Abstract:LaBr3 scintillation detectors are widely used in energy and TOF measurement for its excellent energy resolution and time resolution. However, due to the effect of intrinsic radioactive isotopes like Ac-227 in LaBr3, it's important to discriminate the alpha background from high energy gamma-rays in low activity measurement. Generally, the pulse shape discrimination (PSD) methods are necessary to be deployed in this measurement situation to achieve this target. Therefore, how to choose a PSD algorithm and corresponding data acquisition system (DAQ) naturally becomes a critical problem to settle down. In this paper, the relationship between the classification performance of different PSD algorithms and digitizers' sampling properties (sampling rate and effective number of bits) has been researched based on a LaBr3 scintillation detector. A self-developed integrated digitizer system with 6 different ADCs is deployed to digitize the waveforms, and three PSD algorithms, charge comparison method (CCM), least square for classification method (LS) and Fisher's linear discriminant analysis (LDA), based on linear model are also applied. With the LDA method and a 125 MSPS 16-Bit ADC, the figure-of-merits (FoM) value is, which is similar to the discrimination capability from LS but much better than CCM. The results of this paper may be helpful for the developers of detector system to make a trade-off among DAQ's sampling properties, desirable discrimination performance and cost of system.

FPGA-based Α/γ Pulse Shape Discrimination for BaF 2 Detector Using 2-GSPS Fast Waveform Sampling

Alpha–Gamma Discrimination in BaF2 Using FPGA-Based Feedforward Neural Network

A Real-Time N/γ Digital Pulse Shape Discriminator Based on FPGA

FPGA-Based Real-Time $n/\gamma$ Discrimination with Liquid Scintillator

Real-time Signal Processing in Field Programmable Gate Array Based Digital Gamma-Ray Spectrometer

A Fpga-Based Pulse Pile-Up Rejection Technique for the Spectrum Measurement in Pgnaa

An FPGA-based Time Sampling Charge Measurement Method for TOF-PET Detectors

Preliminary Design of a FADC Readout System for the Alpha/Beta Discrimination in a Large Area Plastic Scintillation Detector

Evaluation Software for BaF2 Detector Array Electronics at CSNS–WNS

Design of multi-channel pulse amplitude analyzer based on FPGA

2-Dimension Pulse Shape Discriminatior for Phoswich Detector Based on FPGA

Performance of Linear PSD Methods on Α/γ Discrimination for LaBr3 : Ce Scintillation Detectors with Different Sampling Properties

Clock Distributing for BaF2 Readout Electronics at CSNS-WNS

A triangular-trapezoidal dual-channel shaping algorithm for resistive anode readout systems and its FPGA implementation

Combo Fadc Readout System with 8-Channel 14-Bit 100mhz Fadc and 2-Channel 12-Bit 2ghz Fadc for Hpge Detector

Implementation of FPGA based real-time digital DAQ for high resolution, and high count rate nuclear spectroscopy application

Clock Distribution for BaF 2 Readout Electronics at CSNS-WNS

Prototype of Field Waveform Digitizer for BaF2 Detector Array at CSNS-WNS

Development of an FPGA‐Based Pulse‐Height Analyzer for Scintillation Detectors in Gamma Energy Spectroscopy

An FPGA-Based Fast Linear Discharge Readout Scheme Enabling Simultaneous Time and Energy Measurements for TOF-PET Detectors

A pulse selection algorithm for SiPM-coupled CLYC detectors