Abstract:The present work addresses the topic of automated calibration of numerical models starting from the experimental characterization of the structure's dynamic behaviour. The importance of the topic is well known in the literature, especially in cases where it is necessary to have at disposal validated numerical models, necessary for the correct evaluation of the safety of existing buildings. Generally, the calibration problem is developed with a manual approach (manual tuning), with a positive outcome whenever there is a good knowledge of the boundary and internal constraint conditions and the elastic mechanical properties of the construction's constituent materials. Conversely, the positive outcome is particularly difficult to achieve manually when there are non-homogeneous and/or complex structures, as in the cases of historic masonry structures, which are often the result of constructions carried out at different times, organized in aggregates whose interaction between the portions is not simple to understand. For this purpose, the present work, using commercial software and specially prepared routines, illustrates a semi-automatic procedure, which employs genetic algorithms, suitable for the optimized identification of the numerical model that best represents the structure's experimental dynamic behaviour. The procedure is presented with reference to two case studies: the Gabbia Tower historic masonry aggregate in Mantua and the bell tower of the Monastery of the Ursuline nuns in Capriolo, Brescia. In the first case, in addition to the experimental dynamic characterization, a good instrumental characterization of the tower's masonry mechanical properties is available. In the second case, alongside a good experimental dynamic characterization, only a qualitative estimate of the masonry mechanical properties, based on visual inspections, is available. The two case studies allow for testing the validity of the numerical models' calibration procedure, necessary for their application in the field of safety checks. Finally, for the case studies analysed the work presents an assessment of seismic vulnerability starting from the models identified with the semi-automatic procedure. The seismic vulnerability assessment was obtained using non-linear static analysis following the N2 method.

Development of nomograms for the prediction of inherent geometric defects in stone block pavements

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

Genetic Algorithm-Based Optimization Procedure for the Seismic Retrofitting of Existing Masonry Structures

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

ANUB-Aggregates: a fully automatic NURBS-based software for advanced local failure analyses of historical masonry aggregates

A BIM-Based Approach for Pavement Monitoring Integrating Data from Non-Destructive Testing Methods (NDTs)

A New Analytical Solution for Calculating Rock Block Volume

VIRTUAL INSPECTION BASED ON 3D SURVEY SUPPORTING RISKS DETACHMENT ANALYSIS IN PIETRAFORTE STONE BUILT HERITAGE

Study of ornamental granitoid slabs for structural properties of ventilated façades and raised access flooring systems

Calibrating failure surfaces for vertically perforated clay block masonry using a validated numerical unit cell model

A mason-inspired pattern generator for historic masonry structures using quality indexes

Macromechanical Failure Criteria: Elasticity, Plasticity and Numerical Applications for the Non-Linear Masonry Modelling

Geometrical digital twins of the as-built microstructure of three-leaf stone masonry walls with laser scanning

Evaluation of vertical irregularity effects of historical masonry buildings through a simplified procedure: the case of Florence city center

Integrating Non-Destructive Surveys into a Preliminary BIM-Oriented Digital Model for Possible Future Application in Road Pavements Management

Simulating the damage of rubble stone masonry walls using FDEM with a detailed micro-modelling approach

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

Development of a 2D and 3D computational algorithm for discontinuity structural geometry identification by artificial intelligence based on image processing techniques

Natural stone heterogeneities and discontinuities: an overview and proposal of a classification system

Semi-automatic calibration of numerical models for the seismic safety assessment of masonry towers embedded in building aggregates

Design of Concrete Mock-Ups with Complex Defect Scenarios Using Numerical Simulations