possess a specific structure and excellent electrochemical performance.
Li4Ti5O12 Prepared by a Modified Citric Acid Sol–gel Method for Lithium-Ion Battery

Chunming Zhang,Yaoyao Zhang,Jin Wang,Dan Wang,Dannong He,Yongyao Xia

DOI: https://doi.org/10.1016/j.jpowsour.2013.01.135

IF: 9.2

2013-01-01

Journal of Power Sources

Abstract:Li4Ti5O12 Was synthesized by a modified and facile sol-gel method with ethylene diamine tetraacetic acid (EDTA) and citric acid (CA) as a bi-components chelating agent. The raw precursor and powders further calcined at various temperatures and holding time were characterized by XRD, FT-IR, TG, BET and SEM. Nano-scale Li4Ti5O12 oxides, with a high phase purity and good stoichiometry, can be obtained at a calcination temperature of 750 degrees C and higher. The Li4Ti5O12 nanoparticle shows a network morphology with high dispersion, which reached a capacity of 164 and 108 mAh g(-1) at 1C and 10C discharge rate, respectively. The result of the cycling performance shows a high capacity maintenance ratio of 97% at 1C and 25 degrees C after 1000 cycles. Electrochemical lithium intercalation/extraction performance is also evaluated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) at room temperature. (C) 2013 Elsevier B.V. All rights reserved.
Porous Spinel Zn(x)Co(3-x)O(4) hollow polyhedra templated for high-rate lithium-ion batteries.

Renbing Wu,Xukun Qian,Kun Zhou,Jun Wei,Jun Lou,Pulickel M Ajayan

DOI: https://doi.org/10.1021/nn501783n

IF: 17.1

2014-01-01

ACS Nano

Abstract:Nanostructured metal oxides with both anisotropic texture and hollow structures have attracted considerable attention with respect to improved electrochemical energy storage and enhanced catalytic activity. While synthetic strategies for the preparation of binary metal oxide hollow structures are well-established, the rational design and fabrication of complex ternary metal oxide with nonspherical hollow features is still a challenge. Herein, we report a simple and scalable strategy to fabricate highly symmetric porous ternary ZnxCo3-xO4 hollow polyhedra composed of nanosized building blocks, which involves a morphology-inherited and thermolysis-induced transformation of heterobimetallic zeolitic imidazolate frameworks. When tested as anode materials for lithium-ion batteries, these hollow polyhedra have exhibited excellent electrochemical performance with high reversible capacity, excellent cycling stability, and good rate capability.
Sol-gel Design Strategy for Ultradispersed TiO2 Nanoparticles on Graphene for High-Performance Lithium Ion Batteries.

Wei Li,Fei Wang,Shanshan Feng,Jinxiu Wang,Zhenkun Sun,Bin Li,Yuhui Li,Jianping Yang,Ahmed A. Elzatahry,Yongyao Xia,Dongyuan Zhao

DOI: https://doi.org/10.1021/ja4100723

IF: 15

2013-01-01

Journal of the American Chemical Society

Abstract:The rational design and controllable synthesis of strongly coupled inorganic/graphene hybrids represents a long-standing challenge for developing advanced catalysts and energy-storage materials. Here, we report a simple sol gel method toward creating ultradispersed TiO2 nanoparticles on graphene with an unprecedented degree of control based on the precise separation and manipulation of nanoparticles nucleated, grown, anchored, and crystallized and the reduction of graphene oxide (GO). The hybrid materials show ultradispersed anatase nanoparticles (similar to 5 nm), ultrathin thickness (<= 3 layers), and a high surface area of similar to 229 m(2)/g and exhibit a high specific capacity of similar to 94 mA h g(-1) at similar to 59 C, which is twice as that of mechanically mixed composites (similar to 41 mA h g(-1)), demonstrating the potential of strongly synergistic coupling effects for advanced functional systems.
Anatase/Rutile Tio2 Nanocomposite Microspheres with Hierarchically Porous Structures for High-Performance Lithium-Ion Batteries

