Abstract:Flexible implantable microelectrodes have been demonstrated to exhibit excellent biocompatibility for chronic neural activity recordings. However, the low bending strength of the commonly employed flexible materials presents a significant challenge for probe insertion into the brain. Traditional implantation methods for flexible electrodes generally require additional auxiliary materials or tools, which tend to have a much larger footprint than the probes themselves, greatly increasing the damage to neurons during insertion. Here we have proposed a stiffness-tunable polyimide probe for deep brain implantation, referred to as Neurotentacle, enabled by embedded microchannels in which the liquid pressure is controllable (from 0.1MPa to more than 2.0MPa). During the insertion phase into the brain, the neurotentacle can pose a high stiffness under elevated internal pressure to penetrate the brain tissues without the use of any additional materials or tools. Once the device has been successfully inserted, it can regain its flexibility by reducing the internal pressure. Importantly, the novel multilayer microfabrication process keeps the structural dimensions of the neurotentacle similar to those of a regular flexible probe. Therefore, the neurotentacle can produce an extremely low level of damage to brain tissue during its insertion phase, while extending its long-term biocompatibility and stability, which has been experimentally verified in histological evaluations conducted on both acute and chronic animal specimens. In addition, the chronically implanted neurotentacles enabled stable neural activity recordings in mice with an average spike yield of 96% and an average signal-to-noise ratio of 15.2. The proposed neurotentacle does not necessitate the use of complex devices and its insertion process is straightforward and highly controllable, thus rendering it an appealing technique for minimally invasive implantation and long-term neural recording of flexible electrodes.

Uniaxial extending neural probes for bleeding-absent implantation

Mechanics Strategies for Implantation of Flexible Neural Probes

Flexible Intracortical Probes for Stable Neural Recording: from the Perspective of Structure

Biomimetic Flexible Neuro-Probe System for Early Warning with Force Feedback to Avoid Vascular Damage

Mechanically adaptive and deployable intracortical probes enable long-term neural electrophysiological recordings

An Ultrathin Low-Invasive Flexible Probe for Accurate Neural Stimulating

A Removable Insertion Shuttle for Ultraflexible Neural Probe Implantation with Stable Chronic Brain Electrophysiological Recording

A Tassel-Type Multilayer Flexible Probe for Invasive Neural Recording

Implantation-assistance-free Flexible Waveguide Probe for Optogenetic Stimulation

Flexible deep brain neural probes based on a parylene tube structure

Ultraflexible Neural Probes for Multidirectional Neuronal Activity Recordings over Large Spatial and Temporal Scales.

Parallel, minimally-invasive implantation of ultra-flexible neural electrode arrays

A mosquito mouthpart-like bionic neural probe

Stiffness-tunable neurotentacles for minimally invasive implantation and long-term neural activity recordings

Vibration-Assisted Insertion of Flexible Neural Microelectrodes With Bio-Dissolvable Guides for Medical Implantation

Transient shuttle for a widespread neural probe with minimal perturbation

A Fiber-Shaped Neural Probe with Alterable Elastic Moduli for Direct Implantation and Stable Electronic-Brain Interfaces.

Silk-Backed Structural Optimization of High-Density Flexible Intracortical Neural Probes

A Flexible and Stretchable Kirigami-Inspired Implantable Neural Probe with Floating Microsites for Electrophysiology Recordings

Multimodal Integrated Flexible Neural Probe for in Situ Monitoring of EEG and Lactic Acid

Ultraflexible endovascular probes for brain recording through micrometer-scale vasculature