Abstract:This article presents a $D$ -band Doherty power amplifier (PA) featuring a low-loss and compact slotline-based eight-way power combiner to improve the saturated output power and power back-off (PBO) efficiency. The proposed combiner consists of grounded coplanar waveguides (GCPWs), slotlines, and SLOT-GCPW coupling structures. Instead of the conventional transformer structure, the proposed SLOT-GCPW coupling structure effectively reduces insertion loss, increases the common-mode rejection, and encounters a comfortable symmetrical compact layout. More importantly, the proposed combiner can also be applied to achieve impedance inverters for active load modulation in a compact size. Based on the proposed multiway combining Doherty PA prototype, a high-efficiency and high-output $D$ -band PA is implemented in a 130-nm SiGe bipolar CMOS (BiCMOS) with ${f_{t}/f_{\max }}$ of 350/450 GHz. The extremely compact power combiner leads to a small PA core area of $1.1 \times 0.53$ mm2. The PA achieves a peak small-signal gain of 21.8 dB with 3-dB bandwidth from 107 to 135 GHz. At 110/120/130 GHz, the PA achieves 22.7/22.6/22.4 dBm ${P_{\mathrm{ sat}}}$ with 18.7%/17.2%/16.1% peak power-added efficiency (PAE) and 12.1%/11.7%/9.8% PAE at 6-dB PBO from ${P_{\mathrm{ sat}}}$ . Modulation measurement with single-carrier 16-quadrature amplitude modulation (QAM) and 64-QAM signals has been performed. For a 2-GHz 16-QAM signal, the PA achieves 13.74 dBm ${P_{\mathrm{ avg}}}$ and 7.88% average collector efficiency with 11.6% error vector magnitude (EVM) at 131.5 GHz. The PA also supports a 2-GHz 64-QAM signal, achieving 13.76 dBm ${P_{\mathrm{ avg}}}$ and 7.92% average collector efficiency with 11.9% EVM at 131.5 GHz.

A 26.5-40 GHz Stacked Power Amplifier in 130 Nm SiGe BiCMOS Technology

A 30Mhz-3Ghz 1W Stacked-Fet GaAs MMIC Power Amplifier.

A 60GHz power amplifier with 12.1 dBm & P1dBCP in 0.18um SiGe BiCMOS process

A W-band current combined power amplifier with 14.8dBm Psat and 9.4% maximum PAE in 65nm CMOS

A 68.5~90 GHz High-Gain Power Amplifier with Capacitive Stability Enhancement Technique in 0.13 Μm SiGe BiCMOS

A K-Band Differential SiGe Stacked Power Amplifier Based on Capacitive Compensation Techniques for Gain Enhancements

Design and Analysis of a 26–34.5-Ghz Power Amplifier with Balanced Mismatch Reduction and Interstage Matching

A 100–117 GHz W-Band CMOS Power Amplifier With On-Chip Adaptive Biasing

A 24-Ghz Voltage-Combined Stacked Power Amplifier with Current-Sharing Technique in 65-Nm CMOS

A 60㎓ Power Amplifier with 12.1 ㏈m & P1㏈CP in 0.18㎛ SiGe BiCMOS Process

A Compact Multilayer-Stacked Guanella Transformer Based 50–680-Mhz GaAs Power Amplifier

Fully integrated pseudo differential K-band power amplifier in 0.13um standard CMOS

A 22.8 GHz to 32.8 GHz Compact Power Amplifier with a 15 Dbm Output P1dB and 36.5% Peak PAE in 65-Nm CMOS.

A 6.3 Dbm 258-314 GHz Power Amplifier Using a Broadband 8-Way SQWL Power Combiner in 130-Nm SiGe BiCMOS Technology

A 140- and 220-Ghz Dual-Band Amplifier in 130-Nm SiGe BiCMOS Process

A 160 GHz High Output Power and High Efficiency Power Amplifier in a 130-Nm SiGe BiCMOS Technology

A 110-to-130 GHz SiGe BiCMOS Doherty Power Amplifier with a Slotline-Based Power Combiner

A V-Band Wideband Power Amplifier with High Gain in a 130 nm SiGe BiCMOS Process

A 206-264 GHz Power Amplifier Based on a High-Linearity Cascode Core With 15 dB Gain and 12.2-dBm P sat in 130-nm SiGe BiCMOS

A C Band Fully-integrated SiGe BiCMOS Power Amplifier

A 110-to-130ghz SiGe BiCMOS Doherty Power Amplifier with Slotline-Based Power-Combining Technique Achieving >22dbm Saturated Output Power and >10% Power Back-off Efficiency.