Junyao Shen,Hai Wang,Yu Zhou,Naiqing Ye,Guobao Li,Linjiang Wang

DOI: https://doi.org/10.1039/c2ra20962d

IF: 4.036

2012-01-01

RSC Advances

Abstract:A new anatase/rutile TiO2 nanocomposite microspheres (ART) electrode with hierarchically porous structures was successfully synthesized by a one-step route under mild hydrothermal conditions. The morphology, crystal structure and phase composition, specific surface area and pore size distribution of the obtained nanocomposite were systematically investigated by X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM) and nitrogen adsorption–desorption measurements. The as-synthesized nanocomposite microspheres electrodes exhibited superior specific capacity and high-rate charge–discharge performance for lithium-ion batteries (LIBs) (∼103 mA h g−1 at 30 C after 100 charge–discharge cycles, 1 C = 170 mA g−1) as compared to commercial TiO2 nanoparticles (P25). The improvement is mainly attributed to enhanced Li-ion diffusion and efficient charge transport as evidenced from cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements. Most importantly, the materials architecture used in this study, comprising of dual-phase TiO2 nanocrystals with hierarchically porous structures would be a general concept that could be applicable in the development of other mixed-phase electrode materials for rechargeable lithium-ion batteries and supercapacitors.
Synthesis of sandwich-like TiO 2@C composite hollow spheres with high rate capability and stability for lithium-ion batteries

Lichen Liu,Qi Fan,Chuanzhi Sun,Xianrui Gu,Hao Li,Fei Gao,Yanfeng Chen,Lin Dong

DOI: https://doi.org/10.1016/j.jpowsour.2012.07.105

IF: 9.2

2013-01-01

Journal of Power Sources

Abstract:Novel sandwich-like TiO2@C composite hollow spheres with {001} facets exposed are obtained through hydrothermal carbon-coating treatment for the first time. Based on investigations by transmission electron microscopy (TEM), scanning electron microscopy (FESEM), XRD, laser Raman spectra, and N2 adsorption–desorption isotherms, TiO2 shells are proved to be wrapped in porous carbon layers, which provide conductive support for TiO2, resulting the improvement in electronic conductivity and diffusion of Li+. Moreover, these TiO2 shells expose the reactive {001} facets, which facilitate Li+ insertion/extraction. Through combining the above advantages, TiO2@C composite hollow spheres show more superior rate capability and higher stability than TiO2 nanoparticles (Degussa P25), TiO2 nanosheets with {001} facets exposed, and TiO2 hollow spheres before carbon-coating. This method may be extended to synthesize other sandwich-like composite hollow spheres for energy storage.
Synthesis Of Uniform Tio2@Carbon Composite Nanofibers As Anode For Lithium Ion Batteries With Enhanced Electrochemical Performance

Zunxian Yang,Guodong Du,Qing Meng,Zaiping Guo,Xuebin Yu,Zhixin Chen,Tailiang Guo,Rong Zeng

DOI: https://doi.org/10.1039/c2jm14852h

2012-01-01

Journal of Materials Chemistry

Abstract:Very large area, uniform TiO2@ carbon composite nanofibers were easily prepared by thermal pyrolysis and oxidization of electrospun titanium(IV) isopropoxide/polyacrylonitrile (PAN) nanofibers in argon. The composite nanostructures exhibit the unique feature of having TiO2 nanocrystals encapsulated inside a porous carbon matrix. The unique orderly-bonded nanostructure, porous characteristics, and highly conductive carbon matrix favour excellent electrochemical performance of the TiO2@ carbon nanofiber electrode. The TiO2@ carbon hybrid nanofibers exhibited highly reversible capacity of 206 mAh g(-1) up to 100 cycles at current density of 30 mA g(-1) and excellent cycling stability, indicating that the composite is a promising anode candidate for Li-ion batteries.
Rigid TiO2- x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes

