Abstract:Core-shell absorbent granules are produced by coating commercial sand gravels with graphite oxide (few-layer oxidized graphene sheets). Graphite oxide (GO) is synthesized chemically from vein graphite, a rare form of high purity natural graphite. Repeated coatings of graphite oxide on sand followed by low temperature (1200 C) thermal pyrolysis produce core-shell granules with a hierarchical structure in which sand gravels are covered by graphite oxide layers. The intention of this study is to assessment of feasibility of the mitigation of Pb (II) form the water by sand/graphene oxide nano-composite and study the dynamic behavior of the adsorption mechanism using the mathematical modeling. Individual materials and the resulting nanocomposite are characterized using a range of spectroscopic (FTIR, XRD, XPS) and microscopic (SEM/EDXA) techniques to elucidate the process of transforming individual materials into nanocomposite and to assess its suitability for removing Pb (II) from water. Stable sand/graphite oxide nanocomposites were obtained upon five times coating of GO on the sand surface and characterization shows that functionalized and a porous coating developed on the sand. The Pb (II) removal efficiency increases from high-acidic to neutral pH and decreases after basic (pH-8). The adsorption process takes 150 minutes to reach the equilibrium. After 150 minutes, the Pb (II) ion adsorption rate was constant. The maximum dosage of the nanocomposite needed to reach the equilibrium was 0.06g. Under the optimum conditions, 96.3% of Pb (II) removal efficiency was recorded from simulated Pb (II) containing water. According to the mathematical modeling, adsorption follows the Langmuir isotherm and fits well with the pseudo 2nd order kinetics model, indicating a homogeneous adsorption process via a monolayer process and Pb adsorbed onto the surface of the sand/GO nanocomposite by chemisorption. Sand/GO nanocomposite is an excellent candidate for removing Pb (II) from contaminated water. Keywords: Adsorption, Graphene oxide, Sand, Water treatment

Mechanistic Insights into Pb(II) Removal from Aqueous Solution by Green Reduced Graphene Oxide.

Synthesis and Characterization of Reduced Graphene Oxide-Supported Nanoscale Zero-Valent Iron (nzvi/rgo) Composites Used for Pb(II) Removal

Preparation of Reduced Graphene Oxide/poly(acrylamide) Nanocomposite and Its Adsorption of Pb(II) and Methylene Blue.

Synthesis of Molybdenum Disulfide/reduced Graphene Oxide Composites for Effective Removal of Pb(II) from Aqueous Solutions.

Removal of Pb(II) ions from aqueous solutions on few-layered graphene oxide nanosheets.

Removal of Pb(H) Ions from Aqueous Solution by Thiol-Functionalized Graphene Oxide

Graphene Oxide Adsorption Enhanced by Attapulgite to Remove Pb (II) from Aqueous Solution

One-Pot Hydrothermal Synthesis of Rgo-Fe3o4 Hybrid Nanocomposite for Removal of Pb(Ii) Via Magnetic Separation

The critical role of oxidative debris in the adsorption and desorption of Pb(II) to graphene oxides under alkaline groundwater conditions

A Facile Synthesis of RGO-Ag2MoO4 Nanocomposites for Efficient Lead Removal from Aqueous Solution

Hierarchical 13X zeolite/reduced graphene oxide porous material for trace Pb (II) capturing from drinking water

Efficient removal of Pb(II) and Cd(II) ions from wastewater using amidoxime functionalized graphene oxide

Efficient Removal of Pb(Ii) from Water Using Magnetic Fe3s4/Reduced Graphene Oxide Composites

Synthesis and Characterization of Amino-Grafted Attapulgite/graphene Oxide Nanocomposites and Their Adsorption for Pb(II) Removal

A biological-based adsorbent for a non-biodegradable pollutant: Modeling and optimization of Pb (II) remediation using GO-CS-Fe3O4-EDTA nanocomposite

A Highly Efficient Adsorbent Based on Starch-Graphene Oxide Architecture for Scavenging Aqueous Pb(II): Isotherms, Kinetics, Thermodynamics and Interaction Mechanism

Aqueous Metal Ions Adsorption by Poly(ethylene Glycol)-Modified Graphene Oxide: Surface Area and Surface Chemistry Effects

Enhanced Selective Electrosorption of Pb2+ from Complex Water on Covalent Organic Framework-Reduced Graphene Oxide Nanocomposite

Tartaric Acid Modified Graphene Oxide As a Novel Adsorbent for High-Efficiently Removal of Cu(II) and Pb(II) from Aqueous Solutions

Preparation of Functionalized Graphene Oxide Composite Spheres and Removal of Cu2+ and Pb2+ from Wastewater

Core-Shell Adsorbent Granules Fabricated from Sand/Graphene Oxide Nano-Composite for Adsorptive Removal of Pb (II)