Yongli Yu,Gang Li,Xu Chen,Weiguo Lin,Junfeng Rong,Wensheng Yang

DOI: https://doi.org/10.1039/c8ra01661e

2018-04-23

Abstract:Rigid oxygen-deficient TiO2-x coated mesoporous hollow Si nanospheres with a mechanically and electrically robust structure have been constructed through a facile method for high-performance Li-ion battery anodes. The mesoporous hollow structure provides enough inner void space for the expansion of Si. The oxygen-deficient TiO2-x coating has functions in three aspects: (1) avoiding direct contact between Si and the electrolyte; (2) suppressing the outward expansion of the mesoporous hollow Si nanospheres; (3) improving the conductivity of the composite. The combined effect leads to high interfacial stability and structural integrity of both the material nanoparticles and the whole electrode. By virtue of the rational design, the composite yields a high reversible specific capacity of 1750.4 mA h g-1 at 0.2 A g-1, an excellent cycling stability of 1303.1 mA h g-1 at 2 A g-1 with 84.5% capacity retention after 500 cycles, and a high rate capability of 907.6 mA h g-1 even at 4 A g-1.

Ellipsoid-like Li4Ti5O12–TiO2 Composites Constructed by Nanocrystals for Lithium Ion Batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Sol–gel synthesis of nanocrystal-constructed hierarchically porous TiO2 based composites for lithium ion batteries

Facile Synthesis of Hierarchically Porous Li4Ti5O12 Microspheres for High Rate Lithium Ion Batteries

Ionic Liquid‐Assisted Synthesis of TiO2–Carbon Hybrid Nanostructures for Lithium‐Ion Batteries

Spinel Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> hollow nanospheres prepared with colloid carbon spheres as templates for high power Li-ion battery anodes

Controllable Synthesis of Mesostructures from TiO2 Hollow to Porous Nanospheres with Superior Rate Performance for Lithium Ion Batteries.

Synthesis and electrochemical performance of Li4Ti5O12/TiO2/C nanocrystallines for high-rate lithium ion batteries

Structure and Electrochemical Properties of Spinel Li4ti5o12 Nanocomposites As Anode for Lithium-Ion Battery

Synthesis of LiTiO<sub>2</sub> Nanocrystals/Ordered Mesoporous Carbon Composite Hosts for High-Performance Lithium-Sulfur Batteries

Hollow TiO2–X Porous Microspheres Composed of Well-Crystalline Nanocrystals for High-Performance Lithium-Ion Batteries

Single Crystalline Lithium Titanate Nanostructure with Enhanced Rate Performance for Lithium Ion Battery

Lithium‐Ion Batteries: Ionic Liquid‐Assisted Synthesis of TiO2–Carbon Hybrid Nanostructures for Lithium‐Ion Batteries (adv. Funct. Mater. 9/2016)

A Novel Route for the Facile Synthesis of Hierarchically Porous TiO2/graphitic Carbon Microspheres for Lithium Ion Batteries

Li4Ti5O12 Prepared by a Modified Citric Acid Sol–gel Method for Lithium-Ion Battery

Porous Spinel Zn(x)Co(3-x)O(4) hollow polyhedra templated for high-rate lithium-ion batteries.

Sol-gel Design Strategy for Ultradispersed TiO2 Nanoparticles on Graphene for High-Performance Lithium Ion Batteries.

Anatase/Rutile Tio2 Nanocomposite Microspheres with Hierarchically Porous Structures for High-Performance Lithium-Ion Batteries

Synthesis of sandwich-like TiO 2@C composite hollow spheres with high rate capability and stability for lithium-ion batteries

Synthesis Of Uniform Tio2@Carbon Composite Nanofibers As Anode For Lithium Ion Batteries With Enhanced Electrochemical Performance

Rigid TiO2- x